Le mer 07/07/2004 à 18:09, Alan Stern a écrit : > Yes. The difference you saw (checking whether max_sectors has already > been set to a lower value) was a change that evidently didn't get added in > time to appear in 2.6.7. What you did is fine.
... and this indeed made my Genesys-based USB-to-IDE converter work with 2.6.7, both for write and read commands. I transferred over 14G of data with no problem. Only after some operations the drive became write-protected, I had to unmount / remount it, but otherwise everything was fine. I experienced upload rates from 6 to 20 MBps (but the FAT partition on the drive might cause problems too, it's an old, messy one). Somehow I lost my network when using this config, but I seem to recall a thread about that too, I'll dig into that later. Thanks to everyone who made it possible! Of course I'm available to test any change/enhancement that you guys would want to add... -- Alexandre Aractingi <[EMAIL PROTECTED]> ------------------------------------------------------- This SF.Net email sponsored by Black Hat Briefings & Training. Attend Black Hat Briefings & Training, Las Vegas July 24-29 - digital self defense, top technical experts, no vendor pitches, unmatched networking opportunities. Visit www.blackhat.com _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
