ChangeSet 1.1276.8.3, 2004/01/28 12:28:44-08:00, [EMAIL PROTECTED]

[PATCH] USB: EHCI support on MIPS

 From Darwin Rambo, <[EMAIL PROTECTED]>

   These get rid of 8 and 16 byte PCI access, which don't work
   on some MIPS platforms.


 drivers/usb/host/ehci-dbg.c |    3 ++-
 drivers/usb/host/ehci-hcd.c |    6 +++---
 drivers/usb/host/ehci.h     |    9 ++++++---
 3 files changed, 11 insertions(+), 7 deletions(-)


diff -Nru a/drivers/usb/host/ehci-dbg.c b/drivers/usb/host/ehci-dbg.c
--- a/drivers/usb/host/ehci-dbg.c       Wed Jan 28 13:36:25 2004
+++ b/drivers/usb/host/ehci-dbg.c       Wed Jan 28 13:36:25 2004
@@ -73,6 +73,7 @@
 
                buf[0] = 0;
                for (i = 0; i < HCS_N_PORTS (params); i++) {
+                       // FIXME MIPS won't readb() ...
                        byte = readb (&ehci->caps->portroute[(i>>1)]);
                        sprintf(tmp, "%d ", 
                                ((i & 0x1) ? ((byte)&0xf) : ((byte>>4)&0xf)));
@@ -571,7 +572,7 @@
        spin_lock_irqsave (&ehci->lock, flags);
 
        /* Capability Registers */
-       i = readw (&ehci->caps->hci_version);
+       i = HC_VERSION(readl (&ehci->caps->hc_capbase));
        temp = snprintf (next, size,
                "%s\nEHCI %x.%02x, hcd state %d (driver " DRIVER_VERSION ")\n",
                pdev->dev.name,
diff -Nru a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
--- a/drivers/usb/host/ehci-hcd.c       Wed Jan 28 13:36:25 2004
+++ b/drivers/usb/host/ehci-hcd.c       Wed Jan 28 13:36:25 2004
@@ -333,8 +333,8 @@
        spin_lock_init (&ehci->lock);
 
        ehci->caps = (struct ehci_caps *) hcd->regs;
-       ehci->regs = (struct ehci_regs *) (hcd->regs +
-                               readb (&ehci->caps->length));
+       ehci->regs = (struct ehci_regs *) (hcd->regs +
+                               HC_LENGTH (readl (&ehci->caps->hc_capbase)));
        dbg_hcs_params (ehci, "ehci_start");
        dbg_hcc_params (ehci, "ehci_start");
 
@@ -486,7 +486,7 @@
 
         /* PCI Serial Bus Release Number is at 0x60 offset */
        pci_read_config_byte (hcd->pdev, 0x60, &tempbyte);
-       temp = readw (&ehci->caps->hci_version);
+       temp = HC_VERSION(readl (&ehci->caps->hc_capbase));
        ehci_info (ehci,
                "USB %x.%x enabled, EHCI %x.%02x, driver %s\n",
                ((tempbyte & 0xf0)>>4), (tempbyte & 0x0f),
diff -Nru a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
--- a/drivers/usb/host/ehci.h   Wed Jan 28 13:36:25 2004
+++ b/drivers/usb/host/ehci.h   Wed Jan 28 13:36:25 2004
@@ -153,9 +153,12 @@
 
 /* Section 2.2 Host Controller Capability Registers */
 struct ehci_caps {
-       u8              length;         /* CAPLENGTH - size of this struct */
-       u8              reserved;       /* offset 0x1 */
-       u16             hci_version;    /* HCIVERSION - offset 0x2 */
+       /* these fields are specified as 8 and 16 bit registers,
+        * but some hosts can't perform 8 or 16 bit PCI accesses.
+        */
+       u32     hc_capbase;
+#define HC_LENGTH(p)           (((p)>>00)&0x00ff)      /* bits 7:0 */
+#define HC_VERSION(p)          (((p)>>16)&0xffff)      /* bits 31:16 */
        u32             hcs_params;     /* HCSPARAMS - offset 0x4 */
 #define HCS_DEBUG_PORT(p)      (((p)>>20)&0xf) /* bits 23:20, debug port? */
 #define HCS_INDICATOR(p)       ((p)&(1 << 16)) /* true: has port indicators */



-------------------------------------------------------
The SF.Net email is sponsored by EclipseCon 2004
Premiere Conference on Open Tools Development and Integration
See the breadth of Eclipse activity. February 3-5 in Anaheim, CA.
http://www.eclipsecon.org/osdn
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel

Reply via email to