ChangeSet 1.1346, 2003/10/23 22:07:41-07:00, [EMAIL PROTECTED]
[PATCH] USB: usb enumeration clears full speed ep0 state
This resolves a bug that was recently reported to me by someone
enumerating a USB 1.1 modem through a high speed hub. I'm a bit
surprised we never saw it before; I think cache/dma timings must
usually be strongly in our favor.
The problem was that the HC was still using the old ep0 maxpacket
value, so when it received an 18 byte device descriptor it would
report a packet overrun and enumeration would fail. The fix is
straightforward: invalidate the HC's old endpoint state when we
change the full speed maxpacket size. (And eventually, we can
remove EHCI and OHCI code coping with usbcore not doing this.)
drivers/usb/core/usb.c | 3 +++
1 files changed, 3 insertions(+)
diff -Nru a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c
--- a/drivers/usb/core/usb.c Thu Oct 23 23:03:55 2003
+++ b/drivers/usb/core/usb.c Thu Oct 23 23:03:55 2003
@@ -1063,6 +1063,9 @@
goto fail;
}
if (dev->speed == USB_SPEED_FULL) {
+ usb_disable_endpoint(dev, 0);
+ usb_endpoint_running(dev, 0, 1);
+ usb_endpoint_running(dev, 0, 0);
dev->epmaxpacketin [0] = dev->descriptor.bMaxPacketSize0;
dev->epmaxpacketout[0] = dev->descriptor.bMaxPacketSize0;
}
-------------------------------------------------------
This SF.net email is sponsored by: The SF.net Donation Program.
Do you like what SourceForge.net is doing for the Open
Source Community? Make a contribution, and help us add new
features and functionality. Click here: http://sourceforge.net/donate/
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
