Steve Gowdy suggests:
Is usb-storage loaded at the point where you cat-ed /proc/bus/usb/devices? If so, you must need to update the unusual-dev.h file as it hasn't bound to it.
I do not know if I had inserted this module before or no. I just tried it, however,
and get the same results, except that this time /proc/.../devices shows the driver
to be usb-storage.
(as root):
~/temp :)modprobe usb-storage ~/temp :)cat /proc/bus/usb/devices
T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=054c ProdID=0010 Rev= 4.50 S: Manufacturer=Sony S: Product=Sony DSC C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 2mA I: If#= 0 Alt= 0 #EPs= 3 Cls=08(stor.) Sub=ff Prot=01 Driver=usb-storage E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
~/temp :)mount /dev/sda /mnt/camera/ -t vfat mount: /dev/sda is not a valid block device ~/temp :)mount /dev/sda /mnt/camera/ -t auto mount: /dev/sda is not a valid block device ~/temp :)mount /dev/sda1 /mnt/camera/ -t auto mount: /dev/sda1 is not a valid block device ~/temp :)mount /dev/sda1 /mnt/camera/ -t vfat mount: /dev/sda1 is not a valid block device
--
I want to go farther, farther!
A. E. L.
------------------------------------------------------- This SF.net email is sponsored by: IBM Linux Tutorials. Become an expert in LINUX or just sharpen your skills. Sign up for IBM's Free Linux Tutorials. Learn everything from the bash shell to sys admin. Click now! http://ads.osdn.com/?ad_id=1278&alloc_id=3371&op=click _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
