1. Problem: Kernel 2.4.23 fails to talk to device via the usb-uhci module
2 I have a USB camera (Labtec web cam) which worked under kernel 2.4.22,
but is not recognized at all by the usb system when plugged in under
2.4.23.
3 modules usb
4. Linux version 2.4.23 ([EMAIL PROTECTED]) (gcc version 2.95.4 20011002
(Debian prerelease)) #2 Wed Dec 10 18:53:53 PST 2003
5. Dec 11 00:27:34 mushworld kernel: hub.c: port 1, portstatus 303, change
0, 1.5 M
b/s
Dec 11 00:27:34 mushworld kernel: hub.c: port 2, portstatus 100, change 0, 12 Mb
/s
Dec 11 00:27:34 mushworld kernel: hub.c: port 3, portstatus 101, change 1, 12 Mb
/s
Dec 11 00:27:34 mushworld kernel: hub.c: port 3 connection change
Dec 11 00:27:34 mushworld kernel: hub.c: port 3, portstatus 101, change 1, 12 Mb
/s
Dec 11 00:27:34 mushworld kernel: hub.c: port 3, portstatus 101, change 0, 12 Mb
/s
Dec 11 00:27:34 mushworld last message repeated 3 times
Dec 11 00:27:34 mushworld kernel: hub.c: port 3, portstatus 103, change 10, 12 M
b/s
Dec 11 00:27:34 mushworld kernel: hub.c: new USB device 00:1d.1-2.3, assigned ad
dress 9
Dec 11 00:27:34 mushworld kernel: usb-uhci.c: interrupt, status 2, frame# 1427
Dec 11 00:27:34 mushworld kernel: usb.c: USB device not accepting new address=9
(error=-110)
Dec 11 00:27:35 mushworld kernel: hub.c: port 3, portstatus 103, change 10, 12 M
b/s
Dec 11 00:27:35 mushworld kernel: hub.c: new USB device 00:1d.1-2.3, assigned ad
dress 10
Dec 11 00:27:35 mushworld kernel: usb.c: USB device not accepting new address=10
(error=-110)
Dec 11 00:27:35 mushworld kernel: hub.c: port 4, portstatus 100, change 0, 12 Mb
/s
Dec 11 00:27:35 mushworld kernel: hub.c: port 1, portstatus 303, change 0, 1.5 M
b/s
Dec 11 00:27:35 mushworld kernel: hub.c: port 2, portstatus 100, change 0, 12 Mb
/s
Dec 11 00:27:35 mushworld kernel: hub.c: port 3, portstatus 101, change 0, 12 Mb
/s
Dec 11 00:27:35 mushworld kernel: hub.c: port 4, portstatus 100, change 0, 12 Mb
/s
6. Evident by looking at syslog when plugging in camera.
7.1 mushworld:/usr/src/linux# sh scripts/ver_linux
If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.
Linux mushworld 2.4.23 #2 Wed Dec 10 18:53:53 PST 2003 i686 unknown
Gnu C 2.95.4
Gnu make 3.79.1
util-linux 2.11n
mount 2.11n
modutils 2.4.15
e2fsprogs 1.27
quota-tools 3.04.
PPP 2.4.1
Linux C Library 2.2.5
Dynamic linker (ldd) 2.2.5
Procps 2.0.7
Net-tools 1.60
Console-tools 0.2.3
Sh-utils 2.0.11
Modules Loaded usb-uhci quickcam parport_pc lp parport autofs w83781d i2
c-proc i2c-dev i2c-i801 ipt_state ipt_MASQUERADE ipt_LOG iptable_filter iptable_
nat ip_conntrack iptable_mangle usbserial 3c59x usb-storage hid joydev mousedev
usbmouse input b44 printer ipt_mac ipt_owner ipt_multiport ip_tables raid0 md vf
at fat tuner tvaudio bttv videodev i2c-algo-bit i2c-core ide-scsi sr_mod scsi_mo
d snd-pcm-oss snd-mixer-oss snd-intel8x0 snd-au8830 snd-pcm snd-page-alloc snd-t
imer gameport snd-mpu401-uart snd-rawmidi snd-seq-device snd-ac97-codec snd isa-
pnp uart401 sound soundcore
7.2
mushworld:/usr/src/linux# cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 15
model : 2
model name : Intel(R) Pentium(R) 4 CPU 2.53GHz
stepping : 7
cpu MHz : 2565.069
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat
pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe
bogomips : 5111.80
7.3
usb-uhci 21156 0 (unused)
quickcam 102656 0 (unused)
parport_pc 21096 1 (autoclean)
lp 7040 0 (autoclean)
parport 25024 1 (autoclean) [parport_pc lp]
autofs 9156 2 (autoclean)
w83781d 19520 0 (unused)
i2c-proc 6592 0 [w83781d]
i2c-dev 3968 0 (unused)
i2c-i801 4740 0 (unused)
ipt_state 608 0 (autoclean)
ipt_MASQUERADE 1792 0 (autoclean)
ipt_LOG 3264 4 (autoclean)
iptable_filter 1728 1 (autoclean)
iptable_nat 20468 0 (autoclean) [ipt_MASQUERADE]
ip_conntrack 25716 2 (autoclean) [ipt_state ipt_MASQUERADE iptable_nat]
iptable_mangle 2208 0 (autoclean) (unused)
usbserial 16544 0 (unused)
3c59x 24776 1
usb-storage 106304 0 (unused)
hid 21312 0 (unused)
joydev 7072 1
mousedev 3840 0 (unused)
usbmouse 1824 0 (unused)
input 3296 0 [hid joydev mousedev usbmouse]
b44 16064 1
printer 7392 0
ipt_mac 672 0 (unused)
ipt_owner 1344 0 (unused)
ipt_multiport 640 7
ip_tables 13952 11 [ipt_state ipt_MASQUERADE ipt_LOG iptable_filter
iptable_nat iptable_mangle ipt_mac ipt_owner ipt_multiport]
raid0 3328 0 (unused)
md 56256 0 [raid0]
vfat 9308 1
fat 29496 0 [vfat]
tuner 9412 2 (autoclean)
tvaudio 12448 0 (autoclean) (unused)
bttv 103136 0
videodev 5728 4 [quickcam bttv]
i2c-algo-bit 8300 2 [bttv]
i2c-core 15112 0 [w83781d i2c-proc i2c-dev i2c-i801 tuner tvaudio bttv
i2c-algo-bit]
ide-scsi 8992 0
sr_mod 13240 0 (unused)
scsi_mod 85000 2 [usb-storage ide-scsi sr_mod]
snd-pcm-oss 36516 1
snd-mixer-oss 11328 0 [snd-pcm-oss]
snd-intel8x0 16448 1
snd-au8830 44192 2
snd-pcm 55264 0 [snd-pcm-oss snd-intel8x0 snd-au8830]
snd-page-alloc 5668 0 [snd-intel8x0 snd-pcm]
snd-timer 14176 0 [snd-pcm]
gameport 1596 0 [snd-intel8x0 snd-au8830]
snd-mpu401-uart 2976 0 [snd-intel8x0 snd-au8830]
snd-rawmidi 12608 0 [snd-mpu401-uart]
snd-seq-device 3892 0 [snd-rawmidi]
snd-ac97-codec 39320 0 [snd-intel8x0 snd-au8830]
snd 30048 2 [snd-pcm-oss snd-mixer-oss snd-intel8x0 snd-au8830
snd-pcm snd-timer snd-mpu401-uart snd-rawmidi snd-seq-device snd-ac97-codec]
isa-pnp 28060 0 (unused)
uart401 6144 0 (unused)
sound 54316 0 [uart401]
soundcore 3524 12 [bttv snd sound]
7.4
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
02f8-02ff : serial(set)
0376-0376 : ide1
0378-037a : parport0
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial(set)
0cf8-0cff : PCI conf1
8400-843f : Intel Corp. 82801DB AC'97 Audio Controller
8800-88ff : Intel Corp. 82801DB AC'97 Audio Controller
9400-947f : 3Com Corporation 3c900B-TPO [Etherlink XL TPO]
9400-947f : 02:0d.0
9800-9807 : US Robotics/3Com 56K FaxModem Model 5610
9800-9807 : serial(auto)
a000-a007 : Aureal Semiconductor Vortex 2
a000-a007 : au8830
a400-a407 : Aureal Semiconductor Vortex 2
a400-a407 : au8830
a800-a87f : Promise Technology, Inc. PDC20376
b000-b00f : Promise Technology, Inc. PDC20376
b400-b43f : Promise Technology, Inc. PDC20376
b800-b87f : VIA Technologies, Inc. IEEE 1394 Host Controller
d000-d01f : Intel Corp. 82801DB USB (Hub #3)
d000-d01f : usb-uhci
d400-d41f : Intel Corp. 82801DB USB (Hub #2)
d400-d41f : usb-uhci
d800-d81f : Intel Corp. 82801DB USB (Hub #1)
d800-d81f : usb-uhci
e800-e81f : Intel Corp. 82801DB/DBM SMBus Controller
e800-e80f : i801-smbus
f000-f00f : Intel Corp. 82801DB Ultra ATA Storage Controller
f000-f007 : ide0
f008-f00f : ide1
00000000-0009cbff : System RAM
0009cc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000f0000-000fffff : System ROM
00100000-2ffebfff : System RAM
00100000-002567a0 : Kernel code
002567a1-002ef7b7 : Kernel data
2ffec000-2ffeefff : ACPI Tables
2ffef000-2fffefff : reserved
2ffff000-2fffffff : ACPI Non-volatile Storage
30000000-300003ff : Intel Corp. 82801DB Ultra ATA Storage Controller
f4800000-f48000ff : Intel Corp. 82801DB AC'97 Audio Controller
f4800000-f48000ff : Intel 82801DB-ICH4 - Controller
f5000000-f50001ff : Intel Corp. 82801DB AC'97 Audio Controller
f5000000-f50001ff : Intel 82801DB-ICH4 - AC'97
f5800000-f580007f : 3Com Corporation 3c900B-TPO [Etherlink XL TPO]
f6000000-f603ffff : Aureal Semiconductor Vortex 2
f6000000-f603ffff : au8830
f6800000-f6ffffff : Matrox Graphics, Inc. MGA 2164W [Millennium II]
f7000000-f7003fff : Matrox Graphics, Inc. MGA 2164W [Millennium II]
f7800000-f7801fff : Broadcom Corporation BCM4401 100Base-T
f7800000-f7801fff : b44
f8000000-f801ffff : Promise Technology, Inc. PDC20376
f8800000-f8800fff : Promise Technology, Inc. PDC20376
f9000000-f90007ff : VIA Technologies, Inc. IEEE 1394 Host Controller
f9800000-f98003ff : Intel Corp. 82801DB USB2
fa000000-fa000fff : Brooktree Corporation Bt878 Audio Capture (#2)
fa800000-fa800fff : Brooktree Corporation Bt878 Video Capture (#2)
fa800000-fa800fff : bttv
fb800000-fb800fff : Brooktree Corporation Bt878 Audio Capture
fc000000-fc000fff : Brooktree Corporation Bt878 Video Capture
fc000000-fc000fff : bttv
fd000000-fdffffff : Matrox Graphics, Inc. MGA 2164W [Millennium II]
fe000000-fe3fffff : Intel Corp. 82845G/GL [Brookdale-G] Chipset Host Bridge
fec00000-fec00fff : reserved
fee00000-fee00fff : reserved
ffff0000-ffffffff : reserved
7.5
00:00.0 Host bridge: Intel Corp.: Unknown device 2560 (rev 02)
Subsystem: Asustek Computer, Inc.: Unknown device 80b2
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort+
<MAbort+ >SERR- <PERR-
Latency: 0
Region 0: Memory at fe000000 (32-bit, prefetchable) [size=4M]
Capabilities: [e4] #09 [6105]
Capabilities: [a0] AGP version 2.0
Status: RQ=31 SBA+ 64bit- FW+ Rate=x1,x2
Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
00:01.0 PCI bridge: Intel Corp.: Unknown device 2561 (rev 02) (prog-if 00 [Normal
decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000e000-0000dfff
Memory behind bridge: fa000000-f9ffffff
Prefetchable memory behind bridge: fe000000-fdffffff
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
00:1d.0 USB Controller: Intel Corp.: Unknown device 24c2 (rev 02) (prog-if 00 [UHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 8089
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 9
Region 4: I/O ports at d800 [size=32]
00:1d.1 USB Controller: Intel Corp.: Unknown device 24c4 (rev 02) (prog-if 00 [UHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 8089
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 9
Region 4: I/O ports at d400 [size=32]
00:1d.2 USB Controller: Intel Corp.: Unknown device 24c7 (rev 02) (prog-if 00 [UHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 8089
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed to IRQ 9
Region 4: I/O ports at d000 [size=32]
00:1d.7 USB Controller: Intel Corp.: Unknown device 24cd (rev 02) (prog-if 20)
Subsystem: Asustek Computer, Inc.: Unknown device 8089
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin D routed to IRQ 10
Region 0: Memory at f9800000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] #0a [2080]
00:1e.0 PCI bridge: Intel Corp. 82820 820 (Camino 2) Chipset PCI (rev 82) (prog-if 00
[Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort+ <TAbort-
<MAbort- >SERR- <PERR+
Latency: 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
I/O behind bridge: 00009000-0000bfff
Memory behind bridge: f5800000-f97fffff
Prefetchable memory behind bridge: fa000000-fdffffff
BridgeCtl: Parity- SERR+ NoISA+ VGA+ MAbort- >Reset- FastB2B-
00:1f.0 ISA bridge: Intel Corp.: Unknown device 24c0 (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping-
SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
00:1f.1 IDE interface: Intel Corp.: Unknown device 24cb (rev 02) (prog-if 8a [Master
SecP PriP])
Subsystem: Asustek Computer, Inc.: Unknown device 8089
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 9
Region 0: I/O ports at <unassigned>
Region 1: I/O ports at <unassigned>
Region 2: I/O ports at <unassigned>
Region 3: I/O ports at <unassigned>
Region 4: I/O ports at f000 [size=16]
Region 5: Memory at 30000000 (32-bit, non-prefetchable) [size=1K]
00:1f.3 SMBus: Intel Corp.: Unknown device 24c3 (rev 02)
Subsystem: Asustek Computer, Inc.: Unknown device 8089
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 9
Region 4: I/O ports at e800 [size=32]
00:1f.5 Multimedia audio controller: Intel Corp.: Unknown device 24c5 (rev 02)
Subsystem: Asustek Computer, Inc.: Unknown device 80b0
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 9
Region 0: I/O ports at 8800 [size=256]
Region 1: I/O ports at 8400 [size=64]
Region 2: Memory at f5000000 (32-bit, non-prefetchable) [size=512]
Region 3: Memory at f4800000 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
02:03.0 FireWire (IEEE 1394): VIA Technologies, Inc. OHCI Compliant IEEE 1394 Host
Controller (rev 80) (prog-if 10 [OHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 808a
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping+
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 32 (8000ns max), cache line size 08
Interrupt: pin A routed to IRQ 7
Region 0: Memory at f9000000 (32-bit, non-prefetchable) [size=2K]
Region 1: I/O ports at b800 [size=128]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA
PME(D0-,D1-,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
02:04.0 RAID bus controller: Promise Technology, Inc.: Unknown device 3376 (rev 02)
Subsystem: Asustek Computer, Inc.: Unknown device 809e
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 96 (1000ns min, 4500ns max), cache line size 08
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at b400 [size=64]
Region 1: I/O ports at b000 [size=16]
Region 2: I/O ports at a800 [size=128]
Region 3: Memory at f8800000 (32-bit, non-prefetchable) [size=4K]
Region 4: Memory at f8000000 (32-bit, non-prefetchable) [size=128K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
02:05.0 Ethernet controller: BROADCOM Corporation: Unknown device 4401 (rev 01)
Subsystem: Asustek Computer, Inc.: Unknown device 80a8
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort+ <TAbort-
<MAbort- >SERR- <PERR-
Latency: 32
Interrupt: pin A routed to IRQ 5
Region 0: Memory at f7800000 (32-bit, non-prefetchable) [size=8K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
02:09.0 VGA compatible controller: Matrox Graphics, Inc. MGA 2164W [Millennium II]
(prog-if 00 [VGA])
Subsystem: Matrox Graphics, Inc.: Unknown device 2007
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 32
Interrupt: pin A routed to IRQ 11
Region 0: Memory at fd000000 (32-bit, prefetchable) [size=16M]
Region 1: Memory at f7000000 (32-bit, non-prefetchable) [size=16K]
Region 2: Memory at f6800000 (32-bit, non-prefetchable) [size=8M]
Expansion ROM at fcff0000 [disabled] [size=64K]
02:0a.0 Multimedia video controller: Brooktree Corporation Bt878 (rev 11)
Subsystem: Hauppauge computer works Inc. WinTV/GO
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 32 (4000ns min, 10000ns max)
Interrupt: pin A routed to IRQ 7
Region 0: Memory at fc000000 (32-bit, prefetchable) [size=4K]
Capabilities: [44] Vital Product Data
Capabilities: [4c] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
02:0a.1 Multimedia controller: Brooktree Corporation Bt878 (rev 11)
Subsystem: Hauppauge computer works Inc. WinTV/GO
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 32 (1000ns min, 63750ns max)
Interrupt: pin A routed to IRQ 7
Region 0: Memory at fb800000 (32-bit, prefetchable) [size=4K]
Capabilities: [44] Vital Product Data
Capabilities: [4c] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
02:0b.0 Multimedia audio controller: Aureal Semiconductor Vortex 2 (rev fe)
Subsystem: Diamond Multimedia Systems Monster Sound II
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 32 (1000ns min, 3000ns max), cache line size 08
Interrupt: pin A routed to IRQ 10
Region 0: Memory at f6000000 (32-bit, non-prefetchable) [size=256K]
Region 1: I/O ports at a400 [size=8]
Region 2: I/O ports at a000 [size=8]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
02:0c.0 Serial controller: US Robotics/3Com 56K FaxModem Model 5610 (rev 01) (prog-if
02 [16550])
Subsystem: US Robotics/3Com USR 56k Internal Voice Modem (Model 2976)
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 5
Region 0: I/O ports at 9800 [size=8]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA
PME(D0+,D1-,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
02:0d.0 Ethernet controller: 3Com Corporation 3c900B-TPO [Etherlink XL TPO] (rev 04)
Subsystem: 3Com Corporation 3C900B-TPO Etherlink XL TPO 10Mb
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 32 (2500ns min, 12000ns max), cache line size 08
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at 9400 [size=128]
Region 1: Memory at f5800000 (32-bit, non-prefetchable) [size=128]
Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
02:0e.0 Multimedia video controller: Brooktree Corporation Bt878 (rev 11)
Subsystem: Hauppauge computer works Inc. WinTV/GO
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 32 (4000ns min, 10000ns max)
Interrupt: pin A routed to IRQ 9
Region 0: Memory at fa800000 (32-bit, prefetchable) [size=4K]
Capabilities: [44] Vital Product Data
Capabilities: [4c] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
02:0e.1 Multimedia controller: Brooktree Corporation Bt878 (rev 11)
Subsystem: Hauppauge computer works Inc. WinTV/GO
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 32 (1000ns min, 63750ns max)
Interrupt: pin A routed to IRQ 9
Region 0: Memory at fa000000 (32-bit, prefetchable) [size=4K]
Capabilities: [44] Vital Product Data
Capabilities: [4c] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
-Greg
If you'd like to leave a message, you may do so by hitting the reply
button after the beep. BEEEEPPPPP!!!!
-------------------------------------------------------
This SF.net email is sponsored by: IBM Linux Tutorials.
Become an expert in LINUX or just sharpen your skills. Sign up for IBM's
Free Linux Tutorials. Learn everything from the bash shell to sys admin.
Click now! http://ads.osdn.com/?ad_id=1278&alloc_id=3371&op=click
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
