Hi,
is the following code from storage_probe() necessary:
#ifdef CONFIG_USB_STORAGE_SDDR09
if (protocol == US_PR_EUSB_SDDR09 || protocol == US_PR_DPCM_USB) {
/* set the configuration -- STALL is an acceptable response here */
result = usb_set_configuration(dev, 1);
US_DEBUGP("Result from usb_set_configuration is %d\n", result);
if (result == -EPIPE) {
US_DEBUGP("-- stall on control interface\n");
} else if (result != 0) {
/* it's not a stall, but another error -- time to bail */
US_DEBUGP("-- Unknown error. Rejecting device\n");
return -EIO;
}
}
#endif
Can we assume that there are no further interfaces in these devices?
Has this been tested with 2.5?
Regards
Oliver
-------------------------------------------------------
This SF.net email is sponsored by:
The Definitive IT and Networking Event. Be There!
NetWorld+Interop Las Vegas 2003 -- Register today!
http://ads.sourceforge.net/cgi-bin/redirect.pl?keyn0001en
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
