ChangeSet 1.782, 2002/12/05 14:20:22-08:00, [EMAIL PROTECTED]
[PATCH] [PATCH 2.4.20-rc1] scanner.h: add/fix vendor/product ids
This patch against 2.4.20-rc1 adds some vendor/product ids for Mustek
and Lexmark scanners. Also, the names of the existing Mustek scanners
were fixed and the product id of the Bearpaw 1200 F was corrected.
I think that's a rather low-risk patch that can be applied. That's why
I splitted it from the patch that fixes the "two-endpoints-only" issue
and the "can't unload" issue of the scanner driver (posted earlier on
linux-usb-devel).
diff -Nru a/drivers/usb/scanner.h b/drivers/usb/scanner.h
--- a/drivers/usb/scanner.h Thu Dec 5 14:48:43 2002
+++ b/drivers/usb/scanner.h Thu Dec 5 14:48:43 2002
@@ -121,6 +121,8 @@
{ USB_DEVICE(0x03f0, 0x605) }, /* 2200C */
/* iVina */
{ USB_DEVICE(0x0638, 0x0268) }, /* 1200U */
+ /* Lexmark */
+ { USB_DEVICE(0x043d, 0x002d) }, /* X70/X73 */
/* Lifetec */
{ USB_DEVICE(0x05d8, 0x4002) }, /* Lifetec LT9385 */
/* Memorex */
@@ -136,17 +138,25 @@
/* Minolta */
// { USB_DEVICE(0x0638,0x026a) }, /* Minolta Dimage Scan Dual II */
/* Mustek */
- { USB_DEVICE(0x055f, 0x0001) }, /* 1200 CU */
+ { USB_DEVICE(0x055f, 0x0001) }, /* ScanExpress 1200 CU */
{ USB_DEVICE(0x0400, 0x1000) }, /* BearPaw 1200 */
- { USB_DEVICE(0x055f, 0x0002) }, /* 600 CU */
- { USB_DEVICE(0x055f, 0x0873) }, /* 600 USB */
- { USB_DEVICE(0x055f, 0x0003) }, /* 1200 USB */
- { USB_DEVICE(0x055f, 0x0006) }, /* 1200 UB */
+ { USB_DEVICE(0x055f, 0x0002) }, /* ScanExpress 600 CU */
+ { USB_DEVICE(0x055f, 0x0873) }, /* ScanExpress 600 USB */
+ { USB_DEVICE(0x055f, 0x0003) }, /* ScanExpress 1200 USB */
+ { USB_DEVICE(0x055f, 0x0006) }, /* ScanExpress 1200 UB */
+ { USB_DEVICE(0x055f, 0x0007) }, /* ScanExpress 1200 USB Plus */
+ { USB_DEVICE(0x055f, 0x0210) }, /* ScanExpress A3 USB */
{ USB_DEVICE(0x0400, 0x1001) }, /* BearPaw 2400 */
- { USB_DEVICE(0x055f, 0x0008) }, /* 1200 CU Plus */
- { USB_DEVICE(0x0ff5, 0x0010) }, /* BearPaw 1200F */
+ { USB_DEVICE(0x055f, 0x0008) }, /* ScanExpress 1200 CU Plus */
+ { USB_DEVICE(0x055f, 0x0010) }, /* BearPaw 1200F */
{ USB_DEVICE(0x055f, 0x0218) }, /* BearPaw 2400 TA */
- { USB_DEVICE(0x05d8, 0x4002) }, /* 1200 CU and 1200 UB Plus */
+ { USB_DEVICE(0x05d8, 0x4002) }, /* BearPaw 1200 CU and ScanExpress 1200 UB
+Plus */
+ { USB_DEVICE(0x055f, 0x0219) }, /* BearPaw 2400 TA Plus */
+ { USB_DEVICE(0x055f, 0x021c) }, /* BearPaw 1200 CU Plus */
+ { USB_DEVICE(0x055f, 0x021d) }, /* Bearpaw 2400 CU Plus */
+ { USB_DEVICE(0x055f, 0x021e) }, /* BearPaw 1200 TA/CS */
+ { USB_DEVICE(0x055f, 0x0400) }, /* BearPaw 2400 TA PRO */
+ { USB_DEVICE(0x055f, 0x1000) }, /* BearPaw 4800 TA PRO */
/* Plustek */
{ USB_DEVICE(0x07b3, 0x0017) }, /* OpticPro UT12 */
{ USB_DEVICE(0x07b3, 0x0011) }, /* OpticPro UT24 */
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
