$ dmesg
...
sda: Write Protect is off
/dev/scsi/host0/bus0/target0/lun0:<7>usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Command READ_10 (10 bytes)
usb-storage: 28 00 00 00 00 00 00 00 08 00 00 00
usb-storage: Bulk command S 0x43425355 T 0x5 Trg 0 LUN 0 L 4096 F 128 CL 10
usb-storage: Bulk command transfer result=0
usb-storage: usb_stor_transfer_partial(): xfer 4096 bytes
usb-storage: usb_stor_bulk_msg() returned -71 xferred 512/4096
usb-storage: usb_stor_transfer_partial(): unknown error
usb-storage: Bulk data transfer result 0x2
usb-storage: Attempting to get CSW...
usb-storage: Bulk status result = -71
usb-storage: -- transport indicates error, resetting
usb-storage: Bulk reset requested
cryptoapi: loaded
cryptoloop: loaded
cryptoapi: Registered serpent-ecb (0)
cryptoapi: Registered serpent-cbc (65536)
cryptoapi: Registered serpent-cfb (131072)
cryptoapi: Registered serpent-ctr (262144)
cryptoapi: Registered serpent-rtc (524288)
cryptoapi: Registered aes-ecb (0)
cryptoapi: Registered aes-cbc (65536)
cryptoapi: Registered aes-cfb (131072)
cryptoapi: Registered aes-ctr (262144)
cryptoapi: Registered aes-rtc (524288)
usb_control/bulk_msg: timeout
usb-storage: Bulk soft reset failed -110
usb-storage: scsi cmd done, result=0x70000
usb-storage: *** thread sleeping.
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Command READ_10 (10 bytes)
usb-storage: 28 00 00 00 00 00 00 00 08 00 00 00
usb-storage: Bulk command S 0x43425355 T 0x6 Trg 0 LUN 0 L 4096 F 128 CL 10
usb-storage: command_abort() called
usb-storage: Bulk command transfer result=-104
usb-storage: -- transport indicates command was aborted
usb-storage: Bulk reset requested
usb_control/bulk_msg: timeout
usb-storage: Bulk soft reset failed -110
usb-storage: scsi command aborted
usb-storage: *** thread sleeping.
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Command TEST_UNIT_READY (6 bytes)
usb-storage: 00 00 00 00 00 00 00 00 08 00 00 00
usb-storage: Bulk command S 0x43425355 T 0x7 Trg 0 LUN 0 L 0 F 0 CL 6
usb-storage: command_abort() called
usb-storage: Bulk command transfer result=-104
usb-storage: -- transport indicates command was aborted
usb-storage: Bulk reset requested
usb_control/bulk_msg: timeout
usb-storage: Bulk soft reset failed -110
usb-storage: scsi command aborted
usb-storage: *** thread sleeping.
usb-storage: device_reset() called
usb-storage: Bulk reset requested
usb_control/bulk_msg: timeout
usb-storage: Bulk soft reset failed -110
usb-storage: bus_reset() called
usb-storage: host_reset() requested but not implemented
scsi: device set offline - command error recover failed: host 0 channel 0 id 0
lun 0
SCSI disk error : host 0 channel 0 id 0 lun 0 return code = 6050000
I/O error: dev 08:00, sector 0
I/O error: dev 08:00, sector 2
I/O error: dev 08:00, sector 0
unable to read partition table
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 2
usb.c: usb-storage driver claimed interface dfdbef40
usb.c: kusbd: /sbin/hotplug add 2
hub.c: port 3, portstatus 100, change 0, 12 Mb/s
$ cat /proc/bus/usb/devices
<not exists>
Thanks in advance,
Laci
p.s.: Please CC: me, I'm not on the list.
-------------------------------------------------
This mail sent through IMP: http://horde.org/imp/
-------------------------------------------------------
This SF. Net email is sponsored by: GoToMyPC
GoToMyPC is the fast, easy and secure way to access your computer from
any Web browser or wireless device. Click here to Try it Free!
https://www.gotomypc.com/tr/OSDN/AW/Q4_2003/t/g22lp?Target=mm/g22lp.tmpl
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
