Begin forwarded message:
Date: Thu, 24 Jun 2004 09:32:40 -0700 From: [EMAIL PROTECTED] To: [EMAIL PROTECTED] Subject: [Bugme-new] [Bug 2949] New: Creative Muvo doesn't work on kernel 2.6 http://bugme.osdl.org/show_bug.cgi?id=2949 Summary: Creative Muvo doesn't work on kernel 2.6 Kernel Version: 2.6.x Status: NEW Severity: normal Owner: [EMAIL PROTECTED] Submitter: [EMAIL PROTECTED] Distribution: Mandrake 10 / Conectiva 10 Hardware Environment: Athlon XP 1.7 / Asus Motherboard A7S333 / 512Mb ram / 40Gb HD Software Environment: Conectiva 10 RC3 Problem Description: The usb-storage Creative Muvo doesn't work on kernel 2.6. On kernel 2.4 it works perfectly. Bellow is the /var/log/message generated: May 24 18:41:01 localhost kernel: scsi0 : SCSI emulation for USB Mass Storage devices May 24 18:41:01 localhost kernel: Vendor: CREATIVE Model: NOMAD_MUVO Rev: 0001 May 24 18:41:01 localhost kernel: Type: Direct-Access ANSI SCSI revision: 02 May 24 18:41:01 localhost kernel: drivers/usb/core/usb.c: registered new driver usb-storage May 24 18:41:01 localhost kernel: USB Mass Storage support registered. May 24 18:41:01 localhost scsi.agent[2314]: disk at /devices/pci0000:00/0000:00:02.3/usb2/2-1/2-1:1.0/host0/0:0:0:0 May 24 18:41:01 localhost modprobe: FATAL: Module scsimon not found. May 24 18:41:01 localhost kernel: SCSI device sda: 126977 512-byte hdwr sectors (65 MB) May 24 18:41:01 localhost kernel: sda: assuming Write Enabled May 24 18:41:01 localhost kernel: sda: assuming drive cache: write through May 24 18:41:01 localhost kernel: /dev/scsi/host0/bus0/target0/lun0:end_request: I/O error, dev sda, sector 126976 May 24 18:41:01 localhost kernel: Buffer I/O error on device sda, logical block 126976 May 24 18:42:01 localhost kernel: drivers/usb/core/hub.c: USB device not accepting new address (error=-110) May 24 18:42:01 localhost kernel: scsi: Device offlined - not ready after error recovery: host 0 channel 0 id 0 lun 0 May 24 18:42:01 localhost kernel: SCSI error : <0 0 0 0> return code = 0x50000 May 24 18:42:01 localhost kernel: end_request: I/O error, dev sda, sector 126976 May 24 18:42:01 localhost kernel: Buffer I/O error on device sda, logical block 126976 May 24 18:42:01 localhost kernel: p1 May 24 18:42:01 localhost kernel: Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0 May 24 18:42:01 localhost perl: drakupdate_fstab called with --auto --add /dev/scsi/host0/bus0/target0/lun0/part1 Steps to reproduce: - Just plug the Creative Muvo in any USB port and se the log... ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is. ------------------------------------------------------- This SF.Net email sponsored by Black Hat Briefings & Training. Attend Black Hat Briefings & Training, Las Vegas July 24-29 - digital self defense, top technical experts, no vendor pitches, unmatched networking opportunities. Visit www.blackhat.com _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
