On Mon, 24 Nov 2003, Kleiner Hampel wrote: > Am Mon, den 24.11.2003 schrieb Alan Stern um 17:12: > > > > You can try configuring your kernel with usb-storage debugging turned on. > > Post the debugging log messages you get when you plug in your drive. (My > > guess is that this will turn out to be a problem for which a fix has just > > recently been accepted, but it won't appear until after 2.6.0-final.) > > Here is my dmesg output: > > Initializing USB Mass Storage driver... > drivers/usb/core/usb.c: registered new driver usb-storage > USB Mass Storage support registered. > hub 5-0:1.0: new USB device on port 1, assigned address 2 > scsi0 : SCSI emulation for USB Mass Storage devices > Vendor: ST360015 Model: A Rev: 0811 > Type: Direct-Access ANSI SCSI revision: 02 > SCSI device sda: 117231408 512-byte hdwr sectors (60022 MB) > sda: assuming drive cache: write through > sda: sda1 > Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 > WARNING: USB Mass Storage data integrity not assured > USB Mass Storage device found at 2
You didn't turn on usb-storage debugging in your kernel configuration. Alan Stern ------------------------------------------------------- This SF.net email is sponsored by: SF.net Giveback Program. Does SourceForge.net help you be more productive? Does it help you create better code? SHARE THE LOVE, and help us help YOU! Click Here: http://sourceforge.net/donate/ _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
