-----Original Message----- From: Nageswari S [mailto:[EMAIL PROTECTED]] Sent: Tuesday, November 26, 2002 4:15 PM To: [EMAIL PROTECTED] Subject: USB Host controller problem
Hi, I have a custom PowerPC board (IBM 405 Based) with USB - OHCI (Ver 1.1)compliant controller on OPB bus. I have taken SA1111 usb driver as a refernce and enabled USB. The root hub got initialised and cat /proc/bus/usb/devices outputs " T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= " B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 " D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxP " P: Vendor=0000 ProdID=0000 Rev= 0.00 " S: Product=USB OHCI Root Hub " S: SerialNumber=ef601200 " C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA " I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 " E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms But, I get following error message when I connect a USB Mouse usb_control/bulk_msg : timeout USB device not accepting the new address. Also, cat /proc/interrupts gets contnious interrupts for usb-ohci.... Could anybody please tell me as to how to write a USB-OHCI host controller driver for a non-pci paltform.... regards, Nageswari ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/ ------------------------------------------------------- This SF.net email is sponsored by: Get the new Palm Tungsten T handheld. Power & Color in a compact size! http://ads.sourceforge.net/cgi-bin/redirect.pl?palm0002en _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
