Hi guys, I figured out you may want to read the followin logs:
Apr 1 19:43:17 d kernel: usb 1-2.1: new full speed USB device using address 8 Apr 1 19:43:17 d kernel: usb-storage: This device (07cf,1001,1000 S 05 P 01) has an unneeded Protocol entry in unusual_devs.h Apr 1 19:43:17 d kernel: Please send a copy of this message to <[EMAIL PROTECTED]> Apr 1 19:43:17 d kernel: scsi6 : SCSI emulation for USB Mass Storage devices Apr 1 19:43:17 d kernel: Vendor: Casio Model: QV DigitalCamera Rev: 1000 Apr 1 19:43:17 d kernel: Type: Direct-Access ANSI SCSI revision: 02 Apr 1 19:43:17 d kernel: SCSI device sde: 990976 512-byte hdwr sectors (507 MB) Apr 1 19:43:17 d kernel: sde: assuming Write Enabled Apr 1 19:43:17 d kernel: sde: assuming drive cache: write through Apr 1 19:43:18 d kernel: sde: sde1 Apr 1 19:43:18 d kernel: Attached scsi removable disk sde at scsi6, channel 0, id 0, lun 0 Apr 1 19:43:18 d kernel: Attached scsi generic sg6 at scsi6, channel 0, id 0, lun 0, type 0 Apr 1 19:43:18 d kernel: WARNING: USB Mass Storage data integrity not assured Apr 1 19:43:18 d kernel: USB Mass Storage device found at 8 also, note that I have a casio exilim ex-z4 with 512Mb SD card. take care, z *^_-* ------------------------------------------------------- This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
