the actual endpoint number of a hub's "status change endpoint"?
from the 2.0 usb spec -
11.12.1 Endpoint Organization -
The Hub Class defines one additional endpoint beyond Default Control
Pipe, which is required for all hubs:
the Status Change endpoint. The host system receives port and hub
status change notifications through the
Status Change endpoint. The Status Change endpoint is an interrupt
endpoint.
So what endpoint number is this? Do I have to open an endpoint after the
hub receives its non-zero usb
device address? Since the status change endpoint is an 'interrupt'
endpoint type I assume its not the
same as the default endpoint 0 since its a control endpoint type.
Thanks.
-------------------------------------------------------
This SF.net email is sponsored by: The Robotic Monkeys at ThinkGeek
For a limited time only, get FREE Ground shipping on all orders of $35
or more. Hurry up and shop folks, this offer expires April 30th!
http://www.thinkgeek.com/freeshipping/?cpg=12297
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
