On Wed, 4 Feb 2004, Phil Dibowitz wrote:
> I just upgraded to 2.6.2 and the timeout problem has gone away. However,
> in my debug messages (I turned on USB verbose debugging), I still get:
>
> Feb 4 10:12:08 rider kernel: drivers/usb/host/uhci-hcd.c: c400: suspend_hc
> Feb 4 10:12:09 rider kernel: drivers/usb/host/uhci-hcd.c: c800: suspend_hc
Those messages are of course normal if you don't have any USB devices
plugged in to the ports. If you do have devices attached when the UHCI
driver starts up then those messages shouldn't appear. If you attach
devices after start up then you should see something like
c400: wakeup_hc
> And it still doesn't seem to notice me attaching USB devices.
>
> I've been poking and prodding for a few days now and I'm not quite sure
> how to debug this issue....
You said before that the controllers don't work under 2.4 either. Maybe
that means they're just broken somehow.
Alan Stern
-------------------------------------------------------
The SF.Net email is sponsored by EclipseCon 2004
Premiere Conference on Open Tools Development and Integration
See the breadth of Eclipse activity. February 3-5 in Anaheim, CA.
http://www.eclipsecon.org/osdn
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
