hey list!
this is supposed to be a *bug* report. I hope it really is
a bug too, looks like one and smells like one. :)
I truly hope that this e-mail came to the right place. if
you're answering, i'd be glad if you keep me in the cc-field
since I'm not subscribed to the list.
[2.] Full description of the problem/report:
as I plug my Saitek Cyborg 3D Rumble Force stick in I recieve
an error msg and all other USB (mice, camera) stops working.
one note, this controller I recieved for product testing
directly from Saitek. so it might differ from the product
found in stores. but this doesn't happend in other OS's.
this also happends if I bootup with the stick plugged in.
I've tried this from 2.4.18 up to 2.4.20. so now when I
still had the problem in 2.4.20 I guess it must be a bug.
[4.] Kernel version:
Linux version 2.4.20 (root@clandestine) (gcc version 2.95.4 20011002
(Debian prerelease)) #1 Fri Nov 29 15:16:34 CET 2002
[7.1.] Software:
Linux clandestine 2.4.20 #1 Fri Nov 29 15:16:34 CET 2002 i686 unknown
unknown GNU/Linux
Gnu C 2.95.4
Gnu make 3.80
util-linux 2.11x
mount 2.11x
modutils 2.4.21
e2fsprogs 1.32
PPP 2.4.1
Linux C Library 2.3.1
Dynamic linker (ldd) 2.3.1
Procps 3.1.0
Net-tools 1.60
Console-tools 0.2.3
Sh-utils 4.5.3
Modules Loaded ppp_deflate zlib_inflate zlib_deflate bsd_comp
snd-seq-midi snd-emu10k1-synth snd-emux-synth snd-seq-midi-emul
snd-seq-virmidi snd-seq-oss snd-seq-midi-event snd-seq snd-pcm-oss
snd-mixer-oss snd-emu10k1 snd-rawmidi snd-pcm snd-timer snd-hwdep
snd-util-mem snd-ac97-codec snd-seq-device snd soundcore ppp_async
nls_cp437 NVdriver
[7.2.] Processor information:
processor : 0
vendor_id : AuthenticAMD
cpu family : 6
model : 6
model name : AMD Athlon(tm) XP 1900+
stepping : 2
cpu MHz : 1599.829
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 mmx
fxsr sse syscall mmxext 3dnowext 3dnow
bogomips : 3191.60
[7.3.] Module information:
ppp_deflate 3000 0 (autoclean)
zlib_inflate 18532 0 (autoclean) [ppp_deflate]
zlib_deflate 17912 0 (autoclean) [ppp_deflate]
bsd_comp 4056 0 (autoclean)
snd-seq-midi 3232 0 (autoclean) (unused)
snd-emu10k1-synth 3996 0 (autoclean) (unused)
snd-emux-synth 24444 0 (autoclean) [snd-emu10k1-synth]
snd-seq-midi-emul 4544 0 (autoclean) [snd-emux-synth]
snd-seq-virmidi 2808 0 (autoclean) [snd-emux-synth]
snd-seq-oss 23520 0 (unused)
snd-seq-midi-event 3208 0 [snd-seq-midi snd-seq-virmidi snd-seq-oss]
snd-seq 38416 2 [snd-seq-midi snd-emux-synth snd-seq-midi-emul
snd-seq-virmidi snd-seq-oss snd-seq-midi-event]
snd-pcm-oss 37380 1
snd-mixer-oss 10744 1 [snd-pcm-oss]
snd-emu10k1 58640 2 [snd-emu10k1-synth]
snd-rawmidi 12704 0 [snd-seq-midi snd-seq-virmidi snd-emu10k1]
snd-pcm 56736 0 [snd-pcm-oss snd-emu10k1]
snd-timer 10760 0 [snd-seq snd-pcm]
snd-hwdep 3648 0 [snd-emu10k1]
snd-util-mem 1360 0 [snd-emux-synth snd-emu10k1]
snd-ac97-codec 25284 0 [snd-emu10k1]
snd-seq-device 3936 0 [snd-seq-midi snd-emu10k1-synth snd-emux-synth
snd-seq-oss snd-seq snd-emu10k1 snd-rawmidi]
snd 25676 0 [snd-seq-midi snd-emux-synth snd-seq-virmidi
snd-seq-oss snd-seq-midi-event snd-seq snd-pcm-oss snd-mixer-oss snd-emu10k1
snd-rawmidi snd-pcm snd-timer snd-hwdep snd-util-mem snd-ac97-codec snd-seq-device]
soundcore 3684 10 [snd]
ppp_async 6624 1 (autoclean)
nls_cp437 4348 4 (autoclean)
NVdriver 1065312 0 (unused)
[7.4.] Loaded driver and hardware information:
ioports:
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
02f8-02ff : serial(set)
0376-0376 : ide1
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial(set)
0cf8-0cff : PCI conf1
1000-1007 : Promise Technology, Inc. 20265
1800-1807 : Promise Technology, Inc. 20265
1800-1807 : ide2
c000-c01f : Creative Labs SB Audigy
c000-c01f : EMU10K1
c400-c407 : Creative Labs SB Audigy MIDI/Game port
cc00-cc03 : Promise Technology, Inc. 20265
cc02-cc02 : ide2
d400-d403 : Promise Technology, Inc. 20265
d800-d83f : Promise Technology, Inc. 20265
d800-d807 : ide2
d808-d80f : ide3
d810-d83f : PDC20265
dc00-dc0f : VIA Technologies, Inc. VT82C586B PIPC Bus Master IDE
dc00-dc07 : ide0
dc08-dc0f : ide1
e000-e01f : VIA Technologies, Inc. USB
e000-e01f : usb-uhci
e400-e41f : VIA Technologies, Inc. USB (#2)
e400-e41f : usb-uhci
e800-e81f : VIA Technologies, Inc. USB (#3)
e800-e81f : usb-uhci
ec00-ecff : VIA Technologies, Inc. VT6102 [Rhine-II]
ec00-ecff : via-rhine
iomem:
00000000-0009ffff : System RAM
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000cc000-000d47ff : Extension ROM
000f0000-000fffff : System ROM
00100000-3ffeffff : System RAM
00100000-002734d4 : Kernel code
002734d5-00310643 : Kernel data
3fff0000-3fff2fff : ACPI Non-volatile Storage
3fff3000-3fffffff : ACPI Tables
e0000000-e3ffffff : VIA Technologies, Inc. VT8367 [KT266]
e4000000-ebffffff : PCI Bus #01
e4000000-e7ffffff : nVidia Corporation NV20 [GeForce3 Ti200]
e8000000-e807ffff : nVidia Corporation NV20 [GeForce3 Ti200]
ec000000-edffffff : PCI Bus #01
ec000000-ecffffff : nVidia Corporation NV20 [GeForce3 Ti200]
ef000000-ef01ffff : Promise Technology, Inc. 20265
ef020000-ef023fff : Creative Labs SB Audigy FireWire Port
ef024000-ef0247ff : Creative Labs SB Audigy FireWire Port
ef025000-ef0250ff : VIA Technologies, Inc. VT6102 [Rhine-II]
ef025000-ef0250ff : via-rhine
ffff0000-ffffffff : reserved
[7.5.] PCI information:
00:00.0 Host bridge: VIA Technologies, Inc. VT8367 [KT266]
Subsystem: VIA Technologies, Inc. VT8367 [KT266]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort+ >SERR- <PERR-
Latency: 0
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=64M]
Capabilities: [a0] AGP version 2.0
Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2,x4
Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:01.0 PCI bridge: VIA Technologies, Inc. VT8367 [KT266 AGP] (prog-if 00 [Normal
decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort+ >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: ec000000-edffffff
Prefetchable memory behind bridge: e4000000-ebffffff
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0b.0 Multimedia audio controller: Creative Labs SB Audigy (rev 03)
Subsystem: Creative Labs SB0090 Augidy Player
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 32 (500ns min, 5000ns max)
Interrupt: pin A routed to IRQ 12
Region 0: I/O ports at c000 [size=32]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0b.1 Input device controller: Creative Labs SB Audigy MIDI/Game port (rev 03)
Subsystem: Creative Labs SB Audigy MIDI/Gameport
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 32
Region 0: I/O ports at c400 [size=8]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0b.2 FireWire (IEEE 1394): Creative Labs SB Audigy FireWire Port (prog-if 10 [OHCI])
Subsystem: Creative Labs: Unknown device 0010
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 32 (500ns min, 1000ns max), cache line size 08
Interrupt: pin B routed to IRQ 11
Region 0: Memory at ef024000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at ef020000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0d.0 RAID bus controller: Promise Technology, Inc. 20265 (rev 02)
Subsystem: Promise Technology, Inc. Ultra100
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 32
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at 1800 [size=8]
Region 1: I/O ports at cc00 [size=4]
Region 2: I/O ports at 1000 [size=8]
Region 3: I/O ports at d400 [size=4]
Region 4: I/O ports at d800 [size=64]
Region 5: Memory at ef000000 (32-bit, non-prefetchable) [size=128K]
Expansion ROM at <unassigned> [disabled] [size=64K]
Capabilities: [58] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:11.0 ISA bridge: VIA Technologies, Inc. VT8233 PCI to ISA Bridge
Subsystem: VIA Technologies, Inc. VT8233 PCI to ISA Bridge
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:11.1 IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 06) (prog-if 8a
[Master SecP PriP])
Subsystem: VIA Technologies, Inc. Bus Master IDE
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 32
Interrupt: pin A routed to IRQ 0
Region 4: I/O ports at dc00 [size=16]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:11.2 USB Controller: VIA Technologies, Inc. USB (rev 1b) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 32, cache line size 08
Interrupt: pin D routed to IRQ 12
Region 4: I/O ports at e000 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:11.3 USB Controller: VIA Technologies, Inc. USB (rev 1b) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 32, cache line size 08
Interrupt: pin D routed to IRQ 12
Region 4: I/O ports at e400 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:11.4 USB Controller: VIA Technologies, Inc. USB (rev 1b) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 32, cache line size 08
Interrupt: pin D routed to IRQ 12
Region 4: I/O ports at e800 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 70)
Subsystem: VIA Technologies, Inc.: Unknown device 0102
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 32 (750ns min, 2000ns max), cache line size 08
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at ec00 [size=256]
Region 1: Memory at ef025000 (32-bit, non-prefetchable) [size=256]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
01:00.0 VGA compatible controller: nVidia Corporation NV20 [GeForce3 Ti200] (rev a3)
(prog-if 00 [VGA])
Subsystem: Asustek Computer, Inc.: Unknown device 4057
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 32 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at ec000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at e4000000 (32-bit, prefetchable) [size=64M]
Region 2: Memory at e8000000 (32-bit, prefetchable) [size=512K]
Expansion ROM at <unassigned> [disabled] [size=64K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [44] AGP version 2.0
Status: RQ=31 SBA- 64bit- FW- Rate=x1,x2,x4
Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
[7.7.] Other information that might be relevant to the problem
usb/devices:
T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI-alt Root Hub
S: SerialNumber=e800
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI-alt Root Hub
S: SerialNumber=e400
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 93/900 us (10%), #Int= 1, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI-alt Root Hub
S: SerialNumber=e000
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=1.5 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=046d ProdID=c012 Rev=13.00
S: Manufacturer=Logitech
S: Product=USB-PS/2 Optical Mouse
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr= 98mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=hid
E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=10ms
[X.] Other notes, patches, fixes, workarounds
sorry, no patches. maybe when I've studied programming
some more! the only work-around I've come up with to this
problem is actually a reboot w/o the device attached.
here's some info from dmesg:
[.snip.]
uhci.c: root-hub INT complete: port1: 48a port2: 48a data: 6
uhci.c: e400: suspend_hc
hub.c: port 1, portstatus 301, change 2, 1.5 Mb/s
uhci.c: root-hub INT complete: port1: 48a port2: 48a data: 6
uhci.c: e800: suspend_hc
hub.c: port 1, portstatus 301, change 2, 1.5 Mb/s
uhci.c: root-hub INT complete: port1: 5a9 port2: 5ab data: 6
hub.c: port 1, portstatus 301, change 2, 1.5 Mb/s
uhci.c: root-hub INT complete: port1: 48a port2: 48a data: 6
hub.c: port 1, portstatus 301, change 2, 1.5 Mb/s
uhci.c: root-hub INT complete: port1: 48a port2: 48a data: 6
hub.c: port 1, portstatus 303, change 0, 1.5 Mb/s
hub.c: new USB device 00:11.2-1, assigned address 2
uhci.c: root-hub INT complete: port1: 5a5 port2: 5ab data: 4
usb.c: kmalloc IF f7e54d00, numif 1
usb.c: skipped 1 class/vendor specific interface descriptors
usb.c: new device strings: Mfr=1, Product=2, SerialNumber=0
usb.c: USB device number 2 default language ID 0x409
Manufacturer: Saitek
Product: Cyborg 3D Rumble Force
uhci.c: root-hub INT complete: port1: 48a port2: 48a data: 6
uhci.c: uhci_result_control() failed with status 500000
[f7e3c0c0] link (37e3c032) element (37b38034)
Depth traverse
Element != First TD
0: [f7b38000] link (37b38034) e3 LS Length=7 MaxLen=7 DT0 EndPt=0 Dev=2,
PID=2d(SETUP) (buf=37e54cc0)
1: [f7b38030] link (37b38064) e3 LS Stalled Babble Length=2 MaxLen=2 DT1 EndPt=0
Dev=2, PID=69(IN) (buf=37e3fe9c)
2: [f7b38060] link (00000001) e3 LS IOC Active Length=0 MaxLen=7ff DT1 EndPt=0
Dev=2, PID=e1(OUT) (buf=00000000)
uhci.c: root-hub INT complete: port1: 48a port2: 48a data: 6
[.snip.]
uhci.c: root-hub INT complete: port1: 48a port2: 48a data: 6
uhci.c: root-hub INT complete: port1: 5a5 port2: 5ab data: 4
uhci.c: root-hub INT complete: port1: 48a port2: 48a data: 6
usb_control/bulk_msg: timeout
input0: USB HID v1.10 Joystick [Saitek Cyborg 3D Rumble Force] on usb1:2.0
usb.c: hid driver claimed interface f7e54d00
usb.c: kusbd: /sbin/hotplug add 2
hub.c: port 2, portstatus 301, change 3, 1.5 Mb/s
hub.c: port 2 connection change
hub.c: port 2, portstatus 301, change 3, 1.5 Mb/s
[.snip.]
usb_control/bulk_msg: timeout
usb.c: USB device not accepting new address=3 (error=-110)
uhci.c: root-hub INT complete: port1: 48a port2: 48a data: 6
[..]
hope I didn't make anything wrong here! if you need any
additional information etc, just e-mail me. have a nice
day and thanks for developing USB-support all!
peace,
orjan.
--
[x] icq - 496723 [x] url - fobie.net
-------------------------------------------------------
This SF.net email is sponsored by: Get the new Palm Tungsten T
handheld. Power & Color in a compact size!
http://ads.sourceforge.net/cgi-bin/redirect.pl?palm0002en
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
