ChangeSet 1.1848, 2004/06/07 14:05:59-07:00, [EMAIL PROTECTED]
[PATCH] USB: Fix problems with cyberjack usb-serial-module since kernel 2.6.2
> Send me a patch to back those changes out to fix your device and I'll
> apply it. If the author is around to realize this, that should wake
> them up :)
Ok, here you are! :)
Attached is a patch for linux-2.6.7-rc2. (though the patch hasn't changed
since -rc1)
Again a short description:
(the patch removes most of the changes done in linux-2.6.2)
1. Removed the local buffer of cyberjack_write, because something goes wrong
upon a write-request bigger than the buffer. Without this, a write-request
stalls with error -3.
2. Removed some usb_clear_halt() lines. Without this, the device doesn't even
open and returns -7.
It works for my cyberjack pinpad USB card reader on
- nforce2 chipset
- VIA KM266 chipset
- AMD Irongate chipset
Signed-off-by: Greg Kroah-Hartman <[EMAIL PROTECTED]>
drivers/usb/serial/cyberjack.c | 21 ++++++---------------
1 files changed, 6 insertions(+), 15 deletions(-)
diff -Nru a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c
--- a/drivers/usb/serial/cyberjack.c Mon Jun 7 14:42:14 2004
+++ b/drivers/usb/serial/cyberjack.c Mon Jun 7 14:42:14 2004
@@ -109,7 +109,7 @@
short rdtodo; /* Bytes still to read */
unsigned char wrbuf[5*64]; /* Buffer for collecting data to write */
short wrfilled; /* Overall data size we already got */
- short wrsent; /* Data akready sent */
+ short wrsent; /* Data already sent */
};
/* do some startup allocations not currently performed by usb_serial_probe() */
@@ -159,8 +159,6 @@
dbg("%s - usb_clear_halt", __FUNCTION__ );
usb_clear_halt(port->serial->dev, port->write_urb->pipe);
- usb_clear_halt(port->serial->dev, port->read_urb->pipe);
- usb_clear_halt(port->serial->dev, port->interrupt_in_urb->pipe);
/* force low_latency on so that our tty_push actually forces
* the data through, otherwise it is scheduled, and with high
@@ -212,7 +210,6 @@
unsigned long flags;
int result;
int wrexpected;
- unsigned char localbuf[CYBERJACK_LOCAL_BUF_SIZE]; /* Buffer for
collecting data to write */
dbg("%s - port %d", __FUNCTION__, port->number);
dbg("%s - from_user %d", __FUNCTION__, from_user);
@@ -229,28 +226,22 @@
spin_lock_irqsave(&priv->lock, flags);
- if( (count+priv->wrfilled)>sizeof(priv->wrbuf) ||
- (count>sizeof(localbuf)) ) {
- /* To much data for buffer. Reset buffer. */
+ if( (count+priv->wrfilled)>sizeof(priv->wrbuf) ) {
+ /* To much data for buffer. Reset buffer. */
priv->wrfilled=0;
spin_unlock_irqrestore(&priv->lock, flags);
return (0);
}
- spin_unlock_irqrestore(&priv->lock, flags);
-
/* Copy data */
if (from_user) {
- if (copy_from_user(localbuf, buf, count)) {
+ if (copy_from_user(priv->wrbuf+priv->wrfilled, buf, count)) {
+ spin_unlock_irqrestore(&priv->lock, flags);
return -EFAULT;
}
} else {
- memcpy (localbuf, buf, count);
+ memcpy (priv->wrbuf+priv->wrfilled, buf, count);
}
-
- spin_lock_irqsave(&priv->lock, flags);
-
- memcpy (priv->wrbuf+priv->wrfilled, localbuf, count);
usb_serial_debug_data (__FILE__, __FUNCTION__, count,
priv->wrbuf+priv->wrfilled);
-------------------------------------------------------
This SF.Net email is sponsored by: GNOME Foundation
Hackers Unite! GUADEC: The world's #1 Open Source Desktop Event.
GNOME Users and Developers European Conference, 28-30th June in Norway
http://2004/guadec.org
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
