ChangeSet 1.897.1.6, 2003/01/08 09:32:25-08:00, [EMAIL PROTECTED]
[PATCH] USB: speedtouch: add GPL notices
speedtouch and friends: add GPL notices (yes, the module was released by Alcatel
under the GPL) and fix some typos.
diff -Nru a/drivers/usb/misc/atmsar.c b/drivers/usb/misc/atmsar.c
--- a/drivers/usb/misc/atmsar.c Wed Jan 8 11:54:02 2003
+++ b/drivers/usb/misc/atmsar.c Wed Jan 8 11:54:02 2003
@@ -1,73 +1,75 @@
+/******************************************************************************
+ * atmsar.c -- General SAR library for ATM devices.
+ *
+ * Copyright (C) 2000, Johan Verrept
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59
+ * Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ ******************************************************************************/
+
/*
- * General SAR library for ATM devices.
- *
- * Written By Johan Verrept ( [EMAIL PROTECTED] )
- *
- * Copyright (c) 2000, Johan Verrept
- *
- * This code falls under the GNU General Public License, see COPYING for details
- *
- * This package is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-
-Version 0.2.4A:
- - Version for inclusion in 2.5 series kernel
- - Modifcations by Richard Purdie ([EMAIL PROTECTED])
- - replaced "sarlib" with "atmsar"
- - adaptations for inclusion in kernel tree
-
-Version 0.2.4:
- - Fixed wrong buffer overrun check in atmsar_decode_rawcell()
- reported by Stephen Robinson <[EMAIL PROTECTED]>
- - Fixed bug when input skb did not contain a multple of 52/53 bytes.
- (would happen when the speedtouch device resynced)
- also reported by Stephen Robinson <[EMAIL PROTECTED]>
-
-Version 0.2.3:
- - Fixed wrong allocation size. caused memory corruption in some
- cases. Reported by Vladimir Dergachev <[EMAIL PROTECTED]>
- - Added some comments
-
-Version 0.2.2:
- - Fixed CRCASM (patch from Linus Flannagan <[EMAIL PROTECTED]>)
- - Fixed problem when user did NOT use the ATMSAR_USE_53BYTE_CELL flag.
- (reported by Piers Scannell <[EMAIL PROTECTED]> )
- - No more in-buffer rewriting for cloned buffers.
- - Removed the PII specific CFLAGS in the Makefile.
-
-Version 0.2.1:
- - removed dependancy on alloc_tx. tis presented problems when using
- this with the br2684 code.
-
-Version 0.2:
- - added AAL0 reassembly
- - added alloc_tx support
- - replaced alloc_skb in decode functions to dev_alloc_skb to allow
- calling from interrupt
- - fixed embarassing AAL5 bug. I was setting the pti bit in the wrong
- byte...
- - fixed another emabrassing bug.. picked up the wrong crc type and
- forgot to invert the crc result...
- - fixed AAL5 length calculations.
- - removed automatic skb freeing from encode functions.
- This caused problems because i did kfree_skb it, while it
- needed to be popped. I cannot determine though whether it
- needs to be popped or not. Figu'e it out ye'self ;-)
- - added mru field. This is the buffersize. atmsar_decode_aal0 will
- use when it allocates a receive buffer. A stop gap for real
- buffer management.
-
-Version 0.1:
- - library created.
- - only contains AAL5, AAL0 can be easily added. ( actually, only
- AAL0 reassembly is missing)
-*/
+ * Written by Johan Verrept ([EMAIL PROTECTED])
+ *
+ * 0.2.4A: - Version for inclusion in 2.5 series kernel
+ * - Modifications by Richard Purdie ([EMAIL PROTECTED])
+ * - replaced "sarlib" with "atmsar"
+ * - adaptations for inclusion in kernel tree
+ *
+ * 0.2.4: - Fixed wrong buffer overrun check in atmsar_decode_rawcell()
+ * reported by Stephen Robinson <[EMAIL PROTECTED]>
+ * - Fixed bug when input skb did not contain a multple of 52/53
+ * bytes (would happen when the speedtouch device resynced)
+ * also reported by Stephen Robinson <[EMAIL PROTECTED]>
+ *
+ * 0.2.3: - Fixed wrong allocation size. caused memory corruption in some
+ * cases. Reported by Vladimir Dergachev <[EMAIL PROTECTED]>
+ * - Added some comments
+ *
+ * 0.2.2: - Fixed CRCASM
+ * patch from Linus Flannagan <[EMAIL PROTECTED]>
+ * - Fixed problem when user did NOT use the
+ * ATMSAR_USE_53BYTE_CELL flag.
+ * reported by Piers Scannell <[EMAIL PROTECTED]>
+ * - No more in-buffer rewriting for cloned buffers.
+ * - Removed the PII specific CFLAGS in the Makefile.
+ *
+ * 0.2.1: - removed dependancy on alloc_tx. tis presented problems when
+ * using this with the br2684 code.
+ *
+ * 0.2: - added AAL0 reassembly
+ * - added alloc_tx support
+ * - replaced alloc_skb in decode functions to dev_alloc_skb to
+ * allow calling from interrupt
+ * - fixed embarassing AAL5 bug. I was setting the pti bit in the
+ * wrong byte...
+ * - fixed another emabrassing bug.. picked up the wrong crc type
+ * and forgot to invert the crc result...
+ * - fixed AAL5 length calculations.
+ * - removed automatic skb freeing from encode functions.
+ * This caused problems because i did kfree_skb it, while it
+ * needed to be popped. I cannot determine though whether it
+ * needs to be popped or not. Figu'e it out ye'self ;-)
+ * - added mru field. This is the buffersize. atmsar_decode_aal0
+ * will use when it allocates a receive buffer. A stop gap for
+ * real buffer management.
+ *
+ * 0.1: - library created.
+ * - only contains AAL5, AAL0 can be easily added. (actually, only
+ * AAL0 reassembly is missing)
+ *
+ */
#include "atmsar.h"
@@ -214,7 +216,7 @@
#define crc32( crc, mem, len) calc_crc(mem, len, crc);
-/* initialiation routines. not used at the moment
+/* initialization routines. not used at the moment
* I will avoid these as long as possible !!
*/
@@ -296,7 +298,7 @@
/*
* This gives problems with the ATM layer alloc_tx().
* It is not usable from interrupt context and for
- * some reason this is used in interurpt context
+ * some reason this is used in interrupt context
* with br2684.c
*
if (vcc->alloc_tx)
@@ -581,7 +583,7 @@
vcc->reasBuffer = dev_alloc_skb (vcc->mtu);
/* if alloc fails, we just drop the cell. it is
possible that we can still
- * receive cells on other vcc's
+ * receive cells on other vcc's
*/
if (vcc->reasBuffer) {
/* if (buffer overrun) discard received cells
until now */
diff -Nru a/drivers/usb/misc/atmsar.h b/drivers/usb/misc/atmsar.h
--- a/drivers/usb/misc/atmsar.h Wed Jan 8 11:54:02 2003
+++ b/drivers/usb/misc/atmsar.h Wed Jan 8 11:54:02 2003
@@ -1,15 +1,26 @@
-/*
+#ifndef _ATMSAR_H_
+#define _ATMSAR_H_
+
+/******************************************************************************
+ * atmsar.h -- General SAR library for ATM devices.
*
- * General SAR library for ATM devices.
+ * Copyright (C) 2000, Johan Verrept
*
- * Copyright (c) 2000, Johan Verrept
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
*
- * This code falls under the GNU General Public License, see COPYING for details.
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
*
- */
-
-#ifndef _ATMSAR_H_
-#define _ATMSAR_H_
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59
+ * Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ ******************************************************************************/
#include <linux/kernel.h>
#include <linux/proc_fs.h>
diff -Nru a/drivers/usb/misc/speedtouch.c b/drivers/usb/misc/speedtouch.c
--- a/drivers/usb/misc/speedtouch.c Wed Jan 8 11:54:02 2003
+++ b/drivers/usb/misc/speedtouch.c Wed Jan 8 11:54:02 2003
@@ -1,31 +1,49 @@
+/******************************************************************************
+ * speedtouch.c -- Alcatel SpeedTouch USB xDSL modem driver.
+ *
+ * Copyright (C) 2001, Alcatel
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59
+ * Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ ******************************************************************************/
+
/*
- * Driver Module for Alcatel SpeedTouch USB xDSL modem
- * Copyright 2001, Alcatel
* Written by Johan Verrept ([EMAIL PROTECTED])
*
-
-1.5A: - Version for inclusion in 2.5 series kernel
- - Modifcations by Richard Purdie ([EMAIL PROTECTED])
- - made compatible with kernel 2.5.6 onwards by changing
- udsl_usb_send_data_context->urb changed to a pointer
- and adding code to alloc and free it
- - remove_wait_queue() added to udsl_atm_processqueue_thread()
-
-1.5: - fixed memory leak when atmsar_decode_aal5 returned NULL.
- (reported by [EMAIL PROTECTED])
-
-1.4: - changed the spin_lock() under interrupt to spin_lock_irqsave()
- - unlink all active send urbs of a vcc that is being closed.
-
-1.3.1: - added the version number
-
-1.3: - Added multiple send urb support
- - fixed memory leak and vcc->tx_inuse starvation bug
- when not enough memory left in vcc.
-
-1.2: - Fixed race condition in udsl_usb_send_data()
-1.1: - Turned off packet debugging
-
+ * 1.5A: - Version for inclusion in 2.5 series kernel
+ * - Modifications by Richard Purdie ([EMAIL PROTECTED])
+ * - made compatible with kernel 2.5.6 onwards by changing
+ * udsl_usb_send_data_context->urb to a pointer and adding code
+ * to alloc and free it
+ * - remove_wait_queue() added to udsl_atm_processqueue_thread()
+ *
+ * 1.5: - fixed memory leak when atmsar_decode_aal5 returned NULL.
+ * (reported by [EMAIL PROTECTED])
+ *
+ * 1.4: - changed the spin_lock() under interrupt to spin_lock_irqsave()
+ * - unlink all active send urbs of a vcc that is being closed.
+ *
+ * 1.3.1: - added the version number
+ *
+ * 1.3: - Added multiple send urb support
+ * - fixed memory leak and vcc->tx_inuse starvation bug
+ * when not enough memory left in vcc.
+ *
+ * 1.2: - Fixed race condition in udsl_usb_send_data()
+ * 1.1: - Turned off packet debugging
+ *
*/
#include <linux/module.h>
@@ -734,7 +752,7 @@
case -ENOENT: /* buffer was unlinked */
case -EILSEQ: /* unplug or timeout */
case -ETIMEDOUT: /* unplug or timeout */
- /*
+ /*
* we don't do anything here and we don't resubmit
*/
return;
@@ -1033,7 +1051,7 @@
#ifdef DEBUG_PACKET
/*******************************************************************************
*
-* Debug
+* Debug
*
*******************************************************************************/
-------------------------------------------------------
This SF.NET email is sponsored by:
SourceForge Enterprise Edition + IBM + LinuxWorld = Something 2 See!
http://www.vasoftware.com
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
