Hi,
I have a Momobay CX1 ieee1394/USB external HDD. It works fine on
ieee1394 but when I try to use it on USB it does not register properly.
Using RH7.2/7.3 Kernal 2.4.18
/proc/bus/usb/devices
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI Root Hub
S: SerialNumber=d800
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI Root Hub
S: SerialNumber=d400
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=05e3 ProdID=0700 Rev= 1.13
S: Manufacturer=DViCO Inc.
S: Product=MOMOBAY CX-1
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr= 70mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
/proc/scsi/usb-storage-0/0
Host scsi0: usb-storage
Vendor: DViCO Inc.
Product: MOMOBAY CX-1
Serial Number: None
Protocol: Transparent SCSI
Transport: Bulk
GUID: 05e307000000000000000000
Attached: Yes
This thing is supposed to be on /dev/sda but when as root I go "fdisk
-l" it only shows the IDE. However as a user it complains quite rightly
of not being able to open /dev/sda and /dev/hda
Funny thing though looking at a usb reference the Vendor ID looks
incorrect or is clashing?
05e3 Genesys Logic, Inc.
000a Keyboard with PS/2 Port
000b Karna Razor BoomSlang 2000 Mouse
0120 Pacific Image Electronics PrimeFilm 1800u slide/negative scanner
0300 GLUSB98PT Parallel Port
0502 GL620USB GeneLink USB-USB Bridge
0700 SIIG US2256 CompactFlash Card Reader
This compares with:
P: Vendor=05e3 ProdID=0700 Rev= 1.13
S: Manufacturer=DViCO Inc.
S: Product=MOMOBAY CX-1
Is this a problem?
cat /proc/scsi/scsi shows:
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: SIIG Model: CompactFlash Car Rev: 0113
Type: Direct-Access ANSI SCSI revision: 02
Any help would be appreciated.
Thanks
Grahame Jordan
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
