I have been beating this GeneSys adaptor to death and have found out it appears to be a certain data sequence/packet that kills it.
Attached it a gzipped 1024 byte file. (It's gzipped just to add a crc to it, it's out of an .avi and incompressible)
By doing
zcat lockup.file.gz | dd of=/dev/sda
I can reliably lockup the drive.
It has sustained over 200gb of read/write from /dev/zero and 100gb from /dev/urandom. But send it this 1024 byte file and it times out almost every time.
I say almost as I can create a partition, mkdosfs -F32 /dev/sda1, mount -o sync /dev/sda1 /mnt/sda1
and then copy the file on and about 30% of the time it will timeout. But a dd to the first sector on the device locks it every time.
I have tried copying the file across in windows and it appears to work ok. I did get some error message once about failing to properly write the data but when I mounted the drive on the linux box it was there..
This is 100% reproducible on 2 systems with 2 different cardbus cards on my laptop.
Where to from here?
Regards, Brad
Syslog attached
Mar 18 18:09:02 bklaptop kernel: ehci_hcd 03:00.2: GetStatus port 1 status 001803 POWER sig=j CSC CONNECT
Mar 18 18:09:02 bklaptop kernel: hub.c: port 1, portstatus 501, change 1, 480 Mb/s
Mar 18 18:09:02 bklaptop kernel: hub.c: port 1 connection change
Mar 18 18:09:02 bklaptop kernel: hub.c: port 1, portstatus 501, change 1, 480 Mb/s
Mar 18 18:09:02 bklaptop kernel: hub.c: port 1, portstatus 501, change 0, 480 Mb/s
Mar 18 18:09:03 bklaptop last message repeated 3 times
Mar 18 18:09:03 bklaptop kernel: hub.c: port 1, portstatus 511, change 0, 480 Mb/s
Mar 18 18:09:03 bklaptop kernel: hub.c: port 1 of hub 1 not reset yet, waiting 10ms
Mar 18 18:09:03 bklaptop kernel: hub.c: port 1, portstatus 511, change 0, 480 Mb/s
Mar 18 18:09:03 bklaptop kernel: hub.c: port 1 of hub 1 not reset yet, waiting 10ms
Mar 18 18:09:03 bklaptop kernel: ehci_hcd 03:00.2: port 1 high speed
Mar 18 18:09:03 bklaptop kernel: ehci_hcd 03:00.2: GetStatus port 1 status 001005 POWER sig=se0 PE CONNECT
Mar 18 18:09:03 bklaptop kernel: hub.c: port 1, portstatus 503, change 10, 480 Mb/s
Mar 18 18:09:03 bklaptop kernel: hub.c: new USB device 03:00.2-1, assigned address 2
Mar 18 18:09:03 bklaptop kernel: usb.c: kmalloc IF dd9067a0, numif 1
Mar 18 18:09:03 bklaptop kernel: usb.c: descriptor data left
Mar 18 18:09:03 bklaptop kernel: usb.c: new device strings: Mfr=0, Product=1, SerialNumber=0
Mar 18 18:09:03 bklaptop kernel: usb.c: USB device number 2 default language ID 0x409
Mar 18 18:09:03 bklaptop kernel: Product: USB TO IDE
Mar 18 18:09:03 bklaptop kernel: usb.c: unhandled interfaces on device
Mar 18 18:09:03 bklaptop kernel: usb.c: USB device 2 (vend/prod 0x5e3/0x702) is not claimed by any active driver.
Mar 18 18:09:03 bklaptop kernel: Length = 18
Mar 18 18:09:03 bklaptop kernel: DescriptorType = 01
Mar 18 18:09:03 bklaptop kernel: USB version = 2.00
Mar 18 18:09:03 bklaptop kernel: Vendor:Product = 05e3:0702
Mar 18 18:09:03 bklaptop kernel: MaxPacketSize0 = 64
Mar 18 18:09:03 bklaptop kernel: NumConfigurations = 1
Mar 18 18:09:03 bklaptop kernel: Device version = 0.02
Mar 18 18:09:03 bklaptop kernel: Device Class:SubClass:Protocol = 00:00:00
Mar 18 18:09:03 bklaptop kernel: Per-interface classes
Mar 18 18:09:03 bklaptop kernel: Configuration:
Mar 18 18:09:03 bklaptop kernel: bLength = 9
Mar 18 18:09:03 bklaptop kernel: bDescriptorType = 02
Mar 18 18:09:03 bklaptop kernel: wTotalLength = 0021
Mar 18 18:09:03 bklaptop kernel: bNumInterfaces = 01
Mar 18 18:09:03 bklaptop kernel: bConfigurationValue = 01
Mar 18 18:09:03 bklaptop kernel: iConfiguration = 00
Mar 18 18:09:03 bklaptop kernel: bmAttributes = c0
Mar 18 18:09:03 bklaptop kernel: MaxPower = 96mA
Mar 18 18:09:03 bklaptop kernel:
Mar 18 18:09:03 bklaptop kernel: Interface: 0
Mar 18 18:09:03 bklaptop kernel: Alternate Setting: 0
Mar 18 18:09:03 bklaptop kernel: bLength = 9
Mar 18 18:09:03 bklaptop kernel: bDescriptorType = 04
Mar 18 18:09:03 bklaptop kernel: bInterfaceNumber = 00
Mar 18 18:09:03 bklaptop kernel: bAlternateSetting = 00
Mar 18 18:09:03 bklaptop kernel: bNumEndpoints = 02
Mar 18 18:09:03 bklaptop kernel: bInterface Class:SubClass:Protocol = 08:06:50
Mar 18 18:09:03 bklaptop kernel: iInterface = 00
Mar 18 18:09:03 bklaptop kernel: Endpoint:
Mar 18 18:09:03 bklaptop kernel: bLength = 7
Mar 18 18:09:03 bklaptop kernel: bDescriptorType = 05
Mar 18 18:09:03 bklaptop kernel: bEndpointAddress = 81 (in)
Mar 18 18:09:03 bklaptop kernel: bmAttributes = 02 (Bulk)
Mar 18 18:09:03 bklaptop kernel: wMaxPacketSize = 0200
Mar 18 18:09:03 bklaptop kernel: bInterval = 00
Mar 18 18:09:03 bklaptop kernel: Endpoint:
Mar 18 18:09:03 bklaptop kernel: bLength = 7
Mar 18 18:09:03 bklaptop kernel: bDescriptorType = 05
Mar 18 18:09:03 bklaptop kernel: bEndpointAddress = 02 (out)
Mar 18 18:09:03 bklaptop kernel: bmAttributes = 02 (Bulk)
Mar 18 18:09:03 bklaptop kernel: wMaxPacketSize = 0200
Mar 18 18:09:03 bklaptop kernel: bInterval = 00
Mar 18 18:09:03 bklaptop kernel: usb.c: kusbd: /sbin/hotplug add 2
Mar 18 18:09:03 bklaptop default.hotplug[1326]: arguments (usb) env (DEVFS=/proc/bus/usb OLDPWD=/ PATH=/bin:/sbin:/usr/sbin:/usr/bin ACTION=add PWD=/etc/hotplug HOME=/ SHLVL=2 DEVICE=/proc/bus/usb/004/002 INTERFACE=8/6/80
PRODUCT=5e3/702/2 TYPE=0/0/0 DEBUG=kernel _=/usr/bin/env)
Mar 18 18:09:03 bklaptop default.hotplug[1326]: invoke /etc/hotplug/usb.agent ()
Mar 18 18:09:03 bklaptop kernel: hub.c: port 2, portstatus 100, change 0, 12 Mb/s
Mar 18 18:09:03 bklaptop kernel: hub.c: port 3, portstatus 100, change 0, 12 Mb/s
Mar 18 18:09:03 bklaptop kernel: hub.c: port 4, portstatus 100, change 0, 12 Mb/s
Mar 18 18:09:03 bklaptop kernel: hub.c: port 5, portstatus 100, change 0, 12 Mb/s
Mar 18 18:09:06 bklaptop usb.agent[1326]: Setup usb-storage for USB product 5e3/702/2
Mar 18 18:09:06 bklaptop kernel: SCSI subsystem driver Revision: 1.00
Mar 18 18:09:06 bklaptop kernel: Initializing USB Mass Storage driver...
Mar 18 18:09:06 bklaptop kernel: usb.c: registered new driver usb-storage
Mar 18 18:09:06 bklaptop kernel: usb-storage: act_altsettting is 0
Mar 18 18:09:06 bklaptop kernel: usb-storage: id_index calculated to be: 89
Mar 18 18:09:06 bklaptop kernel: usb-storage: Array length appears to be: 91
Mar 18 18:09:06 bklaptop kernel: usb-storage: USB Mass Storage device detected
Mar 18 18:09:06 bklaptop kernel: usb-storage: Endpoints: In: 0xdec6a2e0 Out: 0xdec6a2f4 Int: 0x00000000 (Period 0)
Mar 18 18:09:06 bklaptop kernel: usb-storage: New GUID 05e307020000000000000000
Mar 18 18:09:06 bklaptop kernel: usb-storage: GetMaxLUN command result is 1, data is 0
Mar 18 18:09:06 bklaptop kernel: usb-storage: Transport: Bulk
Mar 18 18:09:06 bklaptop kernel: usb-storage: Protocol: Transparent SCSI
Mar 18 18:09:06 bklaptop kernel: usb-storage: *** thread sleeping.
Mar 18 18:09:06 bklaptop kernel: scsi0 : SCSI emulation for USB Mass Storage devices
Mar 18 18:09:06 bklaptop kernel: usb-storage: queuecommand() called
Mar 18 18:09:06 bklaptop kernel: usb-storage: *** thread awakened.
Mar 18 18:09:06 bklaptop kernel: usb-storage: Command INQUIRY (6 bytes)
Mar 18 18:09:06 bklaptop kernel: usb-storage: 12 00 00 00 ff 00 00 00 67 46 1f c0
Mar 18 18:09:06 bklaptop kernel: usb-storage: Bulk command S 0x43425355 T 0x1 Trg 0 LUN 0 L 255 F 128 CL 6
Mar 18 18:09:06 bklaptop kernel: usb-storage: Bulk command transfer result=0
Mar 18 18:09:06 bklaptop kernel: usb-storage: usb_stor_transfer_partial(): xfer 255 bytes
Mar 18 18:09:06 bklaptop kernel: usb-storage: usb_stor_bulk_msg() returned 0 xferred 36/255
Mar 18 18:09:06 bklaptop kernel: usb-storage: Bulk data transfer result 0x1
Mar 18 18:09:06 bklaptop kernel: usb-storage: Attempting to get CSW...
Mar 18 18:09:06 bklaptop kernel: usb-storage: Bulk status result = 0
Mar 18 18:09:06 bklaptop kernel: usb-storage: Bulk status Sig 0x53425355 T 0x1 R 0 Stat 0x0
Mar 18 18:09:06 bklaptop kernel: usb-storage: Fixing INQUIRY data to show SCSI rev 2 - was 0
Mar 18 18:09:06 bklaptop kernel: usb-storage: scsi cmd done, result=0x0
Mar 18 18:09:06 bklaptop kernel: usb-storage: *** thread sleeping.
Mar 18 18:09:06 bklaptop kernel: Vendor: WDC WD20 Model: 00JB-00DUA1 Rev: 0811
Mar 18 18:09:06 bklaptop kernel: Type: Direct-Access ANSI SCSI revision: 02
Mar 18 18:09:06 bklaptop kernel: usb-storage: queuecommand() called
Mar 18 18:09:06 bklaptop kernel: usb-storage: *** thread awakened.
Mar 18 18:09:06 bklaptop kernel: usb-storage: Bad target number (1/0)
Mar 18 18:09:06 bklaptop kernel: usb-storage: *** thread sleeping.
Mar 18 18:09:06 bklaptop kernel: usb-storage: queuecommand() called
Mar 18 18:09:06 bklaptop kernel: usb-storage: *** thread awakened.
Mar 18 18:09:06 bklaptop kernel: usb-storage: Bad target number (2/0)
Mar 18 18:09:06 bklaptop kernel: usb-storage: *** thread sleeping.
Mar 18 18:09:06 bklaptop kernel: usb-storage: queuecommand() called
Mar 18 18:09:06 bklaptop kernel: usb-storage: *** thread awakened.
Mar 18 18:09:06 bklaptop kernel: usb-storage: Bad target number (3/0)
Mar 18 18:09:06 bklaptop kernel: usb-storage: *** thread sleeping.
Mar 18 18:09:06 bklaptop kernel: usb-storage: queuecommand() called
Mar 18 18:09:06 bklaptop kernel: usb-storage: *** thread awakened.
Mar 18 18:09:06 bklaptop kernel: usb-storage: Bad target number (4/0)
Mar 18 18:09:06 bklaptop kernel: usb-storage: *** thread sleeping.
Mar 18 18:09:06 bklaptop kernel: usb-storage: queuecommand() called
Mar 18 18:09:06 bklaptop kernel: usb-storage: *** thread awakened.
Mar 18 18:09:06 bklaptop kernel: usb-storage: Bad target number (5/0)
Mar 18 18:09:06 bklaptop kernel: usb-storage: *** thread sleeping.
Mar 18 18:09:06 bklaptop kernel: usb-storage: queuecommand() called
Mar 18 18:09:06 bklaptop kernel: usb-storage: *** thread awakened.
Mar 18 18:09:06 bklaptop kernel: usb-storage: Bad target number (6/0)
Mar 18 18:09:06 bklaptop kernel: usb-storage: *** thread sleeping.
Mar 18 18:09:06 bklaptop kernel: usb-storage: queuecommand() called
Mar 18 18:09:06 bklaptop kernel: usb-storage: *** thread awakened.
Mar 18 18:09:06 bklaptop kernel: usb-storage: Bad target number (7/0)
Mar 18 18:09:06 bklaptop kernel: usb-storage: *** thread sleeping.
Mar 18 18:09:06 bklaptop kernel: WARNING: USB Mass Storage data integrity not assured
Mar 18 18:09:06 bklaptop kernel: USB Mass Storage device found at 2
Mar 18 18:09:06 bklaptop kernel: usb.c: usb-storage driver claimed interface dd9067a0
Mar 18 18:09:06 bklaptop kernel: USB Mass Storage support registered.
This is where I did my dd to /dev/sda
Mar 18 18:09:15 bklaptop kernel: Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
Mar 18 18:09:15 bklaptop kernel: usb-storage: queuecommand() called
Mar 18 18:09:15 bklaptop kernel: usb-storage: *** thread awakened.
Mar 18 18:09:15 bklaptop kernel: usb-storage: Command TEST_UNIT_READY (6 bytes)
Mar 18 18:09:15 bklaptop kernel: usb-storage: 00 00 00 00 00 00 00 00 00 00 97 e1
Mar 18 18:09:15 bklaptop kernel: usb-storage: Bulk command S 0x43425355 T 0x2 Trg 0 LUN 0 L 0 F 0 CL 6
Mar 18 18:09:15 bklaptop kernel: usb-storage: Bulk command transfer result=0
Mar 18 18:09:15 bklaptop kernel: usb-storage: Attempting to get CSW...
Mar 18 18:09:15 bklaptop kernel: usb-storage: Bulk status result = 0
Mar 18 18:09:15 bklaptop kernel: usb-storage: Bulk status Sig 0x53425355 T 0x2 R 0 Stat 0x0
Mar 18 18:09:15 bklaptop kernel: usb-storage: scsi cmd done, result=0x0
Mar 18 18:09:15 bklaptop kernel: usb-storage: *** thread sleeping.
Mar 18 18:09:15 bklaptop kernel: usb-storage: queuecommand() called
Mar 18 18:09:15 bklaptop kernel: usb-storage: *** thread awakened.
Mar 18 18:09:15 bklaptop kernel: usb-storage: Command READ_CAPACITY (10 bytes)
Mar 18 18:09:15 bklaptop kernel: usb-storage: 25 00 00 00 00 00 00 00 00 00 97 e1
Mar 18 18:09:15 bklaptop kernel: usb-storage: Bulk command S 0x43425355 T 0x3 Trg 0 LUN 0 L 8 F 128 CL 10
Mar 18 18:09:15 bklaptop kernel: usb-storage: Bulk command transfer result=0
Mar 18 18:09:15 bklaptop kernel: usb-storage: usb_stor_transfer_partial(): xfer 8 bytes
Mar 18 18:09:15 bklaptop kernel: usb-storage: usb_stor_bulk_msg() returned 0 xferred 8/8
Mar 18 18:09:15 bklaptop kernel: usb-storage: usb_stor_transfer_partial(): transfer complete
Mar 18 18:09:15 bklaptop kernel: usb-storage: Bulk data transfer result 0x0
Mar 18 18:09:15 bklaptop kernel: usb-storage: Attempting to get CSW...
Mar 18 18:09:15 bklaptop kernel: usb-storage: Bulk status result = 0
Mar 18 18:09:15 bklaptop kernel: usb-storage: Bulk status Sig 0x53425355 T 0x3 R 0 Stat 0x0
Mar 18 18:09:15 bklaptop kernel: usb-storage: scsi cmd done, result=0x0
Mar 18 18:09:15 bklaptop kernel: usb-storage: *** thread sleeping.
Mar 18 18:09:15 bklaptop kernel: SCSI device sda: 390622887 512-byte hdwr sectors (199999 MB)
Mar 18 18:09:15 bklaptop kernel: /dev/scsi/host0/bus0/target0/lun0:<7>usb-storage: queuecommand() called
Mar 18 18:09:15 bklaptop kernel: usb-storage: *** thread awakened.
Mar 18 18:09:15 bklaptop kernel: usb-storage: Command READ_10 (10 bytes)
Mar 18 18:09:15 bklaptop kernel: usb-storage: 28 00 00 00 00 00 00 00 08 00 97 e1
Mar 18 18:09:15 bklaptop kernel: usb-storage: Bulk command S 0x43425355 T 0x4 Trg 0 LUN 0 L 4096 F 128 CL 10
Mar 18 18:09:15 bklaptop kernel: usb-storage: Bulk command transfer result=0
Mar 18 18:09:15 bklaptop kernel: usb-storage: usb_stor_transfer_partial(): xfer 4096 bytes
Mar 18 18:09:15 bklaptop kernel: usb-storage: usb_stor_bulk_msg() returned 0 xferred 4096/4096
Mar 18 18:09:15 bklaptop kernel: usb-storage: usb_stor_transfer_partial(): transfer complete
Mar 18 18:09:15 bklaptop kernel: usb-storage: Bulk data transfer result 0x0
Mar 18 18:09:15 bklaptop kernel: usb-storage: Attempting to get CSW...
Mar 18 18:09:15 bklaptop kernel: usb-storage: Bulk status result = 0
Mar 18 18:09:15 bklaptop kernel: usb-storage: Bulk status Sig 0x53425355 T 0x4 R 0 Stat 0x0
Mar 18 18:09:15 bklaptop kernel: usb-storage: scsi cmd done, result=0x0
Mar 18 18:09:15 bklaptop kernel: usb-storage: *** thread sleeping.
Mar 18 18:09:15 bklaptop kernel: p1
Mar 18 18:09:15 bklaptop kernel: usb-storage: queuecommand() called
Mar 18 18:09:15 bklaptop kernel: usb-storage: *** thread awakened.
Mar 18 18:09:15 bklaptop kernel: usb-storage: Command READ_10 (10 bytes)
Mar 18 18:09:15 bklaptop kernel: usb-storage: 28 00 00 00 00 00 00 00 02 00 97 e1
Mar 18 18:09:15 bklaptop kernel: usb-storage: Bulk command S 0x43425355 T 0x5 Trg 0 LUN 0 L 1024 F 128 CL 10
Mar 18 18:09:15 bklaptop kernel: usb-storage: Bulk command transfer result=0
Mar 18 18:09:15 bklaptop kernel: usb-storage: usb_stor_transfer_partial(): xfer 1024 bytes
Mar 18 18:09:15 bklaptop kernel: usb-storage: usb_stor_bulk_msg() returned 0 xferred 1024/1024
Mar 18 18:09:15 bklaptop kernel: usb-storage: usb_stor_transfer_partial(): transfer complete
Mar 18 18:09:15 bklaptop kernel: usb-storage: Bulk data transfer result 0x0
Mar 18 18:09:15 bklaptop kernel: usb-storage: Attempting to get CSW...
Mar 18 18:09:15 bklaptop kernel: usb-storage: Bulk status result = 0
Mar 18 18:09:15 bklaptop kernel: usb-storage: Bulk status Sig 0x53425355 T 0x5 R 0 Stat 0x0
Mar 18 18:09:15 bklaptop kernel: usb-storage: scsi cmd done, result=0x0
Mar 18 18:09:15 bklaptop kernel: usb-storage: *** thread sleeping.
Mar 18 18:09:15 bklaptop kernel: usb-storage: queuecommand() called
Mar 18 18:09:15 bklaptop kernel: usb-storage: *** thread awakened.
Mar 18 18:09:15 bklaptop kernel: usb-storage: Command WRITE_10 (10 bytes)
Mar 18 18:09:15 bklaptop kernel: usb-storage: 2a 00 00 00 00 00 00 00 02 00 97 e1
Mar 18 18:09:15 bklaptop kernel: usb-storage: Bulk command S 0x43425355 T 0x6 Trg 0 LUN 0 L 1024 F 0 CL 10
Mar 18 18:09:15 bklaptop kernel: usb-storage: Bulk command transfer result=0
Mar 18 18:09:15 bklaptop kernel: usb-storage: usb_stor_transfer_partial(): xfer 1024 bytes
Mar 18 18:09:15 bklaptop kernel: usb-storage: usb_stor_bulk_msg() returned 0 xferred 1024/1024
Mar 18 18:09:15 bklaptop kernel: usb-storage: usb_stor_transfer_partial(): transfer complete
Mar 18 18:09:15 bklaptop kernel: usb-storage: Bulk data transfer result 0x0
Mar 18 18:09:15 bklaptop kernel: usb-storage: Attempting to get CSW...
Mar 18 18:09:45 bklaptop kernel: usb-storage: command_abort() called
Mar 18 18:09:45 bklaptop kernel: usb-storage: -- transport indicates command was aborted
Mar 18 18:09:45 bklaptop kernel: usb-storage: Bulk reset requested
Mar 18 18:09:50 bklaptop kernel: usb_control/bulk_msg: timeout
Mar 18 18:09:50 bklaptop kernel: usb-storage: Bulk soft reset failed -110
Mar 18 18:09:50 bklaptop kernel: usb-storage: scsi command aborted
Mar 18 18:09:50 bklaptop kernel: usb-storage: *** thread sleeping.
Mar 18 18:09:50 bklaptop kernel: usb-storage: queuecommand() called
Mar 18 18:09:50 bklaptop kernel: usb-storage: *** thread awakened.
Mar 18 18:09:50 bklaptop kernel: usb-storage: Command TEST_UNIT_READY (6 bytes)
Mar 18 18:09:50 bklaptop kernel: usb-storage: 00 00 00 00 00 00 00 00 02 00 97 e1
Mar 18 18:09:50 bklaptop kernel: usb-storage: Bulk command S 0x43425355 T 0x7 Trg 0 LUN 0 L 0 F 0 CL 6
Mar 18 18:09:50 bklaptop kernel: usb-storage: Bulk command transfer result=0
Mar 18 18:09:50 bklaptop kernel: usb-storage: Attempting to get CSW...
Mar 18 18:10:00 bklaptop kernel: usb-storage: command_abort() called
Mar 18 18:10:00 bklaptop kernel: usb-storage: -- transport indicates command was aborted
Mar 18 18:10:00 bklaptop kernel: usb-storage: Bulk reset requested
Mar 18 18:10:05 bklaptop kernel: usb_control/bulk_msg: timeout
Mar 18 18:10:05 bklaptop kernel: usb-storage: Bulk soft reset failed -110
Mar 18 18:10:05 bklaptop kernel: usb-storage: scsi command aborted
Mar 18 18:10:05 bklaptop kernel: usb-storage: *** thread sleeping.
Mar 18 18:10:05 bklaptop kernel: usb-storage: device_reset() called
Mar 18 18:10:05 bklaptop kernel: usb-storage: Bulk reset requested
Mar 18 18:10:10 bklaptop kernel: usb_control/bulk_msg: timeout
Mar 18 18:10:10 bklaptop kernel: usb-storage: Bulk soft reset failed -110
Mar 18 18:10:10 bklaptop kernel: usb-storage: bus_reset() called
Mar 18 18:10:10 bklaptop kernel: hub.c: port 1, portstatus 511, change 0, 480 Mb/s
Mar 18 18:10:10 bklaptop kernel: hub.c: port 1 of hub 1 not reset yet, waiting 10ms
Mar 18 18:10:10 bklaptop kernel: hub.c: port 1, portstatus 511, change 0, 480 Mb/s
Mar 18 18:10:10 bklaptop kernel: hub.c: port 1 of hub 1 not reset yet, waiting 10ms
Mar 18 18:10:10 bklaptop kernel: ehci_hcd 03:00.2: port 1 high speed
Mar 18 18:10:10 bklaptop kernel: ehci_hcd 03:00.2: GetStatus port 1 status 001005 POWER sig=se0 PE CONNECT
Mar 18 18:10:10 bklaptop kernel: hub.c: port 1, portstatus 503, change 10, 480 Mb/s
Mar 18 18:10:10 bklaptop kernel: usb.c: ignoring set_interface for dev 2, iface 0, alt 0
Mar 18 18:10:10 bklaptop kernel: usb-storage: Examinging driver usb-storage...skipping ourselves.
Mar 18 18:10:10 bklaptop kernel: usb-storage: bus_reset() complete
Mar 18 18:10:15 bklaptop kernel: usb-storage: queuecommand() called
Mar 18 18:10:15 bklaptop kernel: usb-storage: *** thread awakened.
Mar 18 18:10:15 bklaptop kernel: usb-storage: Command TEST_UNIT_READY (6 bytes)
Mar 18 18:10:15 bklaptop kernel: usb-storage: 00 00 00 00 00 00 00 00 02 00 97 e1
Mar 18 18:10:15 bklaptop kernel: usb-storage: Bulk command S 0x43425355 T 0x8 Trg 0 LUN 0 L 0 F 0 CL 6
Mar 18 18:10:15 bklaptop kernel: usb-storage: Bulk command transfer result=0
Mar 18 18:10:15 bklaptop kernel: usb-storage: Attempting to get CSW...
Mar 18 18:10:15 bklaptop kernel: usb-storage: Bulk status result = 0
Mar 18 18:10:15 bklaptop kernel: usb-storage: Bulk status Sig 0x53425355 T 0x8 R 0 Stat 0x0
Mar 18 18:10:15 bklaptop kernel: usb-storage: scsi cmd done, result=0x0
Mar 18 18:10:15 bklaptop kernel: usb-storage: *** thread sleeping.
Mar 18 18:10:15 bklaptop kernel: usb-storage: queuecommand() called
Mar 18 18:10:15 bklaptop kernel: usb-storage: *** thread awakened.
Mar 18 18:10:15 bklaptop kernel: usb-storage: Command WRITE_10 (10 bytes)
Mar 18 18:10:15 bklaptop kernel: usb-storage: 2a 00 00 00 00 00 00 00 02 00 97 e1
Mar 18 18:10:15 bklaptop kernel: usb-storage: Bulk command S 0x43425355 T 0x9 Trg 0 LUN 0 L 1024 F 0 CL 10
Mar 18 18:10:15 bklaptop kernel: usb-storage: Bulk command transfer result=0
Mar 18 18:10:15 bklaptop kernel: usb-storage: usb_stor_transfer_partial(): xfer 1024 bytes
Mar 18 18:10:15 bklaptop kernel: usb-storage: usb_stor_bulk_msg() returned 0 xferred 1024/1024
Mar 18 18:10:15 bklaptop kernel: usb-storage: usb_stor_transfer_partial(): transfer complete
Mar 18 18:10:15 bklaptop kernel: usb-storage: Bulk data transfer result 0x0
Mar 18 18:10:15 bklaptop kernel: usb-storage: Attempting to get CSW...
Mar 18 18:10:45 bklaptop kernel: usb-storage: command_abort() called
Mar 18 18:10:45 bklaptop kernel: usb-storage: -- transport indicates command was aborted
Mar 18 18:10:45 bklaptop kernel: usb-storage: Bulk reset requested
Mar 18 18:10:50 bklaptop kernel: usb_control/bulk_msg: timeout
Mar 18 18:10:50 bklaptop kernel: usb-storage: Bulk soft reset failed -110
Mar 18 18:10:50 bklaptop kernel: usb-storage: scsi command aborted
Mar 18 18:10:50 bklaptop kernel: usb-storage: *** thread sleeping.
Mar 18 18:10:50 bklaptop kernel: scsi: device set offline - not ready or command retry failed after bus reset: host 0 channel 0 id 0 lun 0
Mar 18 18:10:50 bklaptop kernel: SCSI disk error : host 0 channel 0 id 0 lun 0 return code = 50000
Mar 18 18:10:50 bklaptop kernel: I/O error: dev 08:00, sector 0
lockup.file.gz
Description: application/gzip
