The prism2_usb driver is from the linux-wlan-ng project at http://www.linux-wlan.com/linux-wlan/index.html#Download
This driver driver compiles OK under 2.6.3 and loads, but the problem is that the device is not recognised by the USB kernel subsystem before that..
Under 2.4.23 (and without loading the prism2_usb driver) I get the following output from #lsusb:
Bus 001 Device 001: ID 0000:0000
Bus 001 Device 002: ID 066b:2212 Linksys, Inc. WUSB11v2.5 802.11b Adapter
Under 2.6.3 I get: Bus 001 Device 001: ID 0000:0000
Robert Gadsdon
Greg KH wrote:
On Mon, Feb 23, 2004 at 01:11:34AM +0000, Robert Gadsdon wrote:
I had my Linksys prism2 USB wireless adapter (WUSB11 v2.5) working reasonably well with kernel 2.4.23, but with kernel 2.6.3 (and udev 018) I get:
usb 1-1: new full speed USB device using address 5 drivers/usb/core/config.c: invalid interface number (1/1) usb 1-1: can't read configurations, error -22
#modprobe prism2_usb gives: prism2usb_init: prism2_usb.o: 0.2.1-pre20 Loaded prism2usb_init: dev_info is: prism2_usb drivers/usb/core/usb.c: registered new driver prism2_usb
#lsusb does not show the device at all...
Is this still 'work in progress'?
I don't see this driver in the kernel tree. Where did you find it?
thanks,
greg k-h
-- .................................. Robert Gadsdon 01442 872 633 [EMAIL PROTECTED] ..................................
------------------------------------------------------- SF.Net is sponsored by: Speed Start Your Linux Apps Now. Build and deploy apps & Web services for Linux with a free DVD software kit from IBM. Click Now! http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
