Hi When connecting the usb storage device to USB 2 VIA host controller I get these messages repeated (with address incremented by one) indefinitely:
hub.c: new USB device 00:12.2-1, assigned address 2 usb.c: USB device not accepting new address=2 (error=-71) hub.c: new USB device 00:12.2-1, assigned address 3 usb.c: USB device not accepting new address=3 (error=-71) This is a 440BX box with Celeron 333 CPU. I've used pretty much the same USB hardware (the only difference is the USB 2 PCI board manufacturer - same chip and the platform - it works on my via KT266 Athlon) without these problems. Kernel is 2.4.22-pre6. I've tested 2.4.21 too and got the same results. I've seen the faq and checked that interrupt counts for ehci are incremented. Further details (lspci -vvv, dmesg etc) at http://quark.fsb.hr/vedran/quark/ Thanks Vedran ------------------------------------------------------- This SF.net email is sponsored by: VM Ware With VMware you can run multiple operating systems on a single machine. WITHOUT REBOOTING! Mix Linux / Windows / Novell virtual machines at the same time. Free trial click here: http://www.vmware.com/wl/offer/345/0 _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
