Use new boolean CONFIG_* symbols.
[USB] gadget zero config updates Use new boolean CONFIG_* symbols.
--- a/drivers/usb/gadget/zero.c Wed Jan 21 12:56:53 2004
+++ b/drivers/usb/gadget/zero.c Wed Jan 21 12:56:53 2004
@@ -131,7 +131,7 @@
* DMA channels to manage their FIFOs. It supports high speed.
* Those endpoints can be arranged in any desired configuration.
*/
-#ifdef CONFIG_USB_ZERO_NET2280
+#if defined(CONFIG_USB_GADGET_NET2280) || defined(CONFIG_USB_GADGET_DUMMY_HCD)
#define CHIP "net2280"
#define DRIVER_VERSION_NUM 0x0101
static const char EP_OUT_NAME [] = "ep-a";
@@ -154,7 +154,7 @@
* can't use altsettings or reset the interfaces independently.
* So stick to a single interface.
*/
-#ifdef CONFIG_USB_ZERO_PXA2XX
+#ifdef CONFIG_USB_GADGET_PXA2XX
#define CHIP "pxa2xx"
#define DRIVER_VERSION_NUM 0x0103
static const char EP_OUT_NAME [] = "ep12out-bulk";
@@ -176,7 +176,7 @@
* in special situations. So this is a case of "choose it right
* during enumeration" ...
*/
-#ifdef CONFIG_USB_ZERO_SA1100
+#ifdef CONFIG_USB_GADGET_SA1100
#define CHIP "sa1100"
#define DRIVER_VERSION_NUM 0x0105
static const char EP_OUT_NAME [] = "ep1out-bulk";
@@ -192,7 +192,7 @@
*
* This has three semi-configurable full speed bulk/interrupt endpoints.
*/
-#ifdef CONFIG_USB_ZERO_GOKU
+#ifdef CONFIG_USB_GADGET_GOKU
#define CHIP "goku"
#define DRIVER_VERSION_NUM 0x0106
static const char EP_OUT_NAME [] = "ep1-bulk";
@@ -936,7 +936,7 @@
if (number == dev->config)
return 0;
-#ifdef CONFIG_USB_ZERO_SA1100
+#ifdef CONFIG_USB_GADGET_SA1100
if (dev->config) {
/* tx fifo is full, but we can't clear it...*/
INFO (dev, "can't change configurations\n");
