On Sun, 8 Feb 2004, Francis, Chong Chan Fai wrote: > Hi, > > I have my laptop installed with Fedora Core (Kernel 2.4.22), and I want to > use a USB 2.0 120G hard drive via a Cardbus USB2.0 adaptor. > I plug the Cardbus card, and then the USB2.0 HD, (after a few config) linux > recognize my HD and I can use mount /dev/sda1 /mnt/extra to mount it. > > HOWEVER, the disk fail after a few read or write operation. From error log: > Feb 8 12:57:15 wind kernel: SCSI device sda: 234441648 512-byte hdwr > sectors (120034 MB) > Feb 8 12:57:15 wind kernel: sda: assuming drive cache: write through > Feb 8 12:57:16 wind kernel: sda: sda1 sda2 < sda5 > > Feb 8 12:57:16 wind kernel: Attached scsi disk sda at scsi0, channel 0, id > 0, lun 0 > Feb 8 12:57:16 wind kernel: EXT2-fs warning: mounting unchecked fs, running > e2fsck is recommended > Feb 8 13:13:40 wind kernel: SCSI error : <0 0 0 0> return code = 0x6000000 > Feb 8 13:13:40 wind kernel: end_request: I/O error, dev sda, sector > 76276607 > Feb 8 13:15:30 wind kernel: SCSI error : <0 0 0 0> return code = 0x6000000 > Feb 8 13:15:30 wind kernel: end_request: I/O error, dev sda, sector > 76276615 > > The drive than cannot recognize by the USB2.0 port again until reboot. > > The same hardware work perfectly in Windows 2000, > It works too when I connect the USB to a USB1.0 port in my machine, so I'm > quite sure it is the problem with the ehci-hcd driver. > > I have updated to 2.6.2 kernel, it doesnˇ¦t help. > Kernel setting like "acpi=off" "pci=biosirq" "acpi=off" doesnˇ¦t help > neither. > > Could any give me a help? Thank you very much!
Some more details about what goes wrong would be helpful. Try configuring your kernel with usb-storage debugging turned on, and post the debugging log you get when the errors start occurring. Alan Stern ------------------------------------------------------- The SF.Net email is sponsored by EclipseCon 2004 Premiere Conference on Open Tools Development and Integration See the breadth of Eclipse activity. February 3-5 in Anaheim, CA. http://www.eclipsecon.org/osdn _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
