On Mon, 1 Dec 2003 11:50:32 -0800 Aaron Lehmann wrote: > I have a HP LaserJet 1300 that I'm using over USB. > > (drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 8 if 0 alt 1 proto > 2 vid 0x03F0 pid 0x1017) > > What's getting to be very annoying is that usually within a day after > printing something, I get the message usb 1-2: control timeout on > ep0in, and the printer needs to be power cycled. I get other weird > errors sometimes, like "drivers/usb/class/usblp.c: usblp0: error -110 > reading printer status". I don't have any evidence that this is > Linux's fault, but it seems like a fairly likely possibility, at least > if you consider it an incompatibility with the printer rather than a bug. > My mouse uses USB and it works fine. I'm using an expensive Belkin > USB cable. The kernel version is 2.6.0-test9-bk17. Here is some > information on my USB controller: > > 00:11.2 USB Controller: VIA Technologies, Inc. USB (rev 23) (prog-if 00 [UHCI]) > Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller > Flags: bus master, medium devsel, latency 32, IRQ 10 > I/O ports at c800 [size=32] > Capabilities: <available only to root> > > I think this may have started a few -test revisions ago, but I'm not > sure. I only purchased the printer fairly recently so it's not like I > can say that it's worked for years.
I have experienced similar issues with LaserJet 1300: http://marc.theaimsgroup.com/?l=linux-usb-devel&m=106208938406301&w=2 http://marc.theaimsgroup.com/?w=2&r=1&s=laserjet+1300+lockup&q=t ------------------------------------------------------- This SF.net email is sponsored by: SF.net Giveback Program. Does SourceForge.net help you be more productive? Does it help you create better code? SHARE THE LOVE, and help us help YOU! Click Here: http://sourceforge.net/donate/ _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
