here is the output from lsusb... Bus 004 Device 001: ID 0000:0000 Virtual Hub Bus 003 Device 001: ID 0000:0000 Virtual Hub Bus 002 Device 002: ID 0bb2:6098 Bus 002 Device 001: ID 0000:0000 Virtual Hub Bus 001 Device 001: ID 0000:0000 Virtual Hub
and from /proc/bus/usb/devices... T: Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 2.06 S: Manufacturer=Linux 2.6.0-test3-mm2 uhci-hcd S: Product=UHCI Host Controller S: SerialNumber=0000:00:10.2 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 2.06 S: Manufacturer=Linux 2.6.0-test3-mm2 uhci-hcd S: Product=UHCI Host Controller S: SerialNumber=0000:00:10.1 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 2.06 S: Manufacturer=Linux 2.6.0-test3-mm2 uhci-hcd S: Product=UHCI Host Controller S: SerialNumber=0000:00:10.0 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=02(comm.) Sub=00 Prot=00 MxPS=32 #Cfgs= 1 P: Vendor=0bb2 ProdID=6098 Rev= 1.01 S: Manufacturer=Ambit USB S: Product=Ambit USB Cable Modem S: SerialNumber=00D059F1412B C:* #Ifs= 2 Cfg#= 1 Atr=c0 MxPwr= 0mA I: If#= 1 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=(none) E: Ad=83(I) Atr=03(Int.) MxPS= 32 Ivl=64ms I: If#= 0 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=(none) E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 6 B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 2.06 S: Manufacturer=Linux 2.6.0-test3-mm2 ehci_hcd S: Product=EHCI Host Controller S: SerialNumber=0000:00:10.3 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=256ms ----- Original Message ----- From: "David Brownell" <[EMAIL PROTECTED]> To: "Lee Hancock" <[EMAIL PROTECTED]> Cc: <[EMAIL PROTECTED]> Sent: Friday, August 15, 2003 12:08 AM Subject: Re: [linux-usb-devel] Usb Cable modem ntl:home 100 (Ambit) is not recognized by 2.6.0-test3 > Lee Hancock wrote: > > My Usb Cable modem ntl:home 100 (Ambit) has been working flawlessly with > > the cdc-ether driver, but since the conversion to usbnet driver I have been > > unable to get it working. Upon boot up I get this error message. "USB 2-1: > > bad CDC descriptors". ... > > > > cat /proc/bus/usb/devices > > No such file. > > Then "mount -t usbfs usb /proc/bus/usb" and forward "lsusb" output. > > Since the descriptors are the problem, we need to see them before > we can figure out what's wrong. The /proc/bus/usb/devices output > won't help, since they only include the standard descriptors not > the class-specific ones. > > - Dave > > > > ------------------------------------------------------- This SF.Net email sponsored by: Free pre-built ASP.NET sites including Data Reports, E-commerce, Portals, and Forums are available now. Download today and enter to win an XBOX or Visual Studio .NET. http://aspnet.click-url.com/go/psa00100003ave/direct;at.aspnet_072303_01/01 _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
