On Tue, 4 May 2004 12:44:37 -0700 Pete Zaitcev <[EMAIL PROTECTED]> wrote:
> > I have purchased SanDisk SDDR-75 card reader, since it was reported on
> > quite few places to work (even with RH 7.3) ok on Linux.
> > However, I am experiencing problems with it, as well as with another
> > reader I have (Apacer AP-MSCRU10).
> >
> > Kernel is 2.4.26 (tried 2.4.25 as well), on RedHat 9. System is
> > XP2500, on NForce2 motherboard.
>
> > I can provide much more details []
>
> At this point I suspect SMP (of hyperthreaded variety, perhaps).
> I must admit there's little chance I might be able to look at this
> in detail. Do this... get dmesg, /proc/interrupts,
> /proc/bus/usb/devices,/proc/cpuinfo. The /var/log/messages is a
> substitute for dmesg, but we'll need a complete one. Send it to
> [EMAIL PROTECTED] and
> perhaps cc: to mdharm-usb at one-eyed-alien not net.
> nForce is known to be kinky, although I cannot quite put my
> finger on it.
Pete,
Thanks for the followup, and sorry for the late reply (was overloaded with
other things).
I just experienced a new crash (didn't do anything with CF reader for few
days, and tried to use it today again), so here are some details.
Basically, I was trying to write WISP-DIST (Leaf) image to the CF, and
system froze completely. This happens whenever I do some write operations
(copying more than 2-3MB to CF, for example) to CF itself. It doesn't
matter if I use dd or I mount device before I try writing to it.
I took part of /var/log/messages and it is attached ("msg1" - few lines at
the top are just before the crash). "msg2" file is output from dmesg, when
CF reader (Apacer) is connected to USB.
[EMAIL PROTECTED] log]# cat /proc/interrupts
CPU0
0: 6196349 XT-PIC timer
1: 9902 XT-PIC keyboard
2: 0 XT-PIC cascade
3: 10 XT-PIC serial
5: 7 XT-PIC Ricoh Co Ltd RL5c475
8: 1 XT-PIC rtc
10: 19567 XT-PIC usb-ohci
11: 104079 XT-PIC ehci_hcd, eth0
12: 36 XT-PIC usb-ohci, NVIDIA nForce Audio
14: 68532 XT-PIC ide0
15: 1129 XT-PIC ide1
NMI: 0
LOC: 6196202
ERR: 1860
MIS: 0
[EMAIL PROTECTED] log]# cat /proc/bus/usb/devices
T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 6
B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.04
S: Manufacturer=Linux 2.4.26 ehci_hcd
S: Product=nVidia Corporation nForce2 USB Controller
S: SerialNumber=00:02.2
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=256ms
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 3
B: Alloc= 93/900 us (10%), #Int= 1, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB OHCI Root Hub
S: SerialNumber=f8a1d000
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=1.5 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=046d ProdID=c00e Rev=11.00
S: Manufacturer=Logitech
S: Product=USB-PS/2 Optical Mouse
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr= 98mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=hid
E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=10ms
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 3
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB OHCI Root Hub
S: SerialNumber=f8a1b000
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0d7d ProdID=0240 Rev= 1.00
S: Manufacturer=
S: Product=USB Reader
S: SerialNumber=03231B00066A
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=83(I) Atr=03(Int.) MxPS= 2 Ivl=1ms
[EMAIL PROTECTED] log]# cat /proc/cpuinfo
processor : 0
vendor_id : AuthenticAMD
cpu family : 6
model : 10
model name : AMD Athlon(tm) XP 2500+
stepping : 0
cpu MHz : 1837.503
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca
cmov pat pse36 mmx fxsr sse syscall mmxext 3dnowext 3dnow
bogomips : 3670.01
If any more details are required, let me know.
Thanks.
Vanja
msg1
Description: Binary data
msg2
Description: Binary data
