I have a USB card reader that shipped as part of my new computer. I am using 2.4.25-pre8 and seeing something rather odd -- it is detecting medium not present, then proceeds to guess the device has a 1 GB disk...
Initializing USB Mass Storage driver... usb.c: registered new driver usb-storage scsi0 : SCSI emulation for USB Mass Storage devices Vendor: Generic Model: STORAGE DEVICE Rev: 0113 Type: Direct-Access ANSI SCSI revision: 02 Vendor: Generic Model: STORAGE DEVICE Rev: 0113 Type: Direct-Access ANSI SCSI revision: 02 Vendor: Generic Model: STORAGE DEVICE Rev: 0113 Type: Direct-Access ANSI SCSI revision: 02 Vendor: Generic Model: STORAGE DEVICE Rev: 0113 Type: Direct-Access ANSI SCSI revision: 02 Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0 Attached scsi removable disk sdb at scsi0, channel 0, id 0, lun 1 Attached scsi removable disk sdc at scsi0, channel 0, id 0, lun 2 Attached scsi removable disk sdd at scsi0, channel 0, id 0, lun 3 SCSI device sda: 15680 512-byte hdwr sectors (8 MB) sda: Write Protect is off sda: sda1 sdb: Unit Not Ready, sense: Current 00:00: sense key Not Ready Additional sense indicates Medium not present sdb : READ CAPACITY failed. sdb : status = 1, message = 00, host = 0, driver = 08 Current sd00:00: sense key Not Ready Additional sense indicates Medium not present sdb : block size assumed to be 512 bytes, disk size 1GB. sdb: I/O error: dev 08:10, sector 0 I/O error: dev 08:10, sector 0 ldm_validate_partition_table(): Disk read failed. I/O error: dev 08:10, sector 0 unable to read partition table [------------More ENOMEDIUM noise-----------------] -Erik -- Erik B. Andersen http://codepoet-consulting.com/ --This message was written using 73% post-consumer electrons-- ------------------------------------------------------- The SF.Net email is sponsored by EclipseCon 2004 Premiere Conference on Open Tools Development and Integration See the breadth of Eclipse activity. February 3-5 in Anaheim, CA. http://www.eclipsecon.org/osdn _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
