My next two posts will be the updated versions of these patches, syncing to the 2.5.38 code with today's ehci patch applied.
This time, please integrate to Marcelo's tree. - Dave David Brownell wrote: > I'm sending a couple of EHCI related patches out for folk who'd > like to try this on top of 2.4.20-pre7. > > I'd like to see if anyone has any feedback about it before taking > the next steps to get it into 2.4.20 ... there are improvements, > but likely some problems could still stand to get fixed. > > If you're using EHCI hardware, please try the patches. Especially if: > > - You've had problems before; CardBus should work, and there were > a bunch of bugfixes too. > > - You're not using a NEC host controller: Intel (ICH4), VIA > (VT6202, VT8235), SIS (962, 963), NForce2, and so on. If you > have a newish motherboard, it may well have USB 2.0 built in. > > - You want to use USB 1.1 interrupt transactions through USB 2.0 > hubs, such as for many HID devices, some Ethernet adapters, some > disks, and so on. > > The first patch does some minor updates to usbcore, which happens > to break the current 2.4.20-pre7 ehci-hcd code. > > The second patch brings ehci-hcd up to the 2.5.34bk4 level, and > relies on that first patch. > > - Dave > > ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
