ChangeSet 1.1608.24.25, 2004/02/27 17:36:56-08:00, [EMAIL PROTECTED]
[PATCH] USB: update driver for ATI USB/RF remotes
drivers/usb/input/ati_remote.c | 143 ++++++++++++++++++++++-------------------
1 files changed, 80 insertions(+), 63 deletions(-)
diff -Nru a/drivers/usb/input/ati_remote.c b/drivers/usb/input/ati_remote.c
--- a/drivers/usb/input/ati_remote.c Tue Mar 16 15:05:25 2004
+++ b/drivers/usb/input/ati_remote.c Tue Mar 16 15:05:25 2004
@@ -93,27 +93,24 @@
#define DRIVER_VERSION "2.2.0"
#define DRIVER_AUTHOR "Torrey Hoffman <[EMAIL PROTECTED]>"
-#define DRIVER_DESC "USB driver for ATI/X10 RF Remote Control"
+#define DRIVER_DESC "ATI/X10 RF USB Remote Control"
#define NAME_BUFSIZE 80 /* size of product name, path buffers */
#define DATA_BUFSIZE 63 /* size of URB data buffers */
#define ATI_INPUTNUM 1 /* Which input device to register as */
-#ifdef CONFIG_USB_DEBUG
- static int debug = 1;
-#else
- static int debug;
-#endif
-module_param(debug, int, 444);
-MODULE_PARM_DESC(debug, "Enable / disable debug messages");
-
unsigned long channel_mask = 0;
module_param(channel_mask, ulong, 444);
MODULE_PARM_DESC(channel_mask, "Bitmask of remote control channels to ignore");
-#undef dbg
-#define dbg(format, arg...) do { if (debug) printk(KERN_DEBUG __FILE__ ": " format
"\n" , ## arg); } while (0)
+int debug = 0;
+module_param(debug, int, 444);
+MODULE_PARM_DESC(debug, "Enable extra debug messages and information");
+#define dbginfo(dev, format, arg...) do { if (debug) dev_info(dev , format , ## arg);
} while (0)
+#undef err
+#define err(format, arg...) printk(KERN_ERR format , ## arg)
+
static struct usb_device_id ati_remote_table[] = {
{ USB_DEVICE(ATI_REMOTE_VENDOR_ID, ATI_REMOTE_PRODUCT_ID) },
{} /* Terminating entry */
@@ -132,6 +129,16 @@
static char init1[] = { 0x01, 0x00, 0x20, 0x14 };
static char init2[] = { 0x01, 0x00, 0x20, 0x14, 0x20, 0x20, 0x20 };
+/* Acceleration curve for directional control pad */
+static char accel[] = { 1, 2, 4, 6, 9, 13, 20 };
+
+/* Duplicate event filtering time.
+ * Sequential, identical KIND_FILTERED inputs with less than
+ * FILTER_TIME jiffies between them are dropped.
+ * (HZ >> 4) == 1/16th of a second and works well for me.
+ */
+#define FILTER_TIME (HZ >> 4)
+
struct ati_remote {
struct input_dev idev;
struct usb_device *udev;
@@ -279,12 +286,12 @@
static void ati_remote_dump(unsigned char *data, unsigned int len)
{
if ((len == 1) && (data[0] != (unsigned char)0xff) && (data[0] != 0x00))
- warn("Weird byte 0x%02x", data[0]);
+ warn("Weird byte 0x%02x\n", data[0]);
else if (len == 4)
- warn("Weird key %02x %02x %02x %02x",
+ warn("Weird key %02x %02x %02x %02x\n",
data[0], data[1], data[2], data[3]);
else
- warn("Weird data, len=%d %02x %02x %02x %02x %02x %02x ...",
+ warn("Weird data, len=%d %02x %02x %02x %02x %02x %02x ...\n",
len, data[0], data[1], data[2], data[3], data[4], data[5]);
}
@@ -301,7 +308,8 @@
/* On first open, submit the read urb which was set up previously. */
ati_remote->irq_urb->dev = ati_remote->udev;
if (usb_submit_urb(ati_remote->irq_urb, GFP_KERNEL)) {
- err(" %s: usb_submit_urb failed!", __FUNCTION__);
+ dev_err(&ati_remote->interface->dev,
+ "%s: usb_submit_urb failed!\n", __FUNCTION__);
ati_remote->open--;
return -EIO;
}
@@ -317,12 +325,12 @@
struct ati_remote *ati_remote = inputdev->private;
if (ati_remote == NULL) {
- dbg("%s - object is NULL !", __FUNCTION__);
+ err("ati_remote: %s: object is NULL!\n", __FUNCTION__);
return;
}
if (ati_remote->open <= 0)
- dbg("%s - ati_remote not open.", __FUNCTION__);
+ dev_dbg(&ati_remote->interface->dev, "%s: Not open.\n", __FUNCTION__);
else
--ati_remote->open;
@@ -339,7 +347,8 @@
struct ati_remote *ati_remote = urb->context;
if (urb->status) {
- warn("output urb completion status %d received", urb->status);
+ dev_dbg(&ati_remote->interface->dev, "%s: status %d\n",
+ __FUNCTION__, urb->status);
return;
}
@@ -375,7 +384,8 @@
if (retval) {
set_current_state(TASK_RUNNING);
remove_wait_queue(&ati_remote->wait, &wait);
- dbg("sendpacket: usb_submit_urb failed: %d", retval);
+ dev_dbg(&ati_remote->interface->dev,
+ "sendpacket: usb_submit_urb failed: %d\n", retval);
return retval;
}
@@ -432,21 +442,26 @@
}
/* Mask unwanted remote channels. */
- /* note: remote_num is 0-based, channel 1 selected on remote == 0 here */
+ /* note: remote_num is 0-based, channel 1 on remote == 0 here */
remote_num = (data[3] >> 4) & 0x0f;
- if (channel_mask & (1 << (remote_num + 1))) {
- dbg("Remote 0x02%x masked. mask = 0x%02lx",
- remote_num, channel_mask);
+ if (channel_mask & (1 << (remote_num + 1))) {
+ dbginfo(&ati_remote->interface->dev,
+ "Masked input from channel 0x%02x: data %02x,%02x, mask=
0x%02lx\n",
+ remote_num, data[1], data[2], channel_mask);
return;
}
- dbg("Remote channel 0x%02x: %02x%02x", remote_num, data[1], data[2]);
/* Look up event code index in translation table */
index = ati_remote_event_lookup(remote_num, data[1], data[2]);
if (index < 0) {
- warn("Unknown key=%02x%02x", data[1], data[2]);
+ dev_warn(&ati_remote->interface->dev,
+ "Unknown input from channel 0x%02x: data %02x,%02x\n",
+ remote_num, data[1], data[2]);
return;
- }
+ }
+ dbginfo(&ati_remote->interface->dev,
+ "channel 0x%02x; data %02x,%02x; index %d; keycode %d\n",
+ remote_num, data[1], data[2], index, ati_remote_tbl[index].code);
if (ati_remote_tbl[index].kind == KIND_LITERAL) {
input_regs(dev, regs);
@@ -460,11 +475,10 @@
}
if (ati_remote_tbl[index].kind == KIND_FILTERED) {
- /* Filter duplicate events which happen "too close" together,
- * considered here to be anything less than a quarter second */
+ /* Filter duplicate events which happen "too close" together. */
if ((ati_remote->old_data[0] == data[1]) &&
(ati_remote->old_data[1] == data[2]) &&
- ((ati_remote->old_jiffies + (HZ >> 2)) > jiffies)) {
+ ((ati_remote->old_jiffies + FILTER_TIME) > jiffies)) {
ati_remote->old_jiffies = jiffies;
return;
}
@@ -484,25 +498,25 @@
/*
* Other event kinds are from the directional control pad, and have an
- * acceleration factor applied to them. Without added acceleration, the
- * control pad is pretty unusable.
+ * acceleration factor applied to them. Without this acceleration, the
+ * control pad is mostly unusable.
*
* If elapsed time since last event is > 1/4 second, user "stopped",
* so reset acceleration. Otherwise, user is probably holding the control
* pad down, so we increase acceleration, ramping up over two seconds to
- * a maximum speed.
+ * a maximum speed. The acceleration curve is #defined above.
*/
if ((jiffies - ati_remote->old_jiffies) > (HZ >> 2)) {
acc = 1;
ati_remote->acc_jiffies = jiffies;
}
- else if ((jiffies - ati_remote->acc_jiffies) < (HZ >> 3)) acc = 1;
- else if ((jiffies - ati_remote->acc_jiffies) < (HZ >> 2)) acc = 2;
- else if ((jiffies - ati_remote->acc_jiffies) < (HZ >> 1)) acc = 3;
- else if ((jiffies - ati_remote->acc_jiffies) < HZ ) acc = 4;
- else if ((jiffies - ati_remote->acc_jiffies) < HZ+(HZ>>1)) acc = 6;
- else if ((jiffies - ati_remote->acc_jiffies) < (HZ << 1)) acc = 10;
- else acc = 16;
+ else if ((jiffies - ati_remote->acc_jiffies) < (HZ >> 3)) acc = accel[0];
+ else if ((jiffies - ati_remote->acc_jiffies) < (HZ >> 2)) acc = accel[1];
+ else if ((jiffies - ati_remote->acc_jiffies) < (HZ >> 1)) acc = accel[2];
+ else if ((jiffies - ati_remote->acc_jiffies) < HZ ) acc = accel[3];
+ else if ((jiffies - ati_remote->acc_jiffies) < HZ+(HZ>>1)) acc = accel[4];
+ else if ((jiffies - ati_remote->acc_jiffies) < (HZ << 1)) acc = accel[5];
+ else acc = accel[6];
input_regs(dev, regs);
switch (ati_remote_tbl[index].kind) {
@@ -528,7 +542,8 @@
input_report_rel(dev, REL_Y, acc);
break;
default:
- dbg("ati_remote kind=%d", ati_remote_tbl[index].kind);
+ dev_dbg(&ati_remote->interface->dev, "ati_remote kind=%d\n",
+ ati_remote_tbl[index].kind);
}
input_sync(dev);
@@ -545,25 +560,25 @@
struct ati_remote *ati_remote = urb->context;
int retval;
- switch (urb->status)
- {
+ switch (urb->status) {
case 0: /* success */
ati_remote_input_report(urb, regs);
break;
case -ECONNRESET: /* unlink */
case -ENOENT:
case -ESHUTDOWN:
- dbg("%s: urb error status (unlink?)", __FUNCTION__);
+ dev_dbg(&ati_remote->interface->dev, "%s: urb error status, unlink?
\n",
+ __FUNCTION__);
return;
default: /* error */
- dbg("%s: Nonzero urb status %d", __FUNCTION__, urb->status);
+ dev_dbg(&ati_remote->interface->dev, "%s: Nonzero urb status %d\n",
+ __FUNCTION__, urb->status);
}
retval = usb_submit_urb(urb, SLAB_ATOMIC);
if (retval)
- err("%s: can't resubmit urb, %s-%s/input%d, status %d",
- __FUNCTION__, ati_remote->udev->bus->bus_name,
- ati_remote->udev->devpath, ATI_INPUTNUM, retval);
+ dev_err(&ati_remote->interface->dev, "%s: usb_submit_urb()=%d\n",
+ __FUNCTION__, retval);
}
/*
@@ -654,7 +669,8 @@
/* send initialization strings */
if ((ati_remote_sendpacket(ati_remote, 0x8004, init1)) ||
(ati_remote_sendpacket(ati_remote, 0x8007, init2))) {
- err("Initializing ati_remote hardware failed.");
+ dev_err(&ati_remote->interface->dev,
+ "Initializing ati_remote hardware failed.\n");
return 1;
}
@@ -686,34 +702,34 @@
iface_host = &interface->altsetting[interface->act_altsetting];
if (iface_host->desc.bNumEndpoints != 2) {
- dbg("Unexpected desc.bNumEndpoints.");
+ err("%s: Unexpected desc.bNumEndpoints\n", __FUNCTION__);
retval = -ENODEV;
goto error;
}
-
+
ati_remote->endpoint_in = &(iface_host->endpoint[0].desc);
ati_remote->endpoint_out = &(iface_host->endpoint[1].desc);
ati_remote->udev = udev;
ati_remote->interface = interface;
if (!(ati_remote->endpoint_in->bEndpointAddress & 0x80)) {
- dbg("Unexpected endpoint_in->bEndpointAddress.");
+ err("%s: Unexpected endpoint_in->bEndpointAddress\n", __FUNCTION__);
retval = -ENODEV;
goto error;
}
if ((ati_remote->endpoint_in->bmAttributes & 3) != 3) {
- dbg("Unexpected endpoint_in->bmAttributes.");
+ err("%s: Unexpected endpoint_in->bmAttributes\n", __FUNCTION__);
retval = -ENODEV;
goto error;
}
if (ati_remote->endpoint_in->wMaxPacketSize == 0) {
- dbg("endpoint_in message size = 0?");
+ err("%s: endpoint_in message size==0? \n", __FUNCTION__);
retval = -ENODEV;
goto error;
}
if (!(buf = kmalloc(NAME_BUFSIZE, GFP_KERNEL)))
goto error;
-
+
/* Allocate URB buffers, URBs */
ati_remote->inbuf = usb_buffer_alloc(udev, DATA_BUFSIZE, SLAB_ATOMIC,
&ati_remote->inbuf_dma);
@@ -745,10 +761,11 @@
sprintf(ati_remote->name, "%s %s", ati_remote->name, buf);
if (!strlen(ati_remote->name))
- sprintf(ati_remote->name, "USB ATI (X10) remote %04x:%04x",
- ati_remote->idev.id.vendor, ati_remote->idev.id.product);
-
- /* Device Hardware Initialization */
+ sprintf(ati_remote->name, DRIVER_DESC "(%04x,%04x)",
+ ati_remote->udev->descriptor.idVendor,
+ ati_remote->udev->descriptor.idProduct);
+
+ /* Device Hardware Initialization - fills in ati_remote->idev from udev. */
retval = ati_remote_initialize(ati_remote);
if (retval)
goto error;
@@ -757,8 +774,8 @@
ati_remote_input_init(ati_remote);
input_register_device(&ati_remote->idev);
- info("Input registered: %s on %s", ati_remote->name, path);
- info("USB (bus:dev)=(%d:%d)", udev->bus->busnum, udev->devnum);
+ dev_info(&ati_remote->interface->dev, "Input registered: %s on %s\n",
+ ati_remote->name, path);
usb_set_intfdata(interface, ati_remote);
ati_remote->present = 1;
@@ -783,7 +800,7 @@
ati_remote = usb_get_intfdata(interface);
usb_set_intfdata(interface, NULL);
if (!ati_remote) {
- warn("%s - null device?", __FUNCTION__);
+ warn("%s - null device?\n", __FUNCTION__);
return;
}
@@ -806,9 +823,9 @@
result = usb_register(&ati_remote_driver);
if (result)
- err("usb_register error #%d", result);
+ err("usb_register error #%d\n", result);
else
- info("USB registered " DRIVER_DESC " ver. " DRIVER_VERSION);
+ info("Registered USB driver " DRIVER_DESC " v. " DRIVER_VERSION);
return result;
}
-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id70&alloc_id638&op=click
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
