David Brownell <[EMAIL PROTECTED]> writes: > Alexander Hoogerhuis wrote: > > > The USB controller and eth adapter share interrupts, but I make it > > hang equally well by copying stuff from DVDs onto the disk. > > It's also a different system than the one from which > you captured the sysfs files -- that one had a VT6202 > (or maybe VT6212), this one had NEC CardBus EHCI. >
Ick, my bad. It's kinda hard to graft a PCI card onto my laptop :] I'll need to do wome work to gte 2.5.70-mmX onto the stationary, but I'll have a whack at it today. > See if that last patch (with NEC-specific workaround) > makes a difference. > Will do, > > So, it's pretty clear the "load skyrockets" problem comes > from something other than the HCD. As I commented when > it was first reported. > And that on 2.4 the lod actually makes thing go gradually slower untill the machine is unusable, whereas on 2.5 I see the numbers go up, top shows time as being eaten as "I/O Wait" and has little direct ill effect. > - Dave mvh, A -- Alexander Hoogerhuis | [EMAIL PROTECTED] CCNP - CCDP - MCNE - CCSE | +47 908 21 485 "You have zero privacy anyway. Get over it." --Scott McNealy ------------------------------------------------------- This SF.net email is sponsored by: Etnus, makers of TotalView, The best thread debugger on the planet. Designed with thread debugging features you've never dreamed of, try TotalView 6 free at www.etnus.com. _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
