Good morning,

> Do not unload modules before suspend, they should handle that just
> fine.

If I keep them loaded during suspend:

[...]
Suspending devices
uhci-hcd 0000:00:11.2: suspend to state 3
drivers/usb/host/uhci-hcd.c: dc00: suspend_hc
 hwsleep-0257 [10] acpi_enter_sleep_state: Entering sleep state [S3]
Enabling SEP on CPU 0
Back to C!
Devices Resumed
uhci-hcd 0000:00:11.2: resume
[...]
drivers/usb/host/uhci-hcd.c: dc00: wakeup_hc

Mouse doesn't work, unplug:

hub 1-0:0: port 1, status 300, change 3, 1.5 Mb/s
usb 1-1: USB disconnect, address 2
drivers/usb/core/usb.c: nuking urbs assigned to 1-1
usb 1-1: unregistering interfaces
drivers/usb/core/usb.c: nuking urbs assigned to 1-1
usb 1-1: hcd_unlink_urb df7be640 fail -22
usb 1-1: hcd_unlink_urb df7be540 fail -22
drivers/usb/core/usb.c: usb_hotplug
usb 1-1: unregistering device
drivers/usb/core/usb.c: usb_hotplug
hub 1-0:0: port 1 enable change, status 300
drivers/usb/host/uhci-hcd.c: dc00: suspend_hc

replug:

hub 1-0:0: port 1, status 301, change 3, 1.5 Mb/s
hub 1-0:0: debounce: port 1: delay 100ms stable 4 status 0x301
hub 1-0:0: new USB device on port 1, assigned address 3
drivers/usb/core/message.c: usb_control/bulk_msg: timeout

Further attempts to un/re-plug the device show no response.

(Same with Canon Powershot instead of Logitech USB Mouse)

> With uhci on toshiba satelite I can do both S3 and S4, and USB
> survives that (at least it is able to power devices and detects
> plugs/unplugs).

In my case it is an Epox 8kha+ board, the problem should not be hardware specific 
since Suspend To RAM works under WinXP.

I will try S4 lateron.

-Dominik Brugger


-------------------------------------------------------
This SF.Net email sponsored by: Free pre-built ASP.NET sites including
Data Reports, E-commerce, Portals, and Forums are available now.
Download today and enter to win an XBOX or Visual Studio .NET.
http://aspnet.click-url.com/go/psa00100003ave/direct;at.aspnet_072303_01/01
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel

Reply via email to