This is my personal pet peeve, because I own an MCT U232/U9.
The current driver in 2.4 is practically unusable, especially
if you try to run getty on it. The patch backports the 2.6 version.
-- Pete
diff -urp -X dontdiff linux-2.4.27-pre2/drivers/usb/serial/mct_u232.c
linux-2.4.27-pre2-usb/drivers/usb/serial/mct_u232.c
--- linux-2.4.27-pre2/drivers/usb/serial/mct_u232.c 2004-02-26 14:09:59.000000000
-0800
+++ linux-2.4.27-pre2-usb/drivers/usb/serial/mct_u232.c 2004-05-15 23:06:11.000000000
-0700
@@ -169,7 +169,8 @@ static struct usb_serial_device_type mct
struct mct_u232_private {
- unsigned long control_state; /* Modem Line Setting (TIOCM) */
+ spinlock_t lock;
+ unsigned int control_state; /* Modem Line Setting (TIOCM) */
unsigned char last_lcr; /* Line Control Register */
unsigned char last_lsr; /* Line Status Register */
unsigned char last_msr; /* Modem Status Register */
@@ -181,25 +182,49 @@ struct mct_u232_private {
#define WDR_TIMEOUT (HZ * 5 ) /* default urb timeout */
+/*
+ * Later day 2.6.0-test kernels have new baud rates like B230400 which
+ * we do not know how to support. We ignore them for the moment.
+ * XXX Rate-limit the error message, it's user triggerable.
+ */
static int mct_u232_calculate_baud_rate(struct usb_serial *serial, int value) {
if (serial->dev->descriptor.idProduct == MCT_U232_SITECOM_PID
|| serial->dev->descriptor.idProduct == MCT_U232_BELKIN_F5U109_PID) {
switch (value) {
- case 300: return 0x01;
- case 600: return 0x02; /* this one not tested */
- case 1200: return 0x03;
- case 2400: return 0x04;
- case 4800: return 0x06;
- case 9600: return 0x08;
- case 19200: return 0x09;
- case 38400: return 0x0a;
- case 57600: return 0x0b;
- case 115200: return 0x0c;
- default: return -1; /* normally not reached */
+ case B300: return 0x01;
+ case B600: return 0x02; /* this one not tested */
+ case B1200: return 0x03;
+ case B2400: return 0x04;
+ case B4800: return 0x06;
+ case B9600: return 0x08;
+ case B19200: return 0x09;
+ case B38400: return 0x0a;
+ case B57600: return 0x0b;
+ case B115200: return 0x0c;
+ default:
+ err("MCT USB-RS232: unsupported baudrate request 0x%x,"
+ " using default of B9600", value);
+ return 0x08;
+ }
+ } else {
+ switch (value) {
+ case B300: value = 300;
+ case B600: value = 600;
+ case B1200: value = 1200;
+ case B2400: value = 2400;
+ case B4800: value = 4800;
+ case B9600: value = 9600;
+ case B19200: value = 19200;
+ case B38400: value = 38400;
+ case B57600: value = 57600;
+ case B115200: value = 115200;
+ default:
+ err("MCT USB-RS232: unsupported baudrate request 0x%x,"
+ " using default of B9600", value);
+ value = 9600;
}
+ return 115200/value;
}
- else
- return MCT_U232_BAUD_RATE(value);
}
static int mct_u232_set_baud_rate(struct usb_serial *serial, int value)
@@ -207,7 +232,9 @@ static int mct_u232_set_baud_rate(struct
unsigned int divisor;
int rc;
unsigned char zero_byte = 0;
+
divisor = cpu_to_le32(mct_u232_calculate_baud_rate(serial, value));
+
rc = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
MCT_U232_SET_BAUD_RATE_REQUEST,
MCT_U232_SET_REQUEST_TYPE,
@@ -215,7 +242,7 @@ static int mct_u232_set_baud_rate(struct
WDR_TIMEOUT);
if (rc < 0)
err("Set BAUD RATE %d failed (error = %d)", value, rc);
- dbg("set_baud_rate: value: %d, divisor: 0x%x", value, divisor);
+ dbg("set_baud_rate: value: 0x%x, divisor: 0x%x", value, divisor);
/* Mimic the MCT-supplied Windows driver (version 1.21P.0104), which
always sends two extra USB 'device request' messages after the
@@ -263,7 +290,7 @@ static int mct_u232_set_line_ctrl(struct
} /* mct_u232_set_line_ctrl */
static int mct_u232_set_modem_ctrl(struct usb_serial *serial,
- unsigned long control_state)
+ unsigned int control_state)
{
int rc;
unsigned char mcr = MCT_U232_MCR_NONE;
@@ -280,7 +307,7 @@ static int mct_u232_set_modem_ctrl(struc
WDR_TIMEOUT);
if (rc < 0)
err("Set MODEM CTRL 0x%x failed (error = %d)", mcr, rc);
- dbg("set_modem_ctrl: state=0x%lx ==> mcr=0x%x", control_state, mcr);
+ dbg("set_modem_ctrl: state=0x%x ==> mcr=0x%x", control_state, mcr);
return rc;
} /* mct_u232_set_modem_ctrl */
@@ -301,7 +328,7 @@ static int mct_u232_get_modem_stat(struc
return rc;
} /* mct_u232_get_modem_stat */
-static void mct_u232_msr_to_state(unsigned long *control_state, unsigned char msr)
+static void mct_u232_msr_to_state(unsigned int *control_state, unsigned char msr)
{
/* Translate Control Line states */
if (msr & MCT_U232_MSR_DSR)
@@ -320,7 +347,7 @@ static void mct_u232_msr_to_state(unsign
*control_state |= TIOCM_CD;
else
*control_state &= ~TIOCM_CD;
- dbg("msr_to_state: msr=0x%x ==> state=0x%lx", msr, *control_state);
+ dbg("msr_to_state: msr=0x%x ==> state=0x%x", msr, *control_state);
} /* mct_u232_msr_to_state */
/*
@@ -330,20 +357,32 @@ static void mct_u232_msr_to_state(unsign
static int mct_u232_startup (struct usb_serial *serial)
{
struct mct_u232_private *priv;
+ struct usb_serial_port *port, *rport;
/* allocate the private data structure */
- serial->port->private = kmalloc(sizeof(struct mct_u232_private),
- GFP_KERNEL);
- if (!serial->port->private)
- return (-1); /* error */
- priv = (struct mct_u232_private *)serial->port->private;
+ priv = kmalloc(sizeof(struct mct_u232_private), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
/* set initial values for control structures */
+ spin_lock_init(&priv->lock);
priv->control_state = 0;
priv->last_lsr = 0;
priv->last_msr = 0;
-
+ serial->port->private = priv;
+
init_waitqueue_head(&serial->port->write_wait);
-
+
+ /* Puh, that's dirty */
+ port = &serial->port[0];
+ rport = &serial->port[1];
+ if (port->read_urb) {
+ /* No unlinking, it wasn't submitted yet. */
+ usb_free_urb(port->read_urb);
+ }
+ port->read_urb = rport->interrupt_in_urb;
+ rport->interrupt_in_urb = NULL;
+ port->read_urb->context = port;
+
return (0);
} /* mct_u232_startup */
@@ -354,7 +393,6 @@ static void mct_u232_shutdown (struct us
dbg("%s", __FUNCTION__);
- /* stop reads and writes on all ports */
for (i=0; i < serial->num_ports; ++i) {
/* My special items, the standard routines free my urbs */
if (serial->port[i].private)
@@ -367,6 +405,10 @@ static int mct_u232_open (struct usb_se
struct usb_serial *serial = port->serial;
struct mct_u232_private *priv = (struct mct_u232_private *)port->private;
int retval = 0;
+ unsigned int control_state;
+ unsigned long flags;
+ unsigned char last_lcr;
+ unsigned char last_msr;
dbg("%s port %d", __FUNCTION__, port->number);
@@ -383,29 +425,27 @@ static int mct_u232_open (struct usb_se
* sure if this is really necessary. But it should not harm
* either.
*/
+ spin_lock_irqsave(&priv->lock, flags);
if (port->tty->termios->c_cflag & CBAUD)
priv->control_state = TIOCM_DTR | TIOCM_RTS;
else
priv->control_state = 0;
- mct_u232_set_modem_ctrl(serial, priv->control_state);
priv->last_lcr = (MCT_U232_DATA_BITS_8 |
MCT_U232_PARITY_NONE |
MCT_U232_STOP_BITS_1);
- mct_u232_set_line_ctrl(serial, priv->last_lcr);
+ control_state = priv->control_state;
+ last_lcr = priv->last_lcr;
+ spin_unlock_irqrestore(&priv->lock, flags);
+ mct_u232_set_modem_ctrl(serial, control_state);
+ mct_u232_set_line_ctrl(serial, last_lcr);
/* Read modem status and update control state */
- mct_u232_get_modem_stat(serial, &priv->last_msr);
+ mct_u232_get_modem_stat(serial, &last_msr);
+ spin_lock_irqsave(&priv->lock, flags);
+ priv->last_msr = last_msr;
mct_u232_msr_to_state(&priv->control_state, priv->last_msr);
-
- {
- /* Puh, that's dirty */
- struct usb_serial_port *rport;
- rport = &serial->port[1];
- rport->tty = port->tty;
- rport->private = port->private;
- port->read_urb = rport->interrupt_in_urb;
- }
+ spin_unlock_irqrestore(&priv->lock, flags);
port->read_urb->dev = port->serial->dev;
retval = usb_submit_urb(port->read_urb);
@@ -551,6 +591,7 @@ static void mct_u232_read_int_callback (
struct usb_serial *serial = port->serial;
struct tty_struct *tty;
unsigned char *data = urb->transfer_buffer;
+ unsigned long flags;
dbg("%s - port %d", __FUNCTION__, port->number);
@@ -587,6 +628,7 @@ static void mct_u232_read_int_callback (
* The interrupt-in pipe signals exceptional conditions (modem line
* signal changes and errors). data[0] holds MSR, data[1] holds LSR.
*/
+ spin_lock_irqsave(&priv->lock, flags);
priv->last_msr = data[MCT_U232_MSR_INDEX];
/* Record Control Line states */
@@ -617,6 +659,7 @@ static void mct_u232_read_int_callback (
}
}
#endif
+ spin_unlock_irqrestore(&priv->lock, flags);
/* INT urbs are automatically re-submitted */
} /* mct_u232_read_int_callback */
@@ -628,125 +671,113 @@ static void mct_u232_set_termios (struct
struct usb_serial *serial = port->serial;
struct mct_u232_private *priv = (struct mct_u232_private *)port->private;
unsigned int iflag = port->tty->termios->c_iflag;
- unsigned int old_iflag = old_termios->c_iflag;
unsigned int cflag = port->tty->termios->c_cflag;
unsigned int old_cflag = old_termios->c_cflag;
-
+ unsigned long flags;
+ unsigned int control_state, new_state;
+ unsigned char last_lcr;
+
+ /* get a local copy of the current port settings */
+ spin_lock_irqsave(&priv->lock, flags);
+ control_state = priv->control_state;
+ spin_unlock_irqrestore(&priv->lock, flags);
+ last_lcr = 0;
+
/*
- * Update baud rate
+ * Update baud rate.
+ * Do not attempt to cache old rates and skip settings,
+ * disconnects screw such tricks up completely.
+ * Premature optimization is the root of all evil.
*/
- if( (cflag & CBAUD) != (old_cflag & CBAUD) ) {
- /* reassert DTR and (maybe) RTS on transition from B0 */
- if( (old_cflag & CBAUD) == B0 ) {
- dbg("%s: baud was B0", __FUNCTION__);
- priv->control_state |= TIOCM_DTR;
- /* don't set RTS if using hardware flow control */
- if (!(old_cflag & CRTSCTS)) {
- priv->control_state |= TIOCM_RTS;
- }
- mct_u232_set_modem_ctrl(serial, priv->control_state);
- }
-
- switch(cflag & CBAUD) {
- case B0: /* handled below */
- break;
- case B300: mct_u232_set_baud_rate(serial, 300);
- break;
- case B600: mct_u232_set_baud_rate(serial, 600);
- break;
- case B1200: mct_u232_set_baud_rate(serial, 1200);
- break;
- case B2400: mct_u232_set_baud_rate(serial, 2400);
- break;
- case B4800: mct_u232_set_baud_rate(serial, 4800);
- break;
- case B9600: mct_u232_set_baud_rate(serial, 9600);
- break;
- case B19200: mct_u232_set_baud_rate(serial, 19200);
- break;
- case B38400: mct_u232_set_baud_rate(serial, 38400);
- break;
- case B57600: mct_u232_set_baud_rate(serial, 57600);
- break;
- case B115200: mct_u232_set_baud_rate(serial, 115200);
- break;
- default: err("MCT USB-RS232 converter: unsupported baudrate request,
using default of 9600");
- mct_u232_set_baud_rate(serial, 9600); break;
- }
- if ((cflag & CBAUD) == B0 ) {
- dbg("%s: baud is B0", __FUNCTION__);
- /* Drop RTS and DTR */
- priv->control_state &= ~(TIOCM_DTR | TIOCM_RTS);
- mct_u232_set_modem_ctrl(serial, priv->control_state);
- }
+
+ /* reassert DTR and (maybe) RTS on transition from B0 */
+ if ((old_cflag & CBAUD) == B0) {
+ dbg("%s: baud was B0", __FUNCTION__);
+ control_state |= TIOCM_DTR;
+ /* don't set RTS if using hardware flow control */
+ if (!(old_cflag & CRTSCTS)) {
+ control_state |= TIOCM_RTS;
+ }
+ mct_u232_set_modem_ctrl(serial, control_state);
+ }
+
+ mct_u232_set_baud_rate(serial, cflag & CBAUD);
+
+ if ((cflag & CBAUD) == B0 ) {
+ dbg("%s: baud is B0", __FUNCTION__);
+ /* Drop RTS and DTR */
+ control_state &= ~(TIOCM_DTR | TIOCM_RTS);
+ mct_u232_set_modem_ctrl(serial, control_state);
}
/*
* Update line control register (LCR)
*/
- if ((cflag & (PARENB|PARODD)) != (old_cflag & (PARENB|PARODD))
- || (cflag & CSIZE) != (old_cflag & CSIZE)
- || (cflag & CSTOPB) != (old_cflag & CSTOPB) ) {
-
- priv->last_lcr = 0;
+ /* set the parity */
+ if (cflag & PARENB)
+ last_lcr |= (cflag & PARODD) ?
+ MCT_U232_PARITY_ODD : MCT_U232_PARITY_EVEN;
+ else
+ last_lcr |= MCT_U232_PARITY_NONE;
- /* set the parity */
- if (cflag & PARENB)
- priv->last_lcr |= (cflag & PARODD) ?
- MCT_U232_PARITY_ODD : MCT_U232_PARITY_EVEN;
- else
- priv->last_lcr |= MCT_U232_PARITY_NONE;
+ /* set the number of data bits */
+ switch (cflag & CSIZE) {
+ case CS5:
+ last_lcr |= MCT_U232_DATA_BITS_5; break;
+ case CS6:
+ last_lcr |= MCT_U232_DATA_BITS_6; break;
+ case CS7:
+ last_lcr |= MCT_U232_DATA_BITS_7; break;
+ case CS8:
+ last_lcr |= MCT_U232_DATA_BITS_8; break;
+ default:
+ err("CSIZE was not CS5-CS8, using default of 8");
+ last_lcr |= MCT_U232_DATA_BITS_8;
+ break;
+ }
- /* set the number of data bits */
- switch (cflag & CSIZE) {
- case CS5:
- priv->last_lcr |= MCT_U232_DATA_BITS_5; break;
- case CS6:
- priv->last_lcr |= MCT_U232_DATA_BITS_6; break;
- case CS7:
- priv->last_lcr |= MCT_U232_DATA_BITS_7; break;
- case CS8:
- priv->last_lcr |= MCT_U232_DATA_BITS_8; break;
- default:
- err("CSIZE was not CS5-CS8, using default of 8");
- priv->last_lcr |= MCT_U232_DATA_BITS_8;
- break;
- }
+ /* set the number of stop bits */
+ last_lcr |= (cflag & CSTOPB) ?
+ MCT_U232_STOP_BITS_2 : MCT_U232_STOP_BITS_1;
- /* set the number of stop bits */
- priv->last_lcr |= (cflag & CSTOPB) ?
- MCT_U232_STOP_BITS_2 : MCT_U232_STOP_BITS_1;
+ mct_u232_set_line_ctrl(serial, last_lcr);
- mct_u232_set_line_ctrl(serial, priv->last_lcr);
- }
-
/*
* Set flow control: well, I do not really now how to handle DTR/RTS.
* Just do what we have seen with SniffUSB on Win98.
*/
- if( (iflag & IXOFF) != (old_iflag & IXOFF)
- || (iflag & IXON) != (old_iflag & IXON)
- || (cflag & CRTSCTS) != (old_cflag & CRTSCTS) ) {
-
- /* Drop DTR/RTS if no flow control otherwise assert */
- if ((iflag & IXOFF) || (iflag & IXON) || (cflag & CRTSCTS) )
- priv->control_state |= TIOCM_DTR | TIOCM_RTS;
- else
- priv->control_state &= ~(TIOCM_DTR | TIOCM_RTS);
- mct_u232_set_modem_ctrl(serial, priv->control_state);
+ /* Drop DTR/RTS if no flow control otherwise assert */
+ new_state = control_state;
+ if ((iflag & IXOFF) || (iflag & IXON) || (cflag & CRTSCTS))
+ new_state |= TIOCM_DTR | TIOCM_RTS;
+ else
+ new_state &= ~(TIOCM_DTR | TIOCM_RTS);
+ if (new_state != control_state) {
+ mct_u232_set_modem_ctrl(serial, control_state);
+ control_state = new_state;
}
-} /* mct_u232_set_termios */
+ /* save off the modified port settings */
+ spin_lock_irqsave(&priv->lock, flags);
+ priv->control_state = control_state;
+ priv->last_lcr = last_lcr;
+ spin_unlock_irqrestore(&priv->lock, flags);
+} /* mct_u232_set_termios */
static void mct_u232_break_ctl( struct usb_serial_port *port, int break_state )
{
struct usb_serial *serial = port->serial;
struct mct_u232_private *priv = (struct mct_u232_private *)port->private;
- unsigned char lcr = priv->last_lcr;
+ unsigned char lcr;
+ unsigned long flags;
dbg("%sstate=%d", __FUNCTION__, break_state);
+ spin_lock_irqsave(&priv->lock, flags);
+ lcr = priv->last_lcr;
+ spin_unlock_irqrestore(&priv->lock, flags);
+
if (break_state)
lcr |= MCT_U232_SET_BREAK;
@@ -760,7 +791,8 @@ static int mct_u232_ioctl (struct usb_se
struct usb_serial *serial = port->serial;
struct mct_u232_private *priv = (struct mct_u232_private *)port->private;
int mask;
-
+ unsigned long flags;
+
dbg("%scmd=0x%x", __FUNCTION__, cmd);
/* Based on code from acm.c and others */
@@ -775,6 +807,7 @@ static int mct_u232_ioctl (struct usb_se
if (get_user(mask, (unsigned long *) arg))
return -EFAULT;
+ spin_lock_irqsave(&priv->lock, flags);
if ((cmd == TIOCMSET) || (mask & TIOCM_RTS)) {
/* RTS needs set */
if( ((cmd == TIOCMSET) && (mask & TIOCM_RTS)) ||
@@ -792,6 +825,7 @@ static int mct_u232_ioctl (struct usb_se
else
priv->control_state &= ~TIOCM_DTR;
}
+ spin_unlock_irqrestore(&priv->lock, flags);
mct_u232_set_modem_ctrl(serial, priv->control_state);
break;
-------------------------------------------------------
This SF.Net email is sponsored by: SourceForge.net Broadband
Sign-up now for SourceForge Broadband and get the fastest
6.0/768 connection for only $19.95/mo for the first 3 months!
http://ads.osdn.com/?ad_id=2562&alloc_id=6184&op=click
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
