I am testing NetChip 2280 RDK. In target PC, Linux(2.4.23) is installed and RDK is set. I loaded the net2280 module And, I loaded the g_zero module. In Host PC, Linux(2.6.7) is also installed and I typed "testusb -a". Output is below.. ---------------------------------------------------- Unknown speed /proc/bus/usb/001/002 /proc/bus/usb/001/002 test 0 took 0.000000 sec
----------------------------------------------------- Maybe,,, âtestusb âaâ is run, but above message is allâ. I guess that there are more something, and once I type âtestusb âaâ, any command about usb ( /sbin/lsusb,, and so on) does not operate. Before typing âtestusb âaâ, /sbin/lsusb shows that NetChip is loaded, but after typing âtestusb âaâ, /sbin/lsusb is not run( shows nothing). In Target PC and Host PC, I configured the kernel(2.4.23 and 2.6.7) only with USB gadget support. (Other options are not selected). What is the problem? ------------------------------------------------------- This SF.Net email sponsored by Black Hat Briefings & Training. Attend Black Hat Briefings & Training, Las Vegas July 24-29 - digital self defense, top technical experts, no vendor pitches, unmatched networking opportunities. Visit www.blackhat.com _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
