# This is a BitKeeper generated patch for the following project:
# Project Name: Linux kernel tree
# This patch format is intended for GNU patch command version 2.5 or higher.
# This patch includes the following deltas:
# ChangeSet 1.585 -> 1.586
# drivers/usb/net/usbnet.c 1.17 -> 1.18
#
# The following is the BitKeeper ChangeSet Log
# --------------------------------------------
# 02/04/06 [EMAIL PROTECTED] 1.586
# USB usbnet driver update
#
# - adds ethtool support (based on code from Brad Hards)
# - makes diagnostic level configurable (ethtool, module param)
# - fixes a minor mem_flags goof (thanks Oliver!)
# - device identifers now use devpath (stable ID) not devnum
# --------------------------------------------
#
diff -Nru a/drivers/usb/net/usbnet.c b/drivers/usb/net/usbnet.c
--- a/drivers/usb/net/usbnet.c Mon Apr 8 15:49:31 2002
+++ b/drivers/usb/net/usbnet.c Mon Apr 8 15:49:31 2002
@@ -1,6 +1,6 @@
/*
* USB Host-to-Host Links
- * Copyright (C) 2000-2001 by David Brownell <[EMAIL PROTECTED]>
+ * Copyright (C) 2000-2002 by David Brownell <[EMAIL PROTECTED]>
*/
/*
@@ -62,6 +62,7 @@
* 18-dec-2000 (db) tx watchdog, "net1080" renaming to "usbnet", device_info
* and prolific support, isolate net1080-specific bits, cleanup.
* fix unlink_urbs oops in D3 PM resume code path.
+ *
* 02-feb-2001 (db) fix tx skb sharing, packet length, match_flags, ...
* 08-feb-2001 stubbed in "linuxdev", maybe the SA-1100 folk can use it;
* AnchorChips 2720 support (from spec) for testing;
@@ -83,6 +84,11 @@
* tie mostly to (sub)driver info. Workaround some PL-2302
* chips that seem to reject SET_INTERFACE requests.
*
+ * 06-apr-2002 Added ethtool support, based on a patch from Brad Hards.
+ * Level of diagnostics is more configurable; they use device
+ * location (usb_device->devpath) instead of address (2.5).
+ * For tx_fixup, memflags can't be NOIO.
+ *
*-------------------------------------------------------------------------*/
#include <linux/config.h>
@@ -93,6 +99,8 @@
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/random.h>
+#include <linux/ethtool.h>
+#include <asm/uaccess.h>
#include <asm/unaligned.h>
// #define DEBUG // error path messages, extra info
@@ -113,6 +121,8 @@
#define CONFIG_USB_PL2301
+#define DRIVER_VERSION "06-Apr-2002"
+
/*-------------------------------------------------------------------------*/
/*
@@ -164,6 +174,7 @@
// protocol/interface state
struct net_device net;
struct net_device_stats stats;
+ int msg_level;
#ifdef CONFIG_USB_NET1080
u16 packet_id;
@@ -224,6 +235,13 @@
size_t length;
};
+static const char driver_name [] = "usbnet";
+
+/* use ethtool to change the level for any given device */
+static int msg_level = 1;
+MODULE_PARM (msg_level, "i");
+MODULE_PARM_DESC (msg_level, "Initial message level (default = 1)");
+
#define mutex_lock(x) down(x)
#define mutex_unlock(x) up(x)
@@ -241,7 +259,9 @@
#endif
#define devinfo(usbnet, fmt, arg...) \
- printk(KERN_INFO "%s: " fmt "\n" , (usbnet)->net.name, ## arg)
+ do { if ((usbnet)->msg_level >= 1) \
+ printk(KERN_INFO "%s: " fmt "\n" , (usbnet)->net.name, ## arg); \
+ } while (0)
#ifdef CONFIG_USB_AN2720
@@ -948,10 +968,11 @@
MK_TTL (NC_READ_TTL_MS, TTL_OTHER (ttl)) );
dbg ("%s: assigned TTL, %d ms", dev->net.name, NC_READ_TTL_MS);
- devdbg (dev, "port %c, peer %sconnected",
- (status & STATUS_PORT_A) ? 'A' : 'B',
- (status & STATUS_CONN_OTHER) ? "" : "dis"
- );
+ if (dev->msg_level >= 2)
+ devinfo (dev, "port %c, peer %sconnected",
+ (status & STATUS_PORT_A) ? 'A' : 'B',
+ (status & STATUS_CONN_OTHER) ? "" : "dis"
+ );
retval = 0;
done:
@@ -1441,10 +1462,11 @@
mutex_lock (&dev->mutex);
netif_stop_queue (net);
- devdbg (dev, "stop stats: rx/tx %ld/%ld, errs %ld/%ld",
- dev->stats.rx_packets, dev->stats.tx_packets,
- dev->stats.rx_errors, dev->stats.tx_errors
- );
+ if (dev->msg_level >= 2)
+ devinfo (dev, "stop stats: rx/tx %ld/%ld, errs %ld/%ld",
+ dev->stats.rx_packets, dev->stats.tx_packets,
+ dev->stats.rx_errors, dev->stats.tx_errors
+ );
// ensure there are no more active urbs
add_wait_queue (&unlink_wakeup, &wait);
@@ -1482,9 +1504,10 @@
// put into "known safe" state
if (info->reset && (retval = info->reset (dev)) < 0) {
- devinfo (dev, "open reset fail (%d) usbnet %03d/%03d, %s",
+ devinfo (dev, "open reset fail (%d) usbnet bus%d%s, %s",
retval,
- dev->udev->bus->busnum, dev->udev->devnum,
+ // FIXME busnum is unstable
+ dev->udev->bus->busnum, dev->udev->devpath,
info->description);
goto done;
}
@@ -1496,14 +1519,16 @@
}
netif_start_queue (net);
- devdbg (dev, "open: enable queueing (rx %d, tx %d) mtu %d %s framing",
- RX_QLEN, TX_QLEN, dev->net.mtu,
- (info->flags & (FLAG_FRAMING_NC | FLAG_FRAMING_GL))
- ? ((info->flags & FLAG_FRAMING_NC)
- ? "NetChip"
- : "GeneSys")
- : "raw"
- );
+ if (dev->msg_level >= 2)
+ devinfo (dev, "open: enable queueing "
+ "(rx %d, tx %d) mtu %d %s framing",
+ RX_QLEN, TX_QLEN, dev->net.mtu,
+ (info->flags & (FLAG_FRAMING_NC | FLAG_FRAMING_GL))
+ ? ((info->flags & FLAG_FRAMING_NC)
+ ? "NetChip"
+ : "GeneSys")
+ : "raw"
+ );
// delay posting reads until we're fully open
tasklet_schedule (&dev->bh);
@@ -1514,6 +1539,80 @@
/*-------------------------------------------------------------------------*/
+static int usbnet_ethtool_ioctl (struct net_device *net, void *useraddr)
+{
+ struct usbnet *dev = (struct usbnet *) net->priv;
+ u32 cmd;
+
+ if (get_user (cmd, (u32 *)useraddr))
+ return -EFAULT;
+ switch (cmd) {
+
+ case ETHTOOL_GDRVINFO: { /* get driver info */
+ struct ethtool_drvinfo info;
+
+ memset (&info, 0, sizeof info);
+ info.cmd = ETHTOOL_GDRVINFO;
+ strncpy (info.driver, driver_name, sizeof info.driver);
+ strncpy (info.version, DRIVER_VERSION, sizeof info.version);
+ strncpy (info.fw_version, dev->driver_info->description,
+ sizeof info.fw_version);
+ snprintf (info.bus_info, sizeof info.bus_info, "USB bus%d%s",
+ /* FIXME busnums are bogus/unstable IDs */
+ dev->udev->bus->busnum, dev->udev->devpath);
+ if (copy_to_user (useraddr, &info, sizeof (info)))
+ return -EFAULT;
+ return 0;
+ }
+
+ case ETHTOOL_GLINK: /* get link status */
+ if (dev->driver_info->check_connect) {
+ struct ethtool_value edata = { ETHTOOL_GLINK };
+
+ edata.data = dev->driver_info->check_connect (dev);
+ if (copy_to_user (useraddr, &edata, sizeof (edata)))
+ return -EFAULT;
+ return 0;
+ }
+ break;
+
+ case ETHTOOL_GMSGLVL: { /* get message-level */
+ struct ethtool_value edata = {ETHTOOL_GMSGLVL};
+
+ edata.data = dev->msg_level;
+ if (copy_to_user (useraddr, &edata, sizeof (edata)))
+ return -EFAULT;
+ return 0;
+ }
+
+ case ETHTOOL_SMSGLVL: { /* set message-level */
+ struct ethtool_value edata;
+
+ if (copy_from_user (&edata, useraddr, sizeof (edata)))
+ return -EFAULT;
+ dev->msg_level = edata.data;
+ return 0;
+ }
+
+ /* could also map RINGPARAM to RX/TX QLEN */
+
+ }
+ /* Note that the ethtool user space code requires EOPNOTSUPP */
+ return -EOPNOTSUPP;
+}
+
+static int usbnet_ioctl (struct net_device *net, struct ifreq *rq, int cmd)
+{
+ switch (cmd) {
+ case SIOCETHTOOL:
+ return usbnet_ethtool_ioctl (net, (void *)rq->ifr_data);
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+/*-------------------------------------------------------------------------*/
+
/* usb_clear_halt cannot be called in interrupt context */
static void
@@ -1576,12 +1675,10 @@
struct nc_trailer *trailer = 0;
#endif /* CONFIG_USB_NET1080 */
- flags = in_interrupt () ? GFP_ATOMIC : GFP_NOIO; /* might be used for nfs */
-
// some devices want funky USB-level framing, for
// win32 driver (usually) and/or hardware quirks
if (info->tx_fixup) {
- skb = info->tx_fixup (dev, skb, flags);
+ skb = info->tx_fixup (dev, skb, GFP_ATOMIC);
if (!skb) {
dbg ("can't tx_fixup skb");
goto drop;
@@ -1750,8 +1847,9 @@
{
struct usbnet *dev = (struct usbnet *) ptr;
- devinfo (dev, "unregister usbnet %03d/%03d, %s",
- udev->bus->busnum, udev->devnum,
+ devinfo (dev, "unregister usbnet bus%d%s, %s",
+ // FIXME busnum is unstable
+ udev->bus->busnum, udev->devpath,
dev->driver_info->description);
unregister_netdev (&dev->net);
@@ -1811,6 +1909,7 @@
usb_inc_dev_use (udev);
dev->udev = udev;
dev->driver_info = info;
+ dev->msg_level = msg_level;
INIT_LIST_HEAD (&dev->dev_list);
skb_queue_head_init (&dev->rxq);
skb_queue_head_init (&dev->txq);
@@ -1836,10 +1935,12 @@
net->stop = usbnet_stop;
net->watchdog_timeo = TX_TIMEOUT_JIFFIES;
net->tx_timeout = usbnet_tx_timeout;
+ net->do_ioctl = usbnet_ioctl;
register_netdev (&dev->net);
- devinfo (dev, "register usbnet %03d/%03d, %s",
- udev->bus->busnum, udev->devnum,
+ devinfo (dev, "register usbnet bus%d%s, %s",
+ // FIXME busnum is unstable
+ udev->bus->busnum, udev->devpath,
dev->driver_info->description);
// ok, it's ready to go.
@@ -1936,7 +2037,7 @@
MODULE_DEVICE_TABLE (usb, products);
static struct usb_driver usbnet_driver = {
- name: "usbnet",
+ name: driver_name,
id_table: products,
probe: usbnet_probe,
disconnect: usbnet_disconnect,
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
Sponsored by http://www.ThinkGeek.com/
