On Thursday 15 April 2004 20:58, Alan Stern wrote:
>
> It is a big help.
>
> What happens when all the patches are applied and you try to use the
> Bluetooth device? Does it just stop doing anything and give timeouts?
I've applied the four patches and I've got the same problems, the same that I
have with 2.6.5-mm5.
> When that happens, copy the file /proc/driver/uhci/0000:00:10.1 and post
> the contents. Also, first make sure that you load the UHCI driver with
>
> modprobe uhci-hcd debug=3
>
I've did this 4 time with the same results, I've
used /proc/driver/uhci/0000:00:10.0 because /proc/driver/uhci/0000:00:10.1
gived the same result so probably the bluetooth device was connected to this.
Like test I've used #sdptool browse
I've taked 3 files: before the execution of the command, during and after.
Bye!
--
Simone Gotti
<[EMAIL PROTECTED]>
# cat /proc/driver/uhci/0000\:00\:10.0
HC status
usbcmd = 00c1 Maxp64 CF RS
usbstat = 0000
usbint = 000f
usbfrnum = (1)8cc
flbaseadd = 0cefc000
sof = 40
stat1 = 0480 OverCurrent
stat2 = 0495 OverCurrent Enabled Connected
Frame List
Skeleton QH's
- skel_int128_qh
[ce46f000] link (0e46f152) element (00000001)
urbp == NULL
- skel_int64_qh
[ce46f030] link (0e46f152) element (00000001)
urbp == NULL
- skel_int32_qh
[ce46f060] link (0e46f152) element (00000001)
urbp == NULL
- skel_int16_qh
[ce46f090] link (0e46f152) element (00000001)
urbp == NULL
- skel_int8_qh
[ce46f0c0] link (0e46f152) element (00000001)
urbp == NULL
- skel_int4_qh
[ce46f0f0] link (0e46f152) element (00000001)
urbp == NULL
- skel_int2_qh
[ce46f120] link (0e46f152) element (00000001)
urbp == NULL
- skel_int1_qh
[ce46f150] link (0e46f2a2) element (00000001)
urbp == NULL
[ce46f2a0] link (0e46f182) element (0e46d0c0)
0: [ce46d0c0] link (00000001) e3 IOC Active NAK Length=7ff MaxLen=f DT1 EndPt=1
Dev=2, PID=69(IN) (buf=06cd533c)
- skel_ls_control_qh
[ce46f180] link (0e46f1b2) element (00000001)
urbp == NULL
- skel_fs_control_qh
[ce46f1b0] link (0e46f1e2) element (00000001)
urbp == NULL
- skel_bulk_qh
[ce46f1e0] link (0e46f242) element (00000001)
urbp == NULL
[ce46f240] link (0e46f212) element (0e46d040)
0: [ce46d040] link (0e46d500) e3 SPD Active NAK Length=7ff MaxLen=3f DT1 EndPt=2
Dev=2, PID=69(IN) (buf=01f7ac50)
1: [ce46d500] link (0e46d540) e3 SPD Active Length=0 MaxLen=3f DT0 EndPt=2
Dev=2, PID=69(IN) (buf=01f7ac90)
2: [ce46d540] link (0e46d580) e3 SPD Active Length=0 MaxLen=3f DT1 EndPt=2
Dev=2, PID=69(IN) (buf=01f7acd0)
3: [ce46d580] link (0e46d5c0) e3 SPD Active Length=0 MaxLen=3f DT0 EndPt=2
Dev=2, PID=69(IN) (buf=01f7ad10)
4: [ce46d5c0] link (0e46d604) e3 SPD Active Length=0 MaxLen=3f DT1 EndPt=2
Dev=2, PID=69(IN) (buf=01f7ad50)
5: [ce46d600] link (0e46d640) e3 SPD Active Length=0 MaxLen=3f DT0 EndPt=2
Dev=2, PID=69(IN) (buf=01f7ad90)
6: [ce46d640] link (0e46d680) e3 SPD Active Length=0 MaxLen=3f DT1 EndPt=2
Dev=2, PID=69(IN) (buf=01f7add0)
7: [ce46d680] link (0e46d6c0) e3 SPD Active Length=0 MaxLen=3f DT0 EndPt=2
Dev=2, PID=69(IN) (buf=01f7ae10)
8: [ce46d6c0] link (0e46d700) e3 SPD Active Length=0 MaxLen=3f DT1 EndPt=2
Dev=2, PID=69(IN) (buf=01f7ae50)
9: [ce46d700] link (0e46d744) e3 SPD Active Length=0 MaxLen=3f DT0 EndPt=2
Dev=2, PID=69(IN) (buf=01f7ae90)
10: [ce46d740] link (0e46d780) e3 SPD Active Length=0 MaxLen=3f DT1 EndPt=2
Dev=2, PID=69(IN) (buf=01f7aed0)
11: [ce46d780] link (0e46d7c0) e3 SPD Active Length=0 MaxLen=3f DT0 EndPt=2
Dev=2, PID=69(IN) (buf=01f7af10)
12: [ce46d7c0] link (0e46d800) e3 SPD Active Length=0 MaxLen=3f DT1 EndPt=2
Dev=2, PID=69(IN) (buf=01f7af50)
13: [ce46d800] link (0e46d840) e3 SPD Active Length=0 MaxLen=3f DT0 EndPt=2
Dev=2, PID=69(IN) (buf=01f7af90)
14: [ce46d840] link (0e46d884) e3 SPD Active Length=0 MaxLen=3f DT1 EndPt=2
Dev=2, PID=69(IN) (buf=01f7afd0)
15: [ce46d880] link (0e46d8c0) e3 SPD Active Length=0 MaxLen=3f DT0 EndPt=2
Dev=2, PID=69(IN) (buf=01f7b010)
16: [ce46d8c0] link (00000001) e3 IOC Active Length=0 MaxLen=3 DT1 EndPt=2
Dev=2, PID=69(IN) (buf=01f7b050)
- skel_term_qh
[ce46f210] link (00000001) element (0e46d000)
urbp == NULL
Main list URBs:
1: urb_priv [c06d8454] urb [c6e77a24] qh [ce46f240] Dev=2 EP=2(IN) BLK FSBR_TO
TDs=17 queued URBs=0
2: urb_priv [c06d841c] urb [cf126420] qh [ce46f300] Dev=2 EP=2(OUT) BLK FSBR_TO
TDs=1 queued
3: urb_priv [c06d8534] urb [cf126d6c] qh [ce46f270] Dev=2 EP=2(OUT) BLK FSBR_TO
TDs=1 queued
4: urb_priv [c06d848c] urb [c6e77bc8] qh [ce46f2a0] Dev=2 EP=1(IN) INT TDs=1 queued
URBs=0
Remove list URBs: Empty
Complete list URBs: Empty
# cat /proc/driver/uhci/0000\:00\:10.0
HC status
usbcmd = 00c1 Maxp64 CF RS
usbstat = 0000
usbint = 000f
usbfrnum = (1)27c
flbaseadd = 0cefc000
sof = 40
stat1 = 0480 OverCurrent
stat2 = 0495 OverCurrent Enabled Connected
Frame List
Skeleton QH's
- skel_int128_qh
[ce46f000] link (0e46f152) element (00000001)
urbp == NULL
- skel_int64_qh
[ce46f030] link (0e46f152) element (00000001)
urbp == NULL
- skel_int32_qh
[ce46f060] link (0e46f152) element (00000001)
urbp == NULL
- skel_int16_qh
[ce46f090] link (0e46f152) element (00000001)
urbp == NULL
- skel_int8_qh
[ce46f0c0] link (0e46f152) element (00000001)
urbp == NULL
- skel_int4_qh
[ce46f0f0] link (0e46f152) element (00000001)
urbp == NULL
- skel_int2_qh
[ce46f120] link (0e46f152) element (00000001)
urbp == NULL
- skel_int1_qh
[ce46f150] link (0e46f2a2) element (00000001)
urbp == NULL
[ce46f2a0] link (0e46f182) element (0e46d4c0)
0: [ce46d4c0] link (00000001) e3 IOC Active NAK Length=7ff MaxLen=f DT1 EndPt=1
Dev=2, PID=69(IN) (buf=06cd533c)
- skel_ls_control_qh
[ce46f180] link (0e46f1b2) element (00000001)
urbp == NULL
- skel_fs_control_qh
[ce46f1b0] link (0e46f1e2) element (00000001)
urbp == NULL
- skel_bulk_qh
[ce46f1e0] link (0e46f272) element (00000001)
urbp == NULL
[ce46f270] link (0e46f212) element (0e46d080)
0: [ce46d080] link (0e46d0c0) e3 SPD Active NAK Length=7ff MaxLen=3f DT0 EndPt=2
Dev=2, PID=69(IN) (buf=01f7ac50)
1: [ce46d0c0] link (0e46d100) e3 SPD Active Length=0 MaxLen=3f DT1 EndPt=2
Dev=2, PID=69(IN) (buf=01f7ac90)
2: [ce46d100] link (0e46d140) e3 SPD Active Length=0 MaxLen=3f DT0 EndPt=2
Dev=2, PID=69(IN) (buf=01f7acd0)
3: [ce46d140] link (0e46d180) e3 SPD Active Length=0 MaxLen=3f DT1 EndPt=2
Dev=2, PID=69(IN) (buf=01f7ad10)
4: [ce46d180] link (0e46d1c4) e3 SPD Active Length=0 MaxLen=3f DT0 EndPt=2
Dev=2, PID=69(IN) (buf=01f7ad50)
5: [ce46d1c0] link (0e46d200) e3 SPD Active Length=0 MaxLen=3f DT1 EndPt=2
Dev=2, PID=69(IN) (buf=01f7ad90)
6: [ce46d200] link (0e46d240) e3 SPD Active Length=0 MaxLen=3f DT0 EndPt=2
Dev=2, PID=69(IN) (buf=01f7add0)
7: [ce46d240] link (0e46d280) e3 SPD Active Length=0 MaxLen=3f DT1 EndPt=2
Dev=2, PID=69(IN) (buf=01f7ae10)
8: [ce46d280] link (0e46d2c0) e3 SPD Active Length=0 MaxLen=3f DT0 EndPt=2
Dev=2, PID=69(IN) (buf=01f7ae50)
9: [ce46d2c0] link (0e46d304) e3 SPD Active Length=0 MaxLen=3f DT1 EndPt=2
Dev=2, PID=69(IN) (buf=01f7ae90)
10: [ce46d300] link (0e46d340) e3 SPD Active Length=0 MaxLen=3f DT0 EndPt=2
Dev=2, PID=69(IN) (buf=01f7aed0)
11: [ce46d340] link (0e46d380) e3 SPD Active Length=0 MaxLen=3f DT1 EndPt=2
Dev=2, PID=69(IN) (buf=01f7af10)
12: [ce46d380] link (0e46d3c0) e3 SPD Active Length=0 MaxLen=3f DT0 EndPt=2
Dev=2, PID=69(IN) (buf=01f7af50)
13: [ce46d3c0] link (0e46d400) e3 SPD Active Length=0 MaxLen=3f DT1 EndPt=2
Dev=2, PID=69(IN) (buf=01f7af90)
14: [ce46d400] link (0e46d444) e3 SPD Active Length=0 MaxLen=3f DT0 EndPt=2
Dev=2, PID=69(IN) (buf=01f7afd0)
15: [ce46d440] link (0e46d480) e3 SPD Active Length=0 MaxLen=3f DT1 EndPt=2
Dev=2, PID=69(IN) (buf=01f7b010)
16: [ce46d480] link (00000001) e3 IOC Active Length=0 MaxLen=3 DT0 EndPt=2
Dev=2, PID=69(IN) (buf=01f7b050)
- skel_term_qh
[ce46f210] link (00000001) element (0e46d000)
urbp == NULL
Main list URBs:
1: urb_priv [c06d8454] urb [c6e77a24] qh [ce46f270] Dev=2 EP=2(IN) BLK FSBR_TO
TDs=17 queued URBs=0
2: urb_priv [c06d848c] urb [c6e77bc8] qh [ce46f2a0] Dev=2 EP=1(IN) INT TDs=1 queued
URBs=0
Remove list URBs: Empty
Complete list URBs: Empty
# cat /proc/driver/uhci/0000\:00\:10.0
HC status
usbcmd = 00c1 Maxp64 CF RS
usbstat = 0000
usbint = 000f
usbfrnum = (1)f74
flbaseadd = 0cefc000
sof = 40
stat1 = 0480 OverCurrent
stat2 = 0495 OverCurrent Enabled Connected
Frame List
Skeleton QH's
- skel_int128_qh
[ce46f000] link (0e46f152) element (00000001)
urbp == NULL
- skel_int64_qh
[ce46f030] link (0e46f152) element (00000001)
urbp == NULL
- skel_int32_qh
[ce46f060] link (0e46f152) element (00000001)
urbp == NULL
- skel_int16_qh
[ce46f090] link (0e46f152) element (00000001)
urbp == NULL
- skel_int8_qh
[ce46f0c0] link (0e46f152) element (00000001)
urbp == NULL
- skel_int4_qh
[ce46f0f0] link (0e46f152) element (00000001)
urbp == NULL
- skel_int2_qh
[ce46f120] link (0e46f152) element (00000001)
urbp == NULL
- skel_int1_qh
[ce46f150] link (0e46f2a2) element (00000001)
urbp == NULL
[ce46f2a0] link (0e46f182) element (0e46d0c0)
0: [ce46d0c0] link (00000001) e3 IOC Active NAK Length=7ff MaxLen=f DT1 EndPt=1
Dev=2, PID=69(IN) (buf=06cd533c)
- skel_ls_control_qh
[ce46f180] link (0e46f1b2) element (00000001)
urbp == NULL
- skel_fs_control_qh
[ce46f1b0] link (0e46f1e2) element (00000001)
urbp == NULL
- skel_bulk_qh
[ce46f1e0] link (0e46f242) element (00000001)
urbp == NULL
[ce46f240] link (0e46f212) element (0e46d040)
0: [ce46d040] link (0e46d500) e3 SPD Active NAK Length=7ff MaxLen=3f DT1 EndPt=2
Dev=2, PID=69(IN) (buf=01f7ac50)
1: [ce46d500] link (0e46d540) e3 SPD Active Length=0 MaxLen=3f DT0 EndPt=2
Dev=2, PID=69(IN) (buf=01f7ac90)
2: [ce46d540] link (0e46d580) e3 SPD Active Length=0 MaxLen=3f DT1 EndPt=2
Dev=2, PID=69(IN) (buf=01f7acd0)
3: [ce46d580] link (0e46d5c0) e3 SPD Active Length=0 MaxLen=3f DT0 EndPt=2
Dev=2, PID=69(IN) (buf=01f7ad10)
4: [ce46d5c0] link (0e46d604) e3 SPD Active Length=0 MaxLen=3f DT1 EndPt=2
Dev=2, PID=69(IN) (buf=01f7ad50)
5: [ce46d600] link (0e46d640) e3 SPD Active Length=0 MaxLen=3f DT0 EndPt=2
Dev=2, PID=69(IN) (buf=01f7ad90)
6: [ce46d640] link (0e46d680) e3 SPD Active Length=0 MaxLen=3f DT1 EndPt=2
Dev=2, PID=69(IN) (buf=01f7add0)
7: [ce46d680] link (0e46d6c0) e3 SPD Active Length=0 MaxLen=3f DT0 EndPt=2
Dev=2, PID=69(IN) (buf=01f7ae10)
8: [ce46d6c0] link (0e46d700) e3 SPD Active Length=0 MaxLen=3f DT1 EndPt=2
Dev=2, PID=69(IN) (buf=01f7ae50)
9: [ce46d700] link (0e46d744) e3 SPD Active Length=0 MaxLen=3f DT0 EndPt=2
Dev=2, PID=69(IN) (buf=01f7ae90)
10: [ce46d740] link (0e46d780) e3 SPD Active Length=0 MaxLen=3f DT1 EndPt=2
Dev=2, PID=69(IN) (buf=01f7aed0)
11: [ce46d780] link (0e46d7c0) e3 SPD Active Length=0 MaxLen=3f DT0 EndPt=2
Dev=2, PID=69(IN) (buf=01f7af10)
12: [ce46d7c0] link (0e46d800) e3 SPD Active Length=0 MaxLen=3f DT1 EndPt=2
Dev=2, PID=69(IN) (buf=01f7af50)
13: [ce46d800] link (0e46d840) e3 SPD Active Length=0 MaxLen=3f DT0 EndPt=2
Dev=2, PID=69(IN) (buf=01f7af90)
14: [ce46d840] link (0e46d884) e3 SPD Active Length=0 MaxLen=3f DT1 EndPt=2
Dev=2, PID=69(IN) (buf=01f7afd0)
15: [ce46d880] link (0e46d8c0) e3 SPD Active Length=0 MaxLen=3f DT0 EndPt=2
Dev=2, PID=69(IN) (buf=01f7b010)
16: [ce46d8c0] link (00000001) e3 IOC Active Length=0 MaxLen=3 DT1 EndPt=2
Dev=2, PID=69(IN) (buf=01f7b050)
- skel_term_qh
[ce46f210] link (00000001) element (0e46d000)
urbp == NULL
Main list URBs:
1: urb_priv [c06d8454] urb [c6e77a24] qh [ce46f240] Dev=2 EP=2(IN) BLK FSBR_TO
TDs=17 queued URBs=0
2: urb_priv [c06d841c] urb [cf126420] qh [ce46f300] Dev=2 EP=2(OUT) BLK FSBR_TO
TDs=1 queued
3: urb_priv [c06d848c] urb [c6e77bc8] qh [ce46f2a0] Dev=2 EP=1(IN) INT TDs=1 queued
URBs=0
Remove list URBs: Empty
Complete list URBs: Empty
