Hello. I am using ‘tsestusb.c’ to test USB gadget driver. In the Web page, test is run to ‘test 8’. However, my output is different from that Web page. Here is my output : -------------------------------------------------- # testusb -a /proc/bus/usb/001/002 test 0, 0.000010 secs /proc/bus/usb/001/002 test 1, 0.196208 secs /proc/bus/usb/001/002 test 2, 0.135350 secs /proc/bus/usb/001/002 test 3, 0.146165 secs /proc/bus/usb/001/002 test 4, 0.307527 secs /proc/bus/usb/001/002 test 5, 1.479670 secs /proc/bus/usb/001/002 test 6, 0.820744 secs /proc/bus/usb/001/002 test 7, 1.258517 secs /proc/bus/usb/001/002 test 8, 0.764329 secs /proc/bus/usb/001/002 test 9, 1.410203 secs /proc/bus/usb/001/002 test 10, 1.636278 secs /proc/bus/usb/001/002 test 11, 0.870714 secs /proc/bus/usb/001/002 test 12, 0.547320 secs /proc/bus/usb/001/002 test 13, 3.363831 secs /proc/bus/usb/001/002 test 14 --> 22 (error 22) --------------------------------------------------- You can see that the last test is error.
Anyone who knows what test 14 performs tell me it in detail. ------------------------------------------------------- This SF.Net email sponsored by Black Hat Briefings & Training. Attend Black Hat Briefings & Training, Las Vegas July 24-29 - digital self defense, top technical experts, no vendor pitches, unmatched networking opportunities. Visit www.blackhat.com _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
