On Sun, Apr 28, Olaf Hering wrote:
> It is a Siemens Celsius mobile H notebook, is the usb controller really
> supported? The bluetooth kbd/trackpad is on hub3 and it does only work
> with uhci, usb-uhci gives me error -84. I wonder if something is really
> wrong because the trackpad does not work.
Btw, this is the usb-uhci output.
I: Found IRQ 5 for device 00:1d.2
PCI: Sharing IRQ 5 with 00:1f.1
PCI: Sharing IRQ 5 with 02:03.0
PCI: Sharing IRQ 5 with 02:04.1
PCI: Sharing IRQ 5 with 02:05.0
PCI: Setting latency timer of device 00:1d.2 to 64
usb-uhci.c: USB UHCI at I/O 0x1880, IRQ 5
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 3
usb.c: kmalloc IF cee08240, numif 1
usb.c: new device strings: Mfr=0, Product=2, SerialNumber=1
usb.c: USB device number 1 default language ID 0x0
Product: USB UHCI Root Hub
SerialNumber: 1880
hub.c: USB hub found
hub.c: 2 ports detected
hub.c: standalone hub
hub.c: ganged power switching
hub.c: global over-current protection
hub.c: Port indicators are not supported
hub.c: power on to power good time: 2ms
hub.c: hub controller current requirement: 0mA
hub.c: port removable status: RR
hub.c: local power source is good
hub.c: no over-current condition exists
hub.c: enabling power on all ports
hub.c: port 1, portstatus 101, change 1, 12 Mb/s
hub.c: port 1 connection change
hub.c: port 1, portstatus 101, change 1, 12 Mb/s
usb.c: hub driver claimed interface cee08240
usb.c: kusbd: /sbin/hotplug add 1
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
hub.c: port 1, portstatus 101, change 0, 12 Mb/s
hub.c: port 1, portstatus 101, change 0, 12 Mb/s
hub.c: port 1, portstatus 101, change 0, 12 Mb/s
hub.c: port 1, portstatus 101, change 0, 12 Mb/s
hub.c: port 1, portstatus 103, change 0, 12 Mb/s
hub.c: USB new device connect on bus3/1, assigned device number 2
usb-uhci.c: interrupt, status 2, frame# 652
usb.c: USB device not responding, giving up (error=-84)
hub.c: port 1, portstatus 103, change 0, 12 Mb/s
hub.c: USB new device connect on bus3/1, assigned device number 3
usb.c: USB device not responding, giving up (error=-84)
hub.c: port 2, portstatus 100, change 0, 12 Mb/s
hub.c: port 1, portstatus 101, change 0, 12 Mb/s
hub.c: port 2, portstatus 100, change 0, 12 Mb/s
Gruss Olaf
--
$ man clone
BUGS
Main feature not yet implemented...
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
