Hello, usb developers and users.
About a week ago i've posted this mail to the linux-usb-users@ mailist,
but people from there can't help. So i hope you will help me.
I have some troubles with iFeel Logitech mouse:
It only lights it's light diode and nothing more
(cat /dev/input/mice keep silence with iFeel).
I've read usb guide from linux-usb.org...
Ather usb optical mouse works fine in those usb port.
Here are some outputs from dmesg, /proc/bus/usb/devices.
All (uhci, full HID input) are compiled into the kernel.
It is old VIA motherboard with "remade" usb port to work
with standart usb plank.
Kerenel version is 2.4.18.
Thanks in advance.
P.S. Please cc me in your answers, since i'm not a subscriber :(
dmesg:
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
uhci.c: USB Universal Host Controller Interface driver v1.1
PCI: Found IRQ 10 for device 00:07.2
uhci.c: USB UHCI at I/O 0xc400, IRQ 10
usb.c: new USB bus registered, assigned bus number 1
uhci.c: detected 2 ports
usb.c: kmalloc IF c156262c, numif 1
usb.c: new device strings: Mfr=0, Product=2, SerialNumber=1
usb.c: USB device number 1 default language ID 0x0
Product: USB UHCI-alt Root Hub
SerialNumber: c400
hub.c: USB hub found
hub.c: 2 ports detected
hub.c: standalone hub
hub.c: ganged power switching
hub.c: global over-current protection
hub.c: Port indicators are not supported
hub.c: power on to power good time: 2ms
hub.c: hub controller current requirement: 0mA
hub.c: port removable status: RR
hub.c: local power source is good
hub.c: no over-current condition exists
hub.c: enabling power on all ports
usb.c: hub driver claimed interface c156262c
usb.c: call_policy add, num 1 -- no FS yet
usb.c: registered new driver usb_mouse
usbmouse.c: v1.6:USB HID Boot Protocol mouse driver
usb.c: registered new driver usblp
printer.c: v0.8:USB Printer Device Class driver
mice: PS/2 mouse device common for all mice
....
uhci.c: root-hub INT complete: port1: 5ab port2: 58a data: 6
hub.c: port 1 connection change
hub.c: port 1, portstatus 301, change 3, 1.5 Mb/s
uhci.c: root-hub INT complete: port1: 5a9 port2: 58a data: 6
uhci.c: root-hub INT complete: port1: 5a5 port2: 58a data: 4
hub.c: port 1, portstatus 303, change 0, 1.5 Mb/s
hub.c: USB new device connect on bus1/1, assigned device number 2
uhci.c: root-hub INT complete: port1: 5a5 port2: 58a data: 4
usb.c: kmalloc IF c15629c4, numif 1
usb.c: skipped 1 class/vendor specific interface descriptors
usb.c: new device strings: Mfr=4, Product=32, SerialNumber=0
usb.c: USB device number 2 default language ID 0x409
Manufacturer: Logitech Inc.
Product: iFeel Mouse
usb.c: unhandled interfaces on device
usb.c: USB device 2 (vend/prod 0x46d/0xc030) is not claimed by any
active driver.
Length = 18
DescriptorType = 01
USB version = 1.00
Vendor:Product = 046d:c030
MaxPacketSize0 = 8
NumConfigurations = 1
Device version = 1.01
Device Class:SubClass:Protocol = 00:00:00
Per-interface classes
Configuration:
bLength = 9
bDescriptorType = 02
wTotalLength = 0029
bNumInterfaces = 01
bConfigurationValue = 01
iConfiguration = 00
bmAttributes = a0
MaxPower = 500mA
Interface: 0
Alternate Setting: 0
bLength = 9
bDescriptorType = 04
bInterfaceNumber = 00
bAlternateSetting = 00
bNumEndpoints = 02
bInterface Class:SubClass:Protocol = 03:01:02
iInterface = 00
Endpoint:
bLength = 7
bDescriptorType = 05
bEndpointAddress = 81 (in)
bmAttributes = 03 (Interrupt)
wMaxPacketSize = 0008
bInterval = 0a
Endpoint:
bLength = 7
bDescriptorType = 05
bEndpointAddress = 01 (out)
bmAttributes = 03 (Interrupt)
wMaxPacketSize = 0008
bInterval = 0a
usb.c: kusbd: /sbin/hotplug add 2
usb.c: kusbd policy returned 0xfffffffe
hub.c: port 2 connection change
hub.c: port 2, portstatus 300, change 3, 1.5 Mb/s
hub.c: port 2 enable change, status 300
....
hub.c: usb_hub_thread exiting
/proc/bus/usb/devices:
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI-alt Root Hub
S: SerialNumber=c400
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=1.5 MxCh= 0
D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=046d ProdID=c030 Rev= 1.01
S: Manufacturer=Logitech Inc.
S: Product=iFeel Mouse
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=03(HID ) Sub=01 Prot=02 Driver=(none)
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl= 10ms
E: Ad=01(O) Atr=03(Int.) MxPS= 8 Ivl= 10ms
Thanks in advance.
--
Evgeniy Polyakov ( s0mbre )
_______________________________________________________________
Have big pipes? SourceForge.net is looking for download mirrors. We supply
the hardware. You get the recognition. Email Us: [EMAIL PROTECTED]
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
