[linux-usb-devel] AirPrime 5220 1xEV-DO card doesn't work under recent 2.6 kernels

[Ari Pollak]

Under 2.6.7-mm5 and every time I've tried under a 2.6 kernel, an 
AirPrime 5220 CardBus card (described at http://www.ka9q.net/5220.html) 
does not work properly.  In 2.6.7-mm5, after inserting the card and 
modprobe-ing ohci_hcd, dmesg shows the following and commands like lsusb 
just hang, and eventually my system becomes unusable because other 
devices stop working as well. Attempting to load usbserial doesn't find 
the device either.

Jul  8 01:34:20 ewok kernel: cs: pcmcia_socket1: unable to apply power.
Jul  8 01:34:20 ewok kernel: PCMCIA: socket ec8e5c2c: *** DANGER *** 
unable to remove socket power
Jul  8 01:34:21 ewok kernel: ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host 
Controller (OHCI) Driver (PCI)
Jul  8 01:34:21 ewok kernel: ohci_hcd: block sizes: ed 64 td 64
Jul  8 01:34:21 ewok kernel: PCI: Enabling device 0000:07:00.0 (0000 -> 
0002)
Jul  8 01:34:21 ewok kernel: ohci_hcd 0000:07:00.0: Lucent 
Microelectronics USS-312 USB Controller
Jul  8 01:34:21 ewok kernel: ohci_hcd 0000:07:00.0: reset, control = 0x0
Jul  8 01:34:22 ewok kernel: PCI: Setting latency timer of device 
0000:07:00.0 to 64
Jul  8 01:34:22 ewok kernel: ohci_hcd 0000:07:00.0: irq 11, pci mem f0c8f000
Jul  8 01:34:22 ewok kernel: ohci_hcd 0000:07:00.0: new USB bus 
registered, assigned bus number 5
Jul  8 01:34:22 ewok kernel: usb usb5: new device strings: Mfr=3, 
Product=2, SerialNumber=1
Jul  8 01:34:22 ewok kernel: usb usb5: default language 0x0409
Jul  8 01:34:22 ewok kernel: usb usb5: Product: Lucent Microelectronics 
USS-312 USB Controller
Jul  8 01:34:22 ewok kernel: usb usb5: Manufacturer: Linux 2.6.7-mm5 
ohci_hcd
Jul  8 01:34:22 ewok kernel: usb usb5: SerialNumber: 0000:07:00.0
Jul  8 01:34:22 ewok kernel: usb usb5: hotplug
Jul  8 01:34:22 ewok kernel: usb usb5: adding 5-0:1.0 (config #1, 
interface 0)
Jul  8 01:34:22 ewok kernel: usb 5-0:1.0: hotplug
Jul  8 01:34:22 ewok kernel: hub 5-0:1.0: usb_probe_interface
Jul  8 01:34:22 ewok kernel: hub 5-0:1.0: usb_probe_interface - got id
Jul  8 01:34:22 ewok kernel: hub 5-0:1.0: USB hub found
Jul  8 01:34:22 ewok kernel: hub 5-0:1.0: 2 ports detected
Jul  8 01:34:22 ewok kernel: hub 5-0:1.0: standalone hub
Jul  8 01:34:22 ewok kernel: hub 5-0:1.0: no power switching (usb 1.0)
Jul  8 01:34:22 ewok kernel: hub 5-0:1.0: global over-current protection
Jul  8 01:34:22 ewok kernel: hub 5-0:1.0: power on to power good time: 32ms
Jul  8 01:34:22 ewok kernel: hub 5-0:1.0: local power source is good
Jul  8 01:34:22 ewok kernel: hub 5-0:1.0: no over-current condition exists
Jul  8 01:34:22 ewok kernel: ohci_hcd 0000:07:00.0: created debug files
Jul  8 01:34:22 ewok kernel: ohci_hcd 0000:07:00.0: OHCI controller state
Jul  8 01:34:22 ewok kernel: ohci_hcd 0000:07:00.0: OHCI 1.0, with 
legacy support registers
Jul  8 01:34:22 ewok kernel: ohci_hcd 0000:07:00.0: control 0x083 
HCFS=operational CBSR=3
Jul  8 01:34:22 ewok kernel: ohci_hcd 0000:07:00.0: cmdstatus 0x00000 SOC=0
Jul  8 01:34:22 ewok kernel: ohci_hcd 0000:07:00.0: intrstatus 
0x00000044 RHSC SF
Jul  8 01:34:22 ewok kernel: ohci_hcd 0000:07:00.0: intrenable 
0x8000001a MIE UE RD WDH
Jul  8 01:34:22 ewok kernel: ohci_hcd 0000:07:00.0: hcca frame #003f
Jul  8 01:34:22 ewok kernel: ohci_hcd 0000:07:00.0: roothub.a 10000202 
POTPGT=16 NPS NDP=2
Jul  8 01:34:22 ewok kernel: ohci_hcd 0000:07:00.0: roothub.b 00000000 
PPCM=0000 DR=0000
Jul  8 01:34:22 ewok kernel: ohci_hcd 0000:07:00.0: roothub.status 
00008000 DRWE
Jul  8 01:34:22 ewok kernel: ohci_hcd 0000:07:00.0: roothub.portstatus 
[0] 0x00000100 PPS
Jul  8 01:34:22 ewok kernel: ohci_hcd 0000:07:00.0: roothub.portstatus 
[1] 0x00000100 PPS
Jul  8 01:34:22 ewok kernel: ohci_hcd 0000:07:00.0: suspend root hub
Jul  8 01:34:23 ewok kernel: ohci_hcd 0000:07:00.0: remote wakeup
Jul  8 01:34:23 ewok kernel: ohci_hcd 0000:07:00.0: GetStatus 
roothub.portstatus [1] = 0x00010101 CSC PPS CCS
Jul  8 01:34:23 ewok kernel: hub 5-0:1.0: port 1, status 0101, change 
0001, 12 Mb/s
Jul  8 01:34:23 ewok kernel: hub 5-0:1.0: debounce: port 1: total 100ms 
stable 100ms status 0x101
Jul  8 01:34:23 ewok kernel: ohci_hcd 0000:07:00.0: GetStatus 
roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS
Jul  8 01:34:23 ewok kernel: usb 5-1: new full speed USB device using 
address 2
Jul  8 01:34:24 ewok kernel: ohci_hcd 0000:07:00.0: urb c054b200 path 1 
ep0out 57120000 cc 5 --> status -110
Jul  8 01:34:24 ewok kernel: ohci_hcd 0000:07:00.0: urb c054b200 path 1 
ep0out 56c20000 cc 5 --> status -110
Jul  8 01:34:25 ewok kernel: usb 5-1: device not accepting address 2, 
error -110
Jul  8 01:34:25 ewok kernel: ohci_hcd 0000:07:00.0: GetStatus 
roothub.portstatus [1] = 0x00130103 PRSC PESC CSC PPS PES CCS
Jul  8 01:34:25 ewok kernel: hub 5-0:1.0: port 1 not enabled, trying 
reset again...
Jul  8 01:34:25 ewok kernel: ohci_hcd 0000:07:00.0: GetStatus 
roothub.portstatus [1] = 0x00130103 PRSC PESC CSC PPS PES CCS
Jul  8 01:34:25 ewok kernel: hub 5-0:1.0: port 1 not enabled, trying 
reset again...
Jul  8 01:34:25 ewok kernel: ohci_hcd 0000:07:00.0: GetStatus 
roothub.portstatus [1] = 0x00130103 PRSC PESC CSC PPS PES CCS
Jul  8 01:34:25 ewok kernel: hub 5-0:1.0: port 1 not enabled, trying 
reset again...
Jul  8 01:34:25 ewok kernel: ohci_hcd 0000:07:00.0: GetStatus 
roothub.portstatus [1] = 0x00130103 PRSC PESC CSC PPS PES CCS
Jul  8 01:34:25 ewok kernel: hub 5-0:1.0: port 1 not enabled, trying 
reset again...
Jul  8 01:34:25 ewok kernel: ohci_hcd 0000:07:00.0: GetStatus 
roothub.portstatus [1] = 0x00130103 PRSC PESC CSC PPS PES CCS
Jul  8 01:34:25 ewok kernel: hub 5-0:1.0: port 1 not enabled, trying 
reset again...
Jul  8 01:34:25 ewok kernel: hub 5-0:1.0: Cannot enable port 1.  Maybe 
the USB cable is bad?
Jul  8 01:34:25 ewok kernel: ohci_hcd 0000:07:00.0: GetStatus 
roothub.portstatus [1] = 0x00130101 PRSC PESC CSC PPS CCS
Jul  8 01:34:25 ewok kernel: hub 5-0:1.0: reset change on port 1
Jul  8 01:34:25 ewok kernel: hub 5-0:1.0: port 1, status 0101, change 
0013, 12 Mb/s
Jul  8 01:34:26 ewok kernel: hub 5-0:1.0: debounce: port 1: total 100ms 
stable 100ms status 0x101
Jul  8 01:34:26 ewok kernel: ohci_hcd 0000:07:00.0: GetStatus 
roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS
Jul  8 01:34:26 ewok kernel: usb 5-1: new full speed USB device using 
address 4
Jul  8 01:34:31 ewok kernel: usb 5-1: control timeout on ep0in


-------------------------------------------------------
This SF.Net email sponsored by Black Hat Briefings & Training.
Attend Black Hat Briefings & Training, Las Vegas July 24-29 - 
digital self defense, top technical experts, no vendor pitches, 
unmatched networking opportunities. Visit www.blackhat.com
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel