On Wed, 15 Oct 2003, Sergio Tagliapietra wrote: > |Unless this copy of /proc/bus/usb/devices was truncated -- it > |looks like it might be. If there were no configurations stored, it's > |hard to see how the device could have worked under 2.4.20. > > This is the full /proc/bus/usb/devices. > The device works without any problems under 2.4.21/wlan-ng-0.2.1pre13... > and i used it months ago even with an older 2.4.x kernel version. <snip> > T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 > D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 > P: Vendor=09aa ProdID=3642 Rev= 1.32 > S: SerialNumber=01190006 > C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=500mA > I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) > E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms > E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms > E: Ad=83(I) Atr=03(Int.) MxPS= 8 Ivl=1ms
This is the part that refers to the device in question. It also reports one interface, numbered 1. The reason it works with the earlier software is that the code did not check for invalid numbering. Alan Stern ------------------------------------------------------- This SF.net email is sponsored by: SF.net Giveback Program. SourceForge.net hosts over 70,000 Open Source Projects. See the people who have HELPED US provide better services: Click here: http://sourceforge.net/supporters.php _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
