Hi, I have problem with Creative Wireless 6000 mouse. The cursor movement is not smooth, instead it jumps. I'm sure not all events from the mouse are reported in /dev/input/mice. For example: when I move mouse around in galeon window and press right button the popup menu sometimes doesn't show up, also a lot of mouse movements are lost. I have abit nf7-s (nforce2) mobo with athlon 2.4, tried kernel 2.6.7 and 2.6.8-rc2. No problem with win2k.
Here is my /proc/bus/usb/devices: T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 3 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 2.06 S: Manufacturer=Linux 2.6.7 ohci_hcd S: Product=nVidia Corporation nForce2 USB Controller (#2) S: SerialNumber=0000:00:02.1 C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 3 B: Alloc= 26/900 us ( 3%), #Int= 2, #Iso= 0 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 2.06 S: Manufacturer=Linux 2.6.7 ohci_hcd S: Product=nVidia Corporation nForce2 USB Controller S: SerialNumber=0000:00:02.0 C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=1.5 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0419 ProdID=0600 Rev= 0.20 S: Manufacturer= S: Product= Wireless Keyboard mouse C:* #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=01 Driver=usbhid E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=10ms I: If#= 1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid E: Ad=82(I) Atr=03(Int.) MxPS= 5 Ivl=10ms T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 6 B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 2.06 S: Manufacturer=Linux 2.6.7 ehci_hcd S: Product=nVidia Corporation nForce2 USB Controller S: SerialNumber=0000:00:02.2 C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=256ms some dmesg messages: Freeing unused kernel memory: 132k freed hub 1-0:1.0: debounce: port 1: delay 100ms stable 4 status 0x501 ehci_hcd 0000:00:02.2: port 1 low speed --> companion ohci_hcd 0000:00:02.0: remote wakeup ehci_hcd 0000:00:02.2: GetStatus port 1 status 003402 POWER OWNER sig=k CSC ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [1] = 0x00010301 CSC LSDA PPS CCS hub 2-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s hub 2-0:1.0: debounce: port 1: delay 100ms stable 4 status 0x301 ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [1] = 0x00100303 PRSC LSDA PPS PES CCS usb 2-1: new low speed USB device using address 2 ohci_hcd 0000:00:02.0: urb c1574158 path 1 ep0out 5ec20000 cc 5 --> status -110 ohci_hcd 0000:00:02.0: urb c1574158 path 1 ep0out 5ec20000 cc 5 --> status -110 usb 2-1: device not accepting address 2, error -110 ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [1] = 0x00100303 PRSC LSDA PPS PES CCS usb 2-1: new low speed USB device using address 3 usb 2-1: skipped 1 descriptor after interface usb 2-1: skipped 1 descriptor after interface usb 2-1: new device strings: Mfr=1, Product=2, SerialNumber=0 usb 2-1: default language 0x0409 usb 2-1: Product: Wireless Keyboard mouse usb 2-1: Manufacturer: usb 2-1: hotplug usb 2-1: adding 2-1:1.0 (config #1, interface 0) usb 2-1:1.0: hotplug usbhid 2-1:1.0: usb_probe_interface usbhid 2-1:1.0: usb_probe_interface - got id drivers/usb/input/hid-core.c: ctrl urb status -32 received input: USB HID v1.00 Keyboard [ Wireless Keyboard mouse] on usb-0000:00:02.0-1 usb 2-1: adding 2-1:1.1 (config #1, interface 1) usb 2-1:1.1: hotplug usbhid 2-1:1.1: usb_probe_interface usbhid 2-1:1.1: usb_probe_interface - got id drivers/usb/input/hid-core.c: ctrl urb status -32 received drivers/usb/input/hid-core.c: ctrl urb status -32 received drivers/usb/input/hid-core.c: ctrl urb status -32 received input: USB HID v1.00 Mouse [ Wireless Keyboard mouse] on usb-0000:00:02.0-1 thanks for any help. ks ------------------------------------------------------- This SF.Net email is sponsored by OSTG. Have you noticed the changes on Linux.com, ITManagersJournal and NewsForge in the past few weeks? Now, one more big change to announce. We are now OSTG- Open Source Technology Group. Come see the changes on the new OSTG site. www.ostg.com _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
