Am Sonntag, 14. M�rz 2004 21:01 schrieb Christian Hesse:
> On Sunday 14 March 2004 19:37, Oliver Neukum wrote:
> > > I've just tested a bit more.
> > > I can plug in and unplug the device if all modules are loaded and no bt
> > > daemons are running.
> > > If hic0 is brought up by hcid I have to bring it down manually and then
> > > can unplug the device. If the device is still up while unplugging the
> > > kernel oopses.
> >
> > Could you enable debugging and send in the log?
>
> Enabled CONFIG_USB_DEBUG, log is attached.
>
> device plugged at 20:21:07
> hciconfig hci0 down at 20:21:43
> device unplugged at 20:22:00
> device plugged at 20:22:54
> Oops on unplug
When did you unplug?
Regards
Oliver
-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id70&alloc_id638&op=click
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
