You can add your multicard reader manually and leave that option off. On Sat, 11 Oct 2003, Willy Gardiol wrote:
> -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > > This is the point: > i have an usb floppy driver and a multi-card flash reader/writer. > > The floppy does not work with "probe for all luns" enabled > But i cannot access any port except the first one on my multi-card device if i > do not enable "probe for all luns", and i need them, expecially one of them > which is not the first. > > With "probe for all luns" enabled the floppy give me this output: > hub.c: new USB device 00:04.2-1.1, assigned address 7 > scsi3 : SCSI emulation for USB Mass Storage devices > Vendor: SMSC Model: USB FDC Rev: 2.10 > Type: Direct-Access ANSI SCSI revision: 02 > Vendor: SMSC Model: USB FDC Rev: 2.10 > Type: Direct-Access ANSI SCSI revision: 02 > Vendor: SMSC Model: USB FDC Rev: 2.10 > Type: Direct-Access ANSI SCSI revision: 02 > Vendor: SMSC Model: USB FDC Rev: 2.10 > Type: Direct-Access ANSI SCSI revision: 02 > Vendor: SMSC Model: USB FDC Rev: 2.10 > Type: Direct-Access ANSI SCSI revision: 02 > Vendor: SMSC Model: USB FDC Rev: 2.10 > Type: Direct-Access ANSI SCSI revision: 02 > Vendor: SMSC Model: USB FDC Rev: 2.10 > Type: Direct-Access ANSI SCSI revision: 02 > Vendor: SMSC Model: USB FDC Rev: 2.10 > Type: Direct-Access ANSI SCSI revision: 02 > Attached scsi removable disk sde at scsi3, channel 0, id 0, lun 0 > Attached scsi removable disk sdf at scsi3, channel 0, id 0, lun 1 > Attached scsi removable disk sdg at scsi3, channel 0, id 0, lun 2 > Attached scsi removable disk sdh at scsi3, channel 0, id 0, lun 3 > Attached scsi removable disk sdi at scsi3, channel 0, id 0, lun 4 > Attached scsi removable disk sdj at scsi3, channel 0, id 0, lun 5 > Attached scsi removable disk sdk at scsi3, channel 0, id 0, lun 6 > Attached scsi removable disk sdl at scsi3, channel 0, id 0, lun 7 > SCSI device sde: 2880 512-byte hdwr sectors (1 MB) > sde: Write Protect is off > sde: sde1 sde2 sde3 sde4 > SCSI device sdf: 2880 512-byte hdwr sectors (1 MB) > sdf: Write Protect is off > sdf: sdf1 sdf2 sdf3 sdf4 > SCSI device sdg: 2880 512-byte hdwr sectors (1 MB) > sdg: Write Protect is off > sdg: sdg1 sdg2 sdg3 sdg4 > SCSI device sdh: 2880 512-byte hdwr sectors (1 MB) > sdh: Write Protect is off > sdh: sdh1 sdh2 sdh3 sdh4 > SCSI device sdi: 2880 512-byte hdwr sectors (1 MB) > sdi: Write Protect is off > sdi: sdi1 sdi2 sdi3 sdi4 > SCSI device sdj: 2880 512-byte hdwr sectors (1 MB) > sdj: Write Protect is off > sdj: sdj1 sdj2 sdj3 sdj4 > SCSI device sdk: 2880 512-byte hdwr sectors (1 MB) > sdk: Write Protect is off > sdk: sdk1 sdk2 sdk3 sdk4 > SCSI device sdl: 2880 512-byte hdwr sectors (1 MB) > sdl: Write Protect is off > sdl: sdl1 sdl2 sdl3 sdl4 > WARNING: USB Mass Storage data integrity not assured > > ... and with sg_map i get: > the reader: > /dev/sg2 /dev/sda > /dev/sg3 /dev/sdb > /dev/sg4 /dev/sdc > /dev/sg5 /dev/sdd > all the following are the floppy! > /dev/sg6 /dev/sde > /dev/sg7 /dev/sdf > /dev/sg8 /dev/sdg > /dev/sg9 /dev/sdh > /dev/sg10 /dev/sdi > /dev/sg11 /dev/sdj > /dev/sg12 /dev/sdk > /dev/sg13 /dev/sdl > > but none from sde to sdl mounts! > > Please give me some hints! > > bye > > - -- > > ! > Willy Gardiol - [EMAIL PROTECTED] > gardiol.eu.org > Use linux for your freedom. > > Forse una storia d'amore � proprio > questo: non un contratto tra parti > uguali, ma un'esplosione di sogni > e desideri che non trovano sfogo > nella vita quotidiana. > > Janette Winterson, Passioni. > > -----BEGIN PGP SIGNATURE----- > Version: GnuPG v1.2.1 (GNU/Linux) > > iD8DBQE/iEVpQ9qolN/zUk4RAqeYAKCDrXFDTnAqnfZjGN4nkkqqG3h+ogCgp0H1 > dhViWZ0SXBWJjfx+GpWj/vU= > =EJQW > -----END PGP SIGNATURE----- > > > > ------------------------------------------------------- > This SF.net email is sponsored by: SF.net Giveback Program. > SourceForge.net hosts over 70,000 Open Source Projects. > See the people who have HELPED US provide better services: > Click here: http://sourceforge.net/supporters.php > _______________________________________________ > [EMAIL PROTECTED] > To unsubscribe, use the last form field at: > https://lists.sourceforge.net/lists/listinfo/linux-usb-devel > -- /------------------------------------+-------------------------\ |Stephen J. Gowdy | SLAC, MailStop 34, | |http://www.slac.stanford.edu/~gowdy/ | 2575 Sand Hill Road, | |http://calendar.yahoo.com/gowdy | Menlo Park CA 94025, USA | |EMail: [EMAIL PROTECTED] | Tel: +1 650 926 3144 | \------------------------------------+-------------------------/ ------------------------------------------------------- This SF.net email is sponsored by: SF.net Giveback Program. SourceForge.net hosts over 70,000 Open Source Projects. See the people who have HELPED US provide better services: Click here: http://sourceforge.net/supporters.php _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
