Hi !
Seems to not work but claimed to be usb-storage since on win98 it works as
storage device ...
[root@rezso /]# uname -a
Linux rezso 2.4.18-0.92 #2 Tue May 21 21:01:14 EEST 2002 sparc64 unknown
I have sparc but on intel is the same story as on alpha too ...
cat /proc/scsi/usb-storage-0/1
is empty completly ......
and as remark the modprobe usb-storage command stall on terminal and
cannot be kiled in any form. i think it stall in some module internal loop.
If anybody is happyer with it i can send the initial drivers (2 files) which
at first look easyly can be disasamblet to take a look on his internal
routine.
Any Ideas ?
i search for vendor/prod 0x784/0x1310 of this praktica cam (pentacon)
and foud that in reality is:
Vivicam 3305
i dont think pentacon's guy to improve a really new USB driver
i think is ripped from others .....
Olso i can look inside camera to see chip model if that help.
Inside driver all function called with some "USBLS120" generic
i duno if it help or no.
Thank you !
The debug of dmesg:
usb-ohci.c: USB OHCI at membase 0x1ff00002000, IRQ 10,7d0
usb-ohci.c: usb-02:01.0, OPTi Inc. 82C861
usb.c: new USB bus registered, assigned bus number 1
usb.c: kmalloc IF fffff80015efd1e0, numif 1
usb.c: new device strings: Mfr=0, Product=2, SerialNumber=1
usb.c: USB device number 1 default language ID 0x0
Product: USB OHCI Root Hub
SerialNumber: 2000
hub.c: USB hub found
hub.c: 2 ports detected
hub.c: standalone hub
hub.c: ganged power switching
hub.c: global over-current protection
hub.c: Port indicators are not supported
hub.c: power on to power good time: 2ms
hub.c: hub controller current requirement: 0mA
hub.c: port removable status: RR
hub.c: local power source is good
hub.c: no over-current condition exists
hub.c: enabling power on all ports
usb.c: hub driver claimed interface fffff80015efd1e0
hub.c: port 1, portstatus 101, change 1, 12 Mb/s
hub.c: port 1 connection change
hub.c: port 1, portstatus 101, change 1, 12 Mb/s
hub.c: port 1, portstatus 101, change 0, 12 Mb/s
hub.c: port 1, portstatus 101, change 0, 12 Mb/s
hub.c: port 1, portstatus 101, change 0, 12 Mb/s
hub.c: port 1, portstatus 101, change 0, 12 Mb/s
hub.c: port 1, portstatus 103, change 10, 12 Mb/s
hub.c: USB new device connect on bus1/1, assigned device number 2
usb.c: kmalloc IF fffff80015efd2e0, numif 1
usb.c: new device strings: Mfr=1, Product=2, SerialNumber=3
usb.c: USB device number 2 default language ID 0x409
Manufacturer: USB
Product: DIGITAL CAMERA
SerialNumber: 4810816
usb.c: unhandled interfaces on device
usb.c: USB device 2 (vend/prod 0x784/0x1310) is not claimed by any active
driver.
Length = 18
DescriptorType = 01
USB version = 1.10
Vendor:Product = 0784:1310
MaxPacketSize0 = 64
NumConfigurations = 1
Device version = 0.00
Device Class:SubClass:Protocol = 00:00:00
Per-interface classes
Configuration:
bLength = 9
bDescriptorType = 02
wTotalLength = 0020
bNumInterfaces = 01
bConfigurationValue = 01
iConfiguration = 00
bmAttributes = c0
MaxPower = 0mA
Interface: 0
Alternate Setting: 0
bLength = 9
bDescriptorType = 04
bInterfaceNumber = 00
bAlternateSetting = 00
bNumEndpoints = 02
bInterface Class:SubClass:Protocol = 08:05:50
iInterface = 00
Endpoint:
bLength = 7
bDescriptorType = 05
bEndpointAddress = 81 (in)
bmAttributes = 02 (Bulk)
wMaxPacketSize = 0040
bInterval = 00
Endpoint:
bLength = 7
bDescriptorType = 05
bEndpointAddress = 01 (out)
bmAttributes = 02 (Bulk)
wMaxPacketSize = 0040
bInterval = 00
hub.c: port 2, portstatus 100, change 0, 12 Mb/s
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
scsi1 : SCSI emulation for USB Mass Storage devices
_______________________________________________________________
Don't miss the 2002 Sprint PCS Application Developer's Conference
August 25-28 in Las Vegas -- http://devcon.sprintpcs.com/adp/index.cfm
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
