Hello,
I got the following in 'demesg' when plug-in a Minolta Dimage S414:
hub 1-0:1.0: port 2, status 101, change 1, 12 Mb/s
drivers/usb/host/uhci-hcd.c: e000: wakeup_hc
hub 1-0:1.0: debounce: port 2: delay 100ms stable 4 status 0x101
hub 1-0:1.0: new USB device on port 2, assigned address 2
usb 1-2: new device strings: Mfr=1, Product=2, SerialNumber=0
drivers/usb/core/message.c: USB device number 2 default language ID 0x409
usb 1-2: Product: DIMAGE CAMERA
usb 1-2: Manufacturer: MINOLTA DIMAGE CAMERA
drivers/usb/core/usb.c: usb_hotplug
usb 1-2: registering 1-2:1.0 (config #1, interface 0)
drivers/usb/core/usb.c: usb_hotplug
Initializing USB Mass Storage driver...
usb-storage 1-2:1.0: usb_probe_interface
usb-storage 1-2:1.0: usb_probe_interface - got id
usb-storage: This device (0686,4014,0001 S 06 P 50) has unneeded SubClass and Protocol
entries in unusual_devs.h
Please send a copy of this message to <[EMAIL PROTECTED]>
scsi0 : SCSI emulation for USB Mass Storage devices
Vendor: MINOLTA Model: DIMAGE CAMERA Rev: 1.00
Type: Direct-Access ANSI SCSI revision: 02
SCSI device sda: 31072 512-byte hdwr sectors (16 MB)
sda: assuming Write Enabled
sda: assuming drive cache: write through
sda: sda1
Regards,
Stef
-------------------------------------------------------
The SF.Net email is sponsored by EclipseCon 2004
Premiere Conference on Open Tools Development and Integration
See the breadth of Eclipse activity. February 3-5 in Anaheim, CA.
http://www.eclipsecon.org/osdn
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
