this is what the kernel says when I plug in this Lacie
USB HD (model
EK0-U-HD-705475). After plugging it in "cat
/proc/scsi/scsi" returns nothing.
Thanks,
Chris
<7>ehci_hcd 0000:00:02.2: GetStatus port 1 status
003802 POWER OWNER sig=j
CSC
<7>hub 1-0:1.0: port 1, status 0, change 1, 12 Mb/s
<7>ehci_hcd 0000:00:02.2: GetStatus port 2 status
003802 POWER OWNER sig=j
CSC
<7>hub 1-0:1.0: port 2, status 0, change 1, 12 Mb/s
<7>ehci_hcd 0000:00:02.2: GetStatus port 3 status
003402 POWER OWNER sig=k
CSC
<7>hub 1-0:1.0: port 3, status 0, change 1, 12 Mb/s
<7>ehci_hcd 0000:00:02.2: GetStatus port 4 status
003802 POWER OWNER sig=j
CSC
<7>hub 1-0:1.0: port 4, status 0, change 1, 12 Mb/s
<7>ehci_hcd 0000:00:02.2: GetStatus port 5 status
001803 POWER sig=j CSC
CONNECT
<7>hub 1-0:1.0: port 5, status 501, change 1, 480 Mb/s
<7>hub 1-0:1.0: debounce: port 5: delay 100ms stable 4
status 0x501
<7>ehci_hcd 0000:00:02.2: port 5 full speed -->
companion
<7>ehci_hcd 0000:00:02.2: GetStatus port 5 status
003001 POWER OWNER sig=se0
CONNECT
<7>ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus
[3] = 0x00010101 CSC
PPS CCS
<7>hub 2-0:1.0: port 3, status 101, change 1, 12 Mb/s
<7>hub 2-0:1.0: debounce: port 3: delay 100ms stable 4
status 0x101
<7>ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus
[3] = 0x00100103 PRSC
PPS PES CCS
<6>usb 2-3: new full speed USB device using address 16
<7>usb 2-3: new device strings: Mfr=1, Product=2,
SerialNumber=0
<7>drivers/usb/core/message.c: USB device number 16
default language ID 0x409
<6>usb 2-3: Product: USB Mass STORAGE
<6>usb 2-3: Manufacturer: LaCie
<7>drivers/usb/core/usb.c: usb_hotplug
<7>usb 2-3: registering 2-3:1.0 (config #1, interface
0)
<7>drivers/usb/core/usb.c: usb_hotplug
<7>usb-storage 2-3:1.0: usb_probe_interface
<7>usb-storage 2-3:1.0: usb_probe_interface - got id
<7>usb-storage: USB Mass Storage device detected
<7>usb-storage: act_altsetting is 0, id_index is 41
<7>usb-storage: -- associate_dev
<7>usb-storage: Vendor: LaCie
<7>usb-storage: Product: USB Hard Disk
<5>usb-storage: This device (059f,a601,0200 S 01 P 01)
has unneeded SubClass
and Protocol entries in unusual_devs.h
<4> Please send a copy of this message to
<[EMAIL PROTECTED]>
<7>usb-storage: Transport: Control/Bulk
<7>usb-storage: Protocol: Reduced Block Commands (RBC)
<7>usb-storage: Endpoints: In: 0xf69a2140 Out:
0xf69a2154 Int: 0xf69a2168
(Period 100)
<7>usb-storage: *** thread sleeping.
<6>scsi16 : SCSI emulation for USB Mass Storage
devices
<7>usb-storage: queuecommand called
<7>usb-storage: *** thread awakened.
<7>usb-storage: Command INQUIRY (6 bytes)
<7>usb-storage: 00 00 00 24 00
<7>usb-storage: usb_stor_ctrl_transfer: rq=00
rqtype=21 value=0000 index=00
len=6
<7>usb-storage: command_abort called
<7>usb-storage: usb_stor_stop_transport called
<7>usb-storage: -- cancelling URB
<7>usb-storage: Status code -104; transferred 6/6
<7>usb-storage: -- transfer cancelled
<7>usb-storage: Call to usb_stor_ctrl_transfer()
returned 4
<7>usb-storage: -- command was aborted
<7>usb-storage: scsi command aborted
<7>usb-storage: *** thread sleeping.
<7>usb-storage: queuecommand called
<7>usb-storage: *** thread awakened.
<7>usb-storage: Command TEST_UNIT_READY (6 bytes)
<7>usb-storage: 00 00 00 00 00 00
<7>usb-storage: usb_stor_ctrl_transfer: rq=00
rqtype=21 value=0000 index=00
len=6
<7>usb-storage: command_abort called
<7>usb-storage: usb_stor_stop_transport called
<7>usb-storage: -- cancelling URB
<7>usb-storage: Timeout -- cancelling URB
<7>usb-storage: Soft reset failed: -104
<7>usb-storage: bus_reset called
____________________________________________________________
Yahoo! Companion - Scarica gratis la toolbar di Ricerca di Yahoo!
http://companion.yahoo.it
-------------------------------------------------------
This SF.Net email is sponsored by OSTG. Have you noticed the changes on
Linux.com, ITManagersJournal and NewsForge in the past few weeks? Now,
one more big change to announce. We are now OSTG- Open Source Technology
Group. Come see the changes on the new OSTG site. www.ostg.com
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
