Hi,
The following 3 patches are the backports from those already applied to 2.6.
Added vendor/product ids for Canon, HP, Microtek, Mustek, Siemens,
UMAX, and Visioneer scanners.
Bye,
Henning
diff -u -r linux-2.4.23-pre6/drivers/usb/scanner.c
linux-2.4.23-pre6.newids9/drivers/usb/scanner.c
--- linux-2.4.23-pre6/drivers/usb/scanner.c 2003-10-03 11:56:13.000000000 +0200
+++ linux-2.4.23-pre6.newids9/drivers/usb/scanner.c 2003-10-03 12:07:25.000000000
+0200
@@ -378,6 +378,11 @@
* Sergey Vlasov.
* - Clean up irq urb when not enough memory is available (Sergey Vlasov).
*
+ * 0.4.15 2003-10-03
+ * - Added vendor/product ids for Canon, HP, Microtek, Mustek, Siemens, UMAX, and
+ * Visioneer scanners.
+ *
+ *
* TODO
* - Performance
* - Select/poll methods
diff -u -r linux-2.4.23-pre6/drivers/usb/scanner.h
linux-2.4.23-pre6.newids9/drivers/usb/scanner.h
--- linux-2.4.23-pre6/drivers/usb/scanner.h 2003-10-03 11:56:13.000000000 +0200
+++ linux-2.4.23-pre6.newids9/drivers/usb/scanner.h 2003-10-03 12:04:14.000000000
+0200
@@ -44,7 +44,7 @@
// #define DEBUG
-#define DRIVER_VERSION "0.4.14"
+#define DRIVER_VERSION "0.4.15"
#define DRIVER_DESC "USB Scanner Driver"
#include <linux/usb.h>
@@ -123,7 +123,10 @@
{ USB_DEVICE(0x04a9, 0x220d) }, /* CanoScan N670U/N676U/LIDE 20 */
{ USB_DEVICE(0x04a9, 0x220e) }, /* CanoScan N1240U/LIDE 30 */
{ USB_DEVICE(0x04a9, 0x220f) }, /* CanoScan 8000F */
+ { USB_DEVICE(0x04a9, 0x2210) }, /* CanoScan 9900F */
+ { USB_DEVICE(0x04a9, 0x2212) }, /* CanoScan 5000F */
{ USB_DEVICE(0x04a9, 0x2213) }, /* LIDE 50 */
+ { USB_DEVICE(0x04a9, 0x2215) }, /* CanoScan 3000 */
{ USB_DEVICE(0x04a9, 0x3042) }, /* FS4000US */
/* Colorado -- See Primax/Colorado below */
/* Compaq */
@@ -159,7 +162,9 @@
// { USB_DEVICE(0x03f0, 0x0701) }, /* ScanJet 5300C - NOT SUPPORTED - use
hpusbscsi driver */
{ USB_DEVICE(0x03f0, 0x0705) }, /* ScanJet 4400C */
// { USB_DEVICE(0x03f0, 0x0801) }, /* ScanJet 7400C - NOT SUPPORTED - use
hpusbscsi driver */
+ { USB_DEVICE(0x03f0, 0x0805) }, /* ScanJet 4470c */
{ USB_DEVICE(0x03f0, 0x0901) }, /* ScanJet 2300C */
+ { USB_DEVICE(0x03f0, 0x0a01) }, /* ScanJet 2400c */
{ USB_DEVICE(0x03F0, 0x1005) }, /* ScanJet 5400C */
{ USB_DEVICE(0x03F0, 0x1105) }, /* ScanJet 5470C */
{ USB_DEVICE(0x03f0, 0x1205) }, /* ScanJet 5550C */
@@ -178,9 +183,11 @@
/* Memorex */
{ USB_DEVICE(0x0461, 0x0346) }, /* 6136u - repackaged Primax ? */
/* Microtek */
+ { USB_DEVICE(0x05da, 0x20a7) }, /* ScanMaker 5600 */
{ USB_DEVICE(0x05da, 0x20c9) }, /* ScanMaker 6700 */
{ USB_DEVICE(0x05da, 0x30ce) }, /* ScanMaker 3800 */
{ USB_DEVICE(0x05da, 0x30cf) }, /* ScanMaker 4800 */
+ { USB_DEVICE(0x05da, 0x30d4) }, /* ScanMaker 3830 + 3840 */
{ USB_DEVICE(0x04a7, 0x0224) }, /* Scanport 3000 (actually Visioneer?)*/
/* The following SCSI-over-USB Microtek devices are supported by the
microtek driver: Enable SCSI and USB Microtek in kernel config */
@@ -215,6 +222,7 @@
{ USB_DEVICE(0x055f, 0x021e) }, /* BearPaw 1200 TA/CS */
{ USB_DEVICE(0x055f, 0x0400) }, /* BearPaw 2400 TA PRO */
{ USB_DEVICE(0x055f, 0x0401) }, /* P 3600 A3 Pro */
+ { USB_DEVICE(0x055f, 0x0409) }, /* BearPaw 2448TA Pro */
{ USB_DEVICE(0x055f, 0x0873) }, /* ScanExpress 600 USB */
{ USB_DEVICE(0x055f, 0x1000) }, /* BearPaw 4800 TA PRO */
// { USB_DEVICE(0x05d8, 0x4002) }, /* BearPaw 1200 CU and ScanExpress
1200 UB Plus (see Artec) */
@@ -280,6 +288,9 @@
{ USB_DEVICE(0x04b8, 0x011e) }, /* Perfection 1660 Photo */
{ USB_DEVICE(0x04b8, 0x0801) }, /* Stylus CX5200 */
{ USB_DEVICE(0x04b8, 0x0802) }, /* Stylus CX3200 */
+ /* Siemens */
+ { USB_DEVICE(0x0681, 0x0005) }, /* ID Mouse Professional */
+ { USB_DEVICE(0x0681, 0x0010) }, /* Cherry FingerTIP ID Board - Sensor */
/* SYSCAN */
{ USB_DEVICE(0x0a82, 0x4600) }, /* TravelScan 460/464 */
/* Trust */
@@ -290,6 +301,7 @@
{ USB_DEVICE(0x1606, 0x0010) }, /* Astra 1220U */
{ USB_DEVICE(0x1606, 0x0030) }, /* Astra 2000U */
{ USB_DEVICE(0x1606, 0x0060) }, /* Astra 3400U/3450U */
+ { USB_DEVICE(0x1606, 0x0070) }, /* Astra 4400 */
{ USB_DEVICE(0x1606, 0x0130) }, /* Astra 2100U */
{ USB_DEVICE(0x1606, 0x0160) }, /* Astra 5400U */
{ USB_DEVICE(0x1606, 0x0230) }, /* Astra 2200U */
@@ -297,7 +309,8 @@
{ USB_DEVICE(0x04a7, 0x0211) }, /* OneTouch 7600 USB */
{ USB_DEVICE(0x04a7, 0x0221) }, /* OneTouch 5300 USB */
{ USB_DEVICE(0x04a7, 0x0224) }, /* OneTouch 4800 USB */
- { USB_DEVICE(0x04a7, 0x0226) }, /* OneTouch 5300 USB */
+ { USB_DEVICE(0x04a7, 0x0226) }, /* OneTouch 5800 USB */
+ { USB_DEVICE(0x04a7, 0x022c) }, /* OneTouch 9020 USB */
{ USB_DEVICE(0x04a7, 0x0231) }, /* 6100 USB */
{ USB_DEVICE(0x04a7, 0x0311) }, /* 6200 EPP/USB */
{ USB_DEVICE(0x04a7, 0x0321) }, /* OneTouch 8100 EPP/USB */
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
