[Looks like I forgot to crosspost this to the usb and 1394 lists... -JimC]
In all 2.4 versions I've tested, (the most recent of which are
2.4.20-pre4-ac1 and 2.4.20-pre8), ide-scsi, sbp2 and usb-storage all
use scsi host id 0. Eg (w/ just ide-scsi and sbp2):
:; cat /proc/scsi/scsi=20
Attached devices:=20
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: Maxtor Model: 1394 storage Rev: v1.2
Type: Direct-Access ANSI SCSI revision: 06
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: SONY Model: CD-RW CRX810E Rev: 1.4c
Type: CD-ROM ANSI SCSI revision: 02
This causes problems at lest for sg:
:; cdrecord --scanbus
Cdrecord 1.11a05 (i686-suse-linux) Copyright (C) 1995-2001 J=F6rg Schilling
Linux sg driver version: 3.1.24
Using libscg version 'schily-0.5'
scsibus0:
0,0,0 0) 'Maxtor ' '1394 storage ' 'v1.2' Disk
0,1,0 1) *
0,2,0 2) *
0,3,0 3) *
0,4,0 4) *
0,5,0 5) *
0,6,0 6) *
0,7,0 7) *
I can't test 2.5 on this box, as /home, /opt, /tmp, /usr, /var and
swap are all in LVM1.
What does it take to get the host/channel/id/lun tuples to increment
the host value each time a releted module is inserted?
-JimC
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
