ChangeSet 1.872.3.3, 2002/11/18 17:04:16-08:00, [EMAIL PROTECTED]
[PATCH] usb-storage: change function signatures and cleanup debug msgs
This patch changes the data buffer type from char* to void*, and fixes some
problems with debug prints and comments.
diff -Nru a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c
--- a/drivers/usb/storage/transport.c Wed Nov 20 01:01:16 2002
+++ b/drivers/usb/storage/transport.c Wed Nov 20 01:01:16 2002
@@ -556,7 +556,7 @@
int result;
US_DEBUGP("usb_stor_ctrl_transfer(): rq=%02x rqtype=%02x "
- "value=%04x index=%02x len=%d\n",
+ "value=%04x index=%02x len=%u\n",
request, requesttype, value, index, size);
result = usb_stor_control_msg(us, pipe, request, requesttype,
value, index, data, size);
@@ -596,15 +596,15 @@
* urb status or transfer length.
*/
int usb_stor_bulk_transfer_buf(struct us_data *us, unsigned int pipe,
- char *buf, unsigned int length, unsigned int *act_len)
+ void *buf, unsigned int length, unsigned int *act_len)
{
int result;
- int partial;
+ unsigned int partial;
/* transfer the data */
- US_DEBUGP("usb_stor_bulk_transfer_buf(): xfer %d bytes\n", length);
+ US_DEBUGP("usb_stor_bulk_transfer_buf(): xfer %u bytes\n", length);
result = usb_stor_bulk_msg(us, buf, pipe, length, &partial);
- US_DEBUGP("usb_stor_bulk_msg() returned %d xferred %d/%d\n",
+ US_DEBUGP("usb_stor_bulk_msg() returned %d xferred %u/%u\n",
result, partial, length);
if (act_len)
*act_len = partial;
@@ -612,7 +612,7 @@
/* if we stall, we need to clear it before we go on */
if (result == -EPIPE) {
US_DEBUGP("clearing endpoint halt for pipe 0x%x,"
- " stalled at %d bytes\n", pipe, partial);
+ " stalled at %u bytes\n", pipe, partial);
if (usb_stor_clear_halt(us, pipe) < 0)
return USB_STOR_XFER_ERROR;
return USB_STOR_XFER_STALLED;
@@ -638,7 +638,7 @@
/* no error code, so we must have transferred some data,
* just not all of it */
- US_DEBUGP("-- transferred only %d bytes\n", partial);
+ US_DEBUGP("-- transferred only %u bytes\n", partial);
return USB_STOR_XFER_SHORT;
}
@@ -656,7 +656,7 @@
int partial;
/* initialize the scatter-gather request block */
- US_DEBUGP("usb_stor_bulk_transfer_sglist(): xfer %d bytes, "
+ US_DEBUGP("usb_stor_bulk_transfer_sglist(): xfer %u bytes, "
"%d entries\n", length, num_sg);
result = usb_sg_init(us->current_sg, us->pusb_dev, pipe, 0,
sg, num_sg, length, SLAB_NOIO);
@@ -685,7 +685,7 @@
result = us->current_sg->status;
partial = us->current_sg->bytes;
- US_DEBUGP("usb_sg_wait() returned %d xferred %d/%d\n",
+ US_DEBUGP("usb_sg_wait() returned %d xferred %u/%u\n",
result, partial, length);
if (act_len)
*act_len = partial;
@@ -693,7 +693,7 @@
/* if we stall, we need to clear it before we go on */
if (result == -EPIPE) {
US_DEBUGP("clearing endpoint halt for pipe 0x%x, "
- "stalled at %d bytes\n", pipe, partial);
+ "stalled at %u bytes\n", pipe, partial);
if (usb_stor_clear_halt(us, pipe) < 0)
return USB_STOR_XFER_ERROR;
return USB_STOR_XFER_STALLED;
@@ -719,7 +719,7 @@
/* no error code, so we must have transferred some data,
* just not all of it */
- US_DEBUGP("-- transferred only %d bytes\n", partial);
+ US_DEBUGP("-- transferred only %u bytes\n", partial);
return USB_STOR_XFER_SHORT;
}
@@ -727,13 +727,13 @@
* Transfer an entire SCSI command's worth of data payload over the bulk
* pipe.
*
- * Nore that this uses usb_stor_bulk_transfer_buf() and
+ * Note that this uses usb_stor_bulk_transfer_buf() and
* usb_stor_bulk_transfer_sglist() to achieve its goals --
* this function simply determines whether we're going to use
* scatter-gather or not, and acts appropriately.
*/
int usb_stor_bulk_transfer_sg(struct us_data* us, unsigned int pipe,
- char *buf, unsigned int length_left, int use_sg, int *residual)
+ void *buf, unsigned int length_left, int use_sg, int *residual)
{
int result;
unsigned int partial;
@@ -1278,7 +1278,7 @@
(bcb.Lun >> 4), (bcb.Lun & 0x0F),
le32_to_cpu(bcb.DataTransferLength), bcb.Flags, bcb.Length);
result = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe,
- (char *) &bcb, US_BULK_CB_WRAP_LEN, NULL);
+ &bcb, US_BULK_CB_WRAP_LEN, NULL);
US_DEBUGP("Bulk command transfer result=%d\n", result);
if (result != USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_ERROR;
@@ -1302,7 +1302,7 @@
/* get CSW for device status */
US_DEBUGP("Attempting to get CSW...\n");
result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe,
- (char *) &bcs, US_BULK_CS_WRAP_LEN, NULL);
+ &bcs, US_BULK_CS_WRAP_LEN, NULL);
/* did the attempt to read the CSW fail? */
if (result == USB_STOR_XFER_STALLED) {
@@ -1310,7 +1310,7 @@
/* get the status again */
US_DEBUGP("Attempting to get CSW (2nd try)...\n");
result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe,
- (char *) &bcs, US_BULK_CS_WRAP_LEN, NULL);
+ &bcs, US_BULK_CS_WRAP_LEN, NULL);
}
/* if we still have a failure at this point, we're in trouble */
diff -Nru a/drivers/usb/storage/transport.h b/drivers/usb/storage/transport.h
--- a/drivers/usb/storage/transport.h Wed Nov 20 01:01:16 2002
+++ b/drivers/usb/storage/transport.h Wed Nov 20 01:01:16 2002
@@ -117,6 +117,7 @@
/*
* usb_stor_bulk_transfer_xxx() return codes, in order of severity
*/
+
#define USB_STOR_XFER_GOOD 0 /* good transfer */
#define USB_STOR_XFER_SHORT 1 /* transfered less than expected */
#define USB_STOR_XFER_STALLED 2 /* endpoint stalled */
@@ -129,7 +130,14 @@
#define USB_STOR_TRANSPORT_GOOD 0 /* Transport good, command good */
#define USB_STOR_TRANSPORT_FAILED 1 /* Transport good, command failed */
#define USB_STOR_TRANSPORT_ERROR 2 /* Transport bad (i.e. device dead) */
-#define USB_STOR_TRANSPORT_ABORTED 3 /* Transport aborted */
+
+/*
+ * We used to have USB_STOR_XFER_ABORTED and USB_STOR_TRANSPORT_ABORTED
+ * return codes. But now the transport and low-level transfer routines
+ * treat an abort as just another error (-ENOENT for a cancelled URB).
+ * It is up to the invoke_transport() function to test for aborts and
+ * distinguish them from genuine communication errors.
+ */
/*
* CBI accept device specific command
@@ -162,12 +170,12 @@
u8 request, u8 requesttype, u16 value, u16 index,
void *data, u16 size);
extern int usb_stor_bulk_transfer_buf(struct us_data *us, unsigned int pipe,
- char *buf, unsigned int length, unsigned int *act_len);
+ void *buf, unsigned int length, unsigned int *act_len);
extern int usb_stor_bulk_transfer_sglist(struct us_data *us, unsigned int pipe,
struct scatterlist *sg, int num_sg, unsigned int length,
unsigned int *act_len);
extern int usb_stor_bulk_transfer_sg(struct us_data *us, unsigned int pipe,
- char *buf, unsigned int length, int use_sg, int *residual);
+ void *buf, unsigned int length, int use_sg, int *residual);
static __inline__ int usb_stor_bulk_transfer_srb(struct us_data *us,
unsigned int pipe, Scsi_Cmnd *srb, unsigned int length) {
-------------------------------------------------------
This sf.net email is sponsored by: To learn the basics of securing
your web site with SSL, click here to get a FREE TRIAL of a Thawte
Server Certificate: http://www.gothawte.com/rd524.html
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
