Am Dienstag, 24. Februar 2004 08:18 schrieb Matthew Dharm: > Patches have already been sent to fix this.
OK, it works now with
UNUSUAL_DEV( 0x04cb, 0x0100, 0x0000, 0x2210,
"Fujifilm",
"FinePix 1400Zoom",
- US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_INQUIRY),
+ US_SC_UFI, US_PR_DEVICE, NULL, US_FL_FIX_INQUIRY),
in unusual_devs.h, which I found in 2.6.3-bk6. Sorry that I didn't find it before on
my own.
Thank you anyway,
Martin Küchler
> On Mon, Feb 23, 2004 at 05:20:54PM +0100, Martin K?chler wrote:
> > Hello,
> >
> > with kernel 2.6.x my usb-camera stopped working:
> >
> > Feb 23 11:02:54 polymeraki vmunix: usb 3-2: new full speed USB device
> > using address 2 Feb 23 11:02:54 polymeraki vmunix: Initializing USB Mass
> > Storage driver... Feb 23 11:02:54 polymeraki vmunix: scsi1 : SCSI
> > emulation for USB Mass Storage devices Feb 23 11:02:54 polymeraki
> > scsi.agent[927]: how to add device type= at
> > /devices/pci0000:00/0000:00:10.1/usb3/3-2/3-2:1.0/host1/1:0:0:0 ?? Feb 23
> > 11:02:54 polymeraki kernel: Vendor: Fujifilm Model: FinePix 1400Zoom
> > Rev: 1000 Feb 23 11:02:54 polymeraki kernel: Type: Direct-Access
> > ANSI SCSI revision: 02 Feb 23 11:03:00 polymeraki vmunix:
> > sda : READ CAPACITY failed.
> > Feb 23 11:03:00 polymeraki vmunix: sda : status=0, message=00, host=7,
> > driver=00 Feb 23 11:03:00 polymeraki vmunix: sda : sense not available.
> > Feb 23 11:03:00 polymeraki vmunix: sda: assuming Write Enabled
> > Feb 23 11:03:00 polymeraki vmunix: sda: assuming drive cache: write
> > through Feb 23 11:03:00 polymeraki vmunix: sda : READ CAPACITY failed.
> > Feb 23 11:03:00 polymeraki vmunix: sda : status=0, message=00, host=7,
> > driver=00 Feb 23 11:03:00 polymeraki vmunix: sda : sense not available.
> > Feb 23 11:03:00 polymeraki vmunix: sda: assuming Write Enabled
> > Feb 23 11:03:00 polymeraki vmunix: sda: assuming drive cache: write
> > through Feb 23 11:03:01 polymeraki kernel: sda : READ CAPACITY failed.
> > Feb 23 11:03:01 polymeraki kernel: sda : status=0, message=00, host=7,
> > driver=00 Feb 23 11:03:01 polymeraki vmunix: Attached scsi removable disk
> > sda at scsi1, channel 0, id 0, lun 0 Feb 23 11:03:01 polymeraki vmunix:
> > WARNING: USB Mass Storage data integrity not assured Feb 23 11:03:01
> > polymeraki vmunix: USB Mass Storage device found at 2 Feb 23 11:03:01
> > polymeraki vmunix: drivers/usb/core/usb.c: registered new driver
> > usb-storage Feb 23 11:03:01 polymeraki vmunix: USB Mass Storage support
> > registered. Feb 23 11:03:01 polymeraki kernel: sda : sense not available.
> > Feb 23 11:03:01 polymeraki kernel: sda: assuming Write Enabled
> > Feb 23 11:03:01 polymeraki kernel: sda: assuming drive cache: write
> > through Feb 23 11:03:01 polymeraki kernel: sda:<3>Buffer I/O error on
> > device sda, logical block 0 Feb 23 11:03:01 polymeraki kernel: Buffer I/O
> > error on device sda, logical block 0 Feb 23 11:03:01 polymeraki kernel:
> > ldm_validate_partition_table(): Disk read failed. Feb 23 11:03:01
> > polymeraki kernel: Buffer I/O error on device sda, logical block 0 Feb 23
> > 11:03:01 polymeraki kernel: unable to read partition table Feb 23
> > 11:03:01 polymeraki kernel: sda:<3>Buffer I/O error on device sda,
> > logical block 0 Feb 23 11:03:01 polymeraki kernel:
> > ldm_validate_partition_table(): Disk read failed. Feb 23 11:03:01
> > polymeraki kernel: Buffer I/O error on device sda, logical block 0 Feb 23
> > 11:03:01 polymeraki kernel: unable to read partition table
> >
> > This is kernel 2.6.3, same with 2.6.0-test9, 2.6.1, 2.6.2.
> >
> > Everything works fine with 2.4.20 and 2.4.22.
> >
> > I have seen that there were various fixes for usb-storage since 2.6.0
> > (particularly some mode-sense problems are supposed to be fixed?),
> > there is also an entry in unusual_devs.h:
> >
> > UNUSUAL_DEV( 0x04cb, 0x0100, 0x0000, 0x2210,
> > "Fujifilm",
> > "FinePix 1400Zoom",
> > US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_INQUIRY),
> >
> > but all that doesn't seem to have impressed my Fuji camera.
> >
> > The same error has been reported here:
> > http://www.mail-archive.com/[EMAIL PROTECTED]/msg0908
> >8.html but no result.
> >
> > Should I open a kernel bug on this issue or may there be something else
> > causing the error ?
> >
> > TIA,
> >
> > Martin Küchler
> >
> >
> >
> > -------------------------------------------------------
> > SF.Net is sponsored by: Speed Start Your Linux Apps Now.
> > Build and deploy apps & Web services for Linux with
> > a free DVD software kit from IBM. Click Now!
> > http://ads.osdn.com/?ad_id56&alloc_id438&opÌk
> > _______________________________________________
> > [EMAIL PROTECTED]
> > To unsubscribe, use the last form field at:
> > https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
--
PGP/GPG-Key: http://www.k0k.net/public-key.asc
pgp00000.pgp
Description: signature
